fsSnoopGrpQueryInterval

SUPERMICRO-SNOOP-MIB · .1.3.6.1.4.1.10876.101.1.105.2.2.1.9

Object

column r/w Integer32

The value of this attribute defines the time period with which 
the switch will send group specific queries on a port to check 
if there are any intersted receivers. The switch will send 
'fsSnoopRetryCount' queries before removing the port from the 
group membership information in the forwarding database.

Context

MIB: SUPERMICRO-SNOOP-MIB
OID: .1.3.6.1.4.1.10876.101.1.105.2.2.1.9
Type: column
Access: readwrite
Status: current
Parent: fsSnoopInstanceConfigEntry
Table: fsSnoopInstanceConfigTable
Siblings: 18

Syntax

Integer32

Values & Constraints

Object Constraints

range: 2-5

Related Objects

Sibling Objects

Object	Type	Syntax	OID
fsSnoopInstanceConfigInstId Instance ID pertaining to the global configuration entry.	column	Integer32	`.1.3.6.1.4.1.10876.101.1.105.2.2.1.1`
fsSnoopReportFwdOnAllPorts In snooping mode, Snooping module will forward reports only on router ports by default. This object provides administrative control either to forward the reports on all the membe…	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.105.2.2.1.10`
fsSnoopTraceOption This object is used to enable trace statements in snooping module. A four byte integer is used for enabling the trace level. Each bit in the four byte integer represents a pa…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.10876.101.1.105.2.2.1.11`
fsSnoopOperStatus The operational status of the IGS/MLDS protocol. The value enabled(1) indicates the IGS/MLDS module is currently enabled in the system. The value disable(1) indicates the IGS/MLDS…	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.105.2.2.1.12`
fsSnoopSendQueryOnTopoChange The Snooping Switch can be configured to send IGMP/MLD General queries on all non router ports when spanning tree topology change occurs in a network. If the spanning tree mode i…	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.105.2.2.1.13`
fsSnoopSendLeaveOnTopoChange The Snooping Switch can be configured to issue an IGMP proxy query solicitation on network ports, i.e. an IGMP Group Leave with group address 0.0.0.0. This will indicate to the …	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.105.2.2.1.14`
fsSnoopFilterStatus This object is used to enable/disable the IGS filtering feature. Interface mapping configurations will not be affected by this object status. When this object is disabled, filte…	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.105.2.2.1.15`
fsSnoopMulticastVlanStatus This object is used to enable/disable the Multicast VLAN feature. When Multicast VLAN feature is enabled, each incoming untagged report or leave message will be classified to an…	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.105.2.2.1.16`
fsSnoopProxyStatus This object enables or disables Proxy in the system. Proxy can be enabled only if Proxy-reporting is disabled. In proxy mode, the switch act as querier for all downstream i…	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.105.2.2.1.17`
fsSnoopQueryFwdOnAllPorts In proxy and proxy reporting mode, Snooping module will send query messages only to the non-router ports by default. This object provides administrative control to forward the qu…	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.105.2.2.1.18`
fsSnoopFwdGroupsCnt Provide Forwarding DataBase Group Count for Particular instance and Address Type.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.10876.101.1.105.2.2.1.19`
fsSnoopInetAddressType Inet Address Type corresponding to the global configuration entry. This indicates whether the row is for IGMP/MLD Snooping	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.10876.101.1.105.2.2.1.2`
fsSnoopStatus Enables or disables IGMP/MLD snooping in the system. When set to 'enabled', the IGS/MLDS module starts protocol operations. When set to 'disabled', the IGS/MLDS module stops perf…	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.105.2.2.1.3`
fsSnoopProxyReportingStatus Enables or disables proxy-reporting in the system. When proxy-reporting is 'enabled' the switch generates reports and forwards them to the router based on the available host inf…	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.105.2.2.1.4`
fsSnoopRouterPortPurgeInterval deprecated This is the interval (in seconds) after which a learnt router port entry will be purged. For each router port learnt, this timer runs for 'RouterPortPurgeInterval' seconds.When…	column	Integer32	`.1.3.6.1.4.1.10876.101.1.105.2.2.1.5`
fsSnoopPortPurgeInterval deprecated This is the interval (in seconds) after which a learnt port entry will be purged. For each port on which report has been received, this timer runs for 'PortPurgeInterval' second…	column	Integer32	`.1.3.6.1.4.1.10876.101.1.105.2.2.1.6`
fsSnoopReportForwardInterval This timer is used when both proxy and proxy-reporting is disabled. The switch then has to suppress multiple IGMPv2/ MLDv1 report messages for the same group from being forward…	column	Integer32	`.1.3.6.1.4.1.10876.101.1.105.2.2.1.7`
fsSnoopRetryCount In proxy/proxy-reporting mode, when the switch receives leave message on a port, it sends group specific query to check if there are any other interested v2 receivers for the gr…	column	Integer32	`.1.3.6.1.4.1.10876.101.1.105.2.2.1.8`