fsSnoopVlanRtrLocalPortList
SUPERMICRO-SNOOP-MIB ·
.1.3.6.1.4.1.10876.101.1.105.3.8.1.9
Object
List of ports which are configured statically as router ports. Each bit in this object represent interfaces denoted by the object fsVcHlPortId associated to the instance identifier denoted by fsSnoopVlanFilterInstId. This object alone should be referred in environments where the number of interfaces in the system is scaled to a large value , as the object fsSnoopVlanRtrPortList may not be sufficient to represent the full set of interfaces in each switch instance.
Context
- MIB
- SUPERMICRO-SNOOP-MIB
- OID
.1.3.6.1.4.1.10876.101.1.105.3.8.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsSnoopVlanFilterXEntry
- Table
- fsSnoopVlanFilterXTable
- Siblings
- 9
Syntax
Q-BRIDGE-MIBPortList
- Source
- Q-BRIDGE-MIBPortList
- Base type
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsSnoopVlanBlkRtrPortList List of ports which are configured statically as blocked router
ports statically. This object may not be sufficient to represent
full set of interfaces in each switch instance i… | column | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.10876.101.1.105.3.8.1.1 |
| fsSnoopVlanBlkRtrLocalPortList List of ports which are configured statically as blocked router
ports. Each bit in this object represent interfaces denoted by
the object fsVcHlPortId associated to the instance… | column | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.10876.101.1.105.3.8.1.10 |
| fsSnoopVlanFilterMaxLimitType Indicates the type of limit to be applied on this VLAN.
Setting as 'channels' indicates that the limit is set for
channel (group, source) registrations whereas setting as
'grou… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.105.3.8.1.2 |
| fsSnoopVlanFilterMaxLimit Sets the maximum number of unique entries (channel or group)
that can be learned simultaneously on this VLAN. The
fsSnoopVlanFilterMaxLimitType must be set before configuring
t… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.1.105.3.8.1.3 |
| fsSnoopVlanFilter8021pPriority Configures the priority with which the reports assigned to this
VLAN should be processed by the hardware as well as by the
upstream router. Priority 0 means lowest priority while … | column | Integer32 | .1.3.6.1.4.1.10876.101.1.105.3.8.1.4 |
| fsSnoopVlanFilterDropReports Some implementations might require that IGMPv1 should not be
supported, as IGMPv1 does not have any group leaving mechanism.
Some other implementations might require that both IGM… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.105.3.8.1.5 |
| fsSnoopVlanMulticastProfileId This object contains the multicast profile id configured for a
particular VLAN and is used for multicast vlan classification.
When any untagged report or leave message is receive… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.1.105.3.8.1.6 |
| fsSnoopVlanPortPurgeInterval This is the interval (in seconds) after which a learnt
port entry will be purged. For each port on which report
has been received,this timer runs for 'PortPurgeInterval'
seconds… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.105.3.8.1.7 |
| fsSnoopVlanMaxResponseTime The maximum response code advertised in queries send over this
vlan.This object is used to configure max response code for
both IGS and MLDS.Minimum value for the object is zero f… | column | Integer32 | .1.3.6.1.4.1.10876.101.1.105.3.8.1.8 |