fsSnoopVlanFilterMaxLimit
SUPERMICRO-SNOOP-MIB ·
.1.3.6.1.4.1.10876.101.1.105.3.8.1.3
Object
Sets the maximum number of unique entries (channel or group) that can be learned simultaneously on this VLAN. The fsSnoopVlanFilterMaxLimitType must be set before configuring this object. If fsSnoopVlanFilterMaxLimitType is 'channels', this limit applies to number of channels that can be joined on this VLAN. If fsSnoopVlanFilterMaxLimitType is 'groups', this limit applies to number of groups that can be joined on this VLAN. By default, this object will hold a value of zero and will not limit any IGMP packets as long as the value of fsSnoopVlanFilterMaxLimitType is set to 'none'. However, when fsSnoopVlanFilterMaxLimitType is set to 'groups' or 'channels', if this object has the value of zero, then no IGMP reports will be processed on this interface. The maximum value supported by this object is dependent on the maximum groups or channels registrations that the system can support.
Context
- MIB
- SUPERMICRO-SNOOP-MIB
- OID
.1.3.6.1.4.1.10876.101.1.105.3.8.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsSnoopVlanFilterXEntry
- Table
- fsSnoopVlanFilterXTable
- Siblings
- 9
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsSnoopVlanBlkRtrPortList List of ports which are configured statically as blocked router
ports statically. This object may not be sufficient to represent
full set of interfaces in each switch instance i… | column | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.10876.101.1.105.3.8.1.1 |
| fsSnoopVlanBlkRtrLocalPortList List of ports which are configured statically as blocked router
ports. Each bit in this object represent interfaces denoted by
the object fsVcHlPortId associated to the instance… | column | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.10876.101.1.105.3.8.1.10 |
| fsSnoopVlanFilterMaxLimitType Indicates the type of limit to be applied on this VLAN.
Setting as 'channels' indicates that the limit is set for
channel (group, source) registrations whereas setting as
'grou… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.105.3.8.1.2 |
| fsSnoopVlanFilter8021pPriority Configures the priority with which the reports assigned to this
VLAN should be processed by the hardware as well as by the
upstream router. Priority 0 means lowest priority while … | column | Integer32 | .1.3.6.1.4.1.10876.101.1.105.3.8.1.4 |
| fsSnoopVlanFilterDropReports Some implementations might require that IGMPv1 should not be
supported, as IGMPv1 does not have any group leaving mechanism.
Some other implementations might require that both IGM… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.105.3.8.1.5 |
| fsSnoopVlanMulticastProfileId This object contains the multicast profile id configured for a
particular VLAN and is used for multicast vlan classification.
When any untagged report or leave message is receive… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.1.105.3.8.1.6 |
| fsSnoopVlanPortPurgeInterval This is the interval (in seconds) after which a learnt
port entry will be purged. For each port on which report
has been received,this timer runs for 'PortPurgeInterval'
seconds… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.105.3.8.1.7 |
| fsSnoopVlanMaxResponseTime The maximum response code advertised in queries send over this
vlan.This object is used to configure max response code for
both IGS and MLDS.Minimum value for the object is zero f… | column | Integer32 | .1.3.6.1.4.1.10876.101.1.105.3.8.1.8 |
| fsSnoopVlanRtrLocalPortList List of ports which are configured statically as router ports.
Each bit in this object represent interfaces denoted by the
object fsVcHlPortId associated to the instance identif… | column | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.10876.101.1.105.3.8.1.9 |