fsMplsRsvpTeNbrEncapsType
SUPERMICRO-MPLS-RSVP-TE-MIB ·
.1.3.6.1.4.1.10876.101.1.13.2.1.3.1.5
Object
column
r/w
Enumeration
This value specifies the Type of Encapsulation Supported by the neighbour.
Context
- MIB
- SUPERMICRO-MPLS-RSVP-TE-MIB
- OID
.1.3.6.1.4.1.10876.101.1.13.2.1.3.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsMplsRsvpTeNbrEntry
- Table
- fsMplsRsvpTeNbrTable
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | ipencap |
2 | udpencap |
3 | both |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMplsRsvpTeNbrIfAddr This value specifies the Ip address of the neighbour.
This can be router id of the neighbour or address of the
interface to which this node is connected. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.1 |
| fsMplsRsvpTeNbrDestInstInfo This value specifies the destination instance value of the
hello being exchanged between the neighbours.
Is valid only when fsMplsRsvpTeNbrHelloSupport is enabled. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.10 |
| fsMplsRsvpTeNbrCreationTime This value specifies the time when the neighbour was created. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.11 |
| fsMplsRsvpTeNbrLclRprDetectionTime This value specifies the time when a local repair was detected
using Hello Message exchange mechanism | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.12 |
| fsMplsRsvpTeNbrNumTunnels This value specifies the number of tunnels that pass via this
neighbour. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.13 |
| fsMplsRsvpTeNbrStatus This value specifies the Status of the Row. Is used to create,
modify and/or delete a row in this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.14 |
| fsMplsRsvpTeNbrGrRecoveryPathCapability This object indicates whether the neighbor supports
RecoveryPath message capability.
R bit indicates that the node desire to receive the
RecoveryPath message. T bit indicates tha… | column | Bits | .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.15 |
| fsMplsRsvpTeNbrGrRestartTime This value specifies the he restart time interval for the Graceful
restart of the neighbor node in seconds | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.16 |
| fsMplsRsvpTeNbrGrRecoveryTime This value specifies the recovery time interval for the Graceful
resatart of the neighbor node, after restart in seconds. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.17 |
| fsMplsRsvpTeNbrGrProgressStatus This object denotes the current State of the neighbor's GR Progress.
Following are the different State of neighbor's GR Progress.
1. Not started.
2. Restart in progress.
3. Aborte… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.18 |
| fsMplsRsvpTeNbrStorageType The storage type for this conceptual row in the fsMplsRsvpTeNbrTable.
Conceptual rows having the value 'permanent' need not allow
write-access to any columnar object in the row.
… | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.19 |
| fsMplsRsvpTeNbrRRCapable This value specifies the RR behaviour of the node towards it's
neighbour.
Can be enabled only when fsMplsRsvpTeRRCapable is enabled. When
enabled it means bundling can take place … | column | Enumeration | .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.2 |
| fsMplsRsvpTeNbrRRState This value specifies the actual RR behaviour that is currently
being applied to the neighbour.
Can be enabled only when fsMplsRsvpTeNbrRRCapable is enabled.
Value enabled implies … | column | Enumeration | .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.3 |
| fsMplsRsvpTeNbrRMDCapable This value specifies whether Reliable Message Delivery is to
be performed for messages going to the neighbour.
Can be enabled only when fsMplsRsvpTeMsgIdCapable is enabled.
When e… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.4 |
| fsMplsRsvpTeNbrHelloSupport This value specifies whether Hello mechanism is supported for
this neighbour or not.
Can be enabled only when fsMplsRsvpTeHelloSupprtd is true. | column | Enumeration | .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.6 |
| fsMplsRsvpTeNbrHelloState This value specifies the Hello State for the neighbour.
Is valid only when fsMplsRsvpTeNbrHelloSupport is enabled. | column | Enumeration | .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.7 |
| fsMplsRsvpTeNbrHelloRelation This value specifies the Hello relation between the two
neighbours.
Active implies that this node will send hello messages.
Passive implies that this node will wait for hello mess… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.8 |
| fsMplsRsvpTeNbrSrcInstInfo This value specifies the source instance value of the hello
being exchanged between the neighbours.
Is valid only when fsMplsRsvpTeNbrHelloSupport is enabled. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.9 |