fsSnoopTraceOption
SUPERMICRO-SNOOP-MIB ·
.1.3.6.1.4.1.10876.101.1.105.2.2.1.11
Object
This object is used to enable trace statements in
snooping module.
A four byte integer is used for enabling the trace level.
Each bit in the four byte integer represents a particular
trace level.
The mapping between the bit positions & the trace level is
as follows:
0 - Init and Shutdown traces
1 - Management traces
2 - Data Path traces
3 - Control Plane traces
4 - Packet Dump traces
5 - Traces related to all resources except buffers
6 - All Failure traces
7 - Buffer allocation/release traces
The remaining bits are unused. Combination of levels are
also allowed.
For example if the bits 0 and 1 are set, then the trace
statement related to Init-Shutdown and management
will be printed.
The user has to enter the corresponding integer value for the
bits set. For example if bits 0 and 1 are to be set ,then user
has to give the value 3.
Context
- MIB
- SUPERMICRO-SNOOP-MIB
- OID
.1.3.6.1.4.1.10876.101.1.105.2.2.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsSnoopInstanceConfigEntry
- Table
- fsSnoopInstanceConfigTable
- Siblings
- 18
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsSnoopInstanceConfigInstId Instance ID pertaining to the global configuration entry. | column | Integer32 | .1.3.6.1.4.1.10876.101.1.105.2.2.1.1 |
| fsSnoopReportFwdOnAllPorts In snooping mode, Snooping module will forward reports only
on router ports by default. This object provides administrative
control either to forward the reports on all the membe… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.105.2.2.1.10 |
| fsSnoopOperStatus The operational status of the IGS/MLDS protocol.
The value enabled(1) indicates the IGS/MLDS module is currently
enabled in the system.
The value disable(1) indicates the IGS/MLDS… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.105.2.2.1.12 |
| fsSnoopSendQueryOnTopoChange The Snooping Switch can be configured to send IGMP/MLD General
queries on all non router ports when spanning tree topology
change occurs in a network. If the spanning tree mode i… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.105.2.2.1.13 |
| fsSnoopSendLeaveOnTopoChange The Snooping Switch can be configured to issue an IGMP proxy
query solicitation on network ports, i.e. an IGMP Group Leave
with group address 0.0.0.0. This will indicate to the … | column | Enumeration | .1.3.6.1.4.1.10876.101.1.105.2.2.1.14 |
| fsSnoopFilterStatus This object is used to enable/disable the IGS filtering feature.
Interface mapping configurations will not be affected by this object
status.
When this object is disabled, filte… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.105.2.2.1.15 |
| fsSnoopMulticastVlanStatus This object is used to enable/disable the Multicast VLAN feature.
When Multicast VLAN feature is enabled, each incoming untagged report
or leave message will be classified to an… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.105.2.2.1.16 |
| fsSnoopProxyStatus This object enables or disables Proxy in the system.
Proxy can be enabled only if Proxy-reporting is disabled.
In proxy mode, the switch act as querier for all
downstream i… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.105.2.2.1.17 |
| fsSnoopQueryFwdOnAllPorts In proxy and proxy reporting mode, Snooping module will send
query messages only to the non-router ports by default.
This object provides administrative control to forward the
qu… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.105.2.2.1.18 |
| fsSnoopFwdGroupsCnt Provide Forwarding DataBase Group Count for Particular instance and
Address Type. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.105.2.2.1.19 |
| fsSnoopInetAddressType Inet Address Type corresponding to the global configuration entry.
This indicates whether the row is for IGMP/MLD Snooping | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.10876.101.1.105.2.2.1.2 |
| fsSnoopStatus Enables or disables IGMP/MLD snooping in the system.
When set to 'enabled', the IGS/MLDS module starts
protocol operations.
When set to 'disabled', the IGS/MLDS module stops perf… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.105.2.2.1.3 |
| fsSnoopProxyReportingStatus Enables or disables proxy-reporting in the system.
When proxy-reporting is 'enabled' the switch generates
reports and forwards them to the router based on the
available host inf… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.105.2.2.1.4 |
| fsSnoopRouterPortPurgeInterval deprecated This is the interval (in seconds) after which a learnt
router port entry will be purged. For each router port learnt,
this timer runs for 'RouterPortPurgeInterval' seconds.When… | column | Integer32 | .1.3.6.1.4.1.10876.101.1.105.2.2.1.5 |
| fsSnoopPortPurgeInterval deprecated This is the interval (in seconds) after which a learnt
port entry will be purged. For each port on which report
has been received, this timer runs for 'PortPurgeInterval'
second… | column | Integer32 | .1.3.6.1.4.1.10876.101.1.105.2.2.1.6 |
| fsSnoopReportForwardInterval This timer is used when both proxy and proxy-reporting is
disabled. The switch then has to suppress multiple
IGMPv2/ MLDv1 report messages for the same group from being
forward… | column | Integer32 | .1.3.6.1.4.1.10876.101.1.105.2.2.1.7 |
| fsSnoopRetryCount In proxy/proxy-reporting mode, when the switch receives leave
message on a port, it sends group specific query to check if
there are any other interested v2 receivers for the gr… | column | Integer32 | .1.3.6.1.4.1.10876.101.1.105.2.2.1.8 |
| fsSnoopGrpQueryInterval The value of this attribute defines the time period with which
the switch will send group specific queries on a port to check
if there are any intersted receivers. The switch wi… | column | Integer32 | .1.3.6.1.4.1.10876.101.1.105.2.2.1.9 |