fsMplsRsvpTeNbrGrRecoveryPathCapability

SUPERMICRO-MPLS-RSVP-TE-MIB · .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.15
MIB view Table view

Object

column Bits 
This object indicates whether the neighbor supports
RecoveryPath message capability.
R  bit indicates that the node desire to receive the
RecoveryPath message. T bit indicates that the node desire to
send the RecoveryPath message. S bit indicates that the node
desire to send and receive SRefresh RecoveryPath message.

Context

MIB
SUPERMICRO-MPLS-RSVP-TE-MIB
OID
.1.3.6.1.4.1.10876.101.1.13.2.1.3.1.15
Type
column
Access
readonly
Status
current
Parent
fsMplsRsvpTeNbrEntry
Table
fsMplsRsvpTeNbrTable
Siblings
18

Syntax

Bits

Values & Constraints

Enumerated Values
0recoveryPathTransmit
1recoveryPathReceive
2recoveryPathSRefresh

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsMplsRsvpTeNbrIfAddr
This value specifies the Ip address of the neighbour. This can be router id of the neighbour or address of the interface to which this node is connected.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.10876.101.1.13.2.1.3.1.1
fsMplsRsvpTeNbrDestInstInfo
This value specifies the destination instance value of the hello being exchanged between the neighbours. Is valid only when fsMplsRsvpTeNbrHelloSupport is enabled.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.1.13.2.1.3.1.10
fsMplsRsvpTeNbrCreationTime
This value specifies the time when the neighbour was created.
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.10876.101.1.13.2.1.3.1.11
fsMplsRsvpTeNbrLclRprDetectionTime
This value specifies the time when a local repair was detected using Hello Message exchange mechanism
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.10876.101.1.13.2.1.3.1.12
fsMplsRsvpTeNbrNumTunnels
This value specifies the number of tunnels that pass via this neighbour.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.10876.101.1.13.2.1.3.1.13
fsMplsRsvpTeNbrStatus
This value specifies the Status of the Row. Is used to create, modify and/or delete a row in this table.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.10876.101.1.13.2.1.3.1.14
fsMplsRsvpTeNbrGrRestartTime
This value specifies the he restart time interval for the Graceful restart of the neighbor node in seconds
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.1.13.2.1.3.1.16
fsMplsRsvpTeNbrGrRecoveryTime
This value specifies the recovery time interval for the Graceful resatart of the neighbor node, after restart in seconds.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.1.13.2.1.3.1.17
fsMplsRsvpTeNbrGrProgressStatus
This object denotes the current State of the neighbor's GR Progress. Following are the different State of neighbor's GR Progress. 1. Not started. 2. Restart in progress. 3. Aborte…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.1.13.2.1.3.1.18
fsMplsRsvpTeNbrStorageType
The storage type for this conceptual row in the fsMplsRsvpTeNbrTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar object in the row. …
columnSNMPv2-TCStorageType.1.3.6.1.4.1.10876.101.1.13.2.1.3.1.19
fsMplsRsvpTeNbrRRCapable
This value specifies the RR behaviour of the node towards it's neighbour. Can be enabled only when fsMplsRsvpTeRRCapable is enabled. When enabled it means bundling can take place …
columnEnumeration.1.3.6.1.4.1.10876.101.1.13.2.1.3.1.2
fsMplsRsvpTeNbrRRState
This value specifies the actual RR behaviour that is currently being applied to the neighbour. Can be enabled only when fsMplsRsvpTeNbrRRCapable is enabled. Value enabled implies …
columnEnumeration.1.3.6.1.4.1.10876.101.1.13.2.1.3.1.3
fsMplsRsvpTeNbrRMDCapable
This value specifies whether Reliable Message Delivery is to be performed for messages going to the neighbour. Can be enabled only when fsMplsRsvpTeMsgIdCapable is enabled. When e…
columnEnumeration.1.3.6.1.4.1.10876.101.1.13.2.1.3.1.4
fsMplsRsvpTeNbrEncapsType
This value specifies the Type of Encapsulation Supported by the neighbour.
columnEnumeration.1.3.6.1.4.1.10876.101.1.13.2.1.3.1.5
fsMplsRsvpTeNbrHelloSupport
This value specifies whether Hello mechanism is supported for this neighbour or not. Can be enabled only when fsMplsRsvpTeHelloSupprtd is true.
columnEnumeration.1.3.6.1.4.1.10876.101.1.13.2.1.3.1.6
fsMplsRsvpTeNbrHelloState
This value specifies the Hello State for the neighbour. Is valid only when fsMplsRsvpTeNbrHelloSupport is enabled.
columnEnumeration.1.3.6.1.4.1.10876.101.1.13.2.1.3.1.7
fsMplsRsvpTeNbrHelloRelation
This value specifies the Hello relation between the two neighbours. Active implies that this node will send hello messages. Passive implies that this node will wait for hello mess…
columnEnumeration.1.3.6.1.4.1.10876.101.1.13.2.1.3.1.8
fsMplsRsvpTeNbrSrcInstInfo
This value specifies the source instance value of the hello being exchanged between the neighbours. Is valid only when fsMplsRsvpTeNbrHelloSupport is enabled.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.1.13.2.1.3.1.9