fsMplsTnlModel
SUPERMICRO-MPLS-MIB ·
.1.3.6.1.4.1.10876.101.1.13.1.7.6
Object
scalar
r/w
Enumeration
Type of Tunneling Model supported on the LSR.
With the Pipe Model, MPLS tunnels (aka LSPs) are used to hide the
intermediate MPLS nodes between LSP Ingress and Egress from the
Diff-Serv perspective.
With the Short Pipe Model, the Diff-Serv forwarding treatment at the
LSP Egress is applied based on the 'Tunneled Diff-Serv Information'
(i.e., Diff-Serv information conveyed in the encapsulated header)
rather than on the 'LSP Diff-Serv information' (i.e., Diff-Serv
information conveyed in the encapsulating header).
With the Uniform Model, MPLS tunnels (aka LSPs) are viewed as
artifacts of the end-to-end path from the Diff-Serv standpoint.
In this model, any packet contains exactly one piece of Diff-Serv
information which is meaningful and is always encoded in the outer
most label entry (or in the IP DSCP where the IP packet is
transmitted unlabelled for instance at the egress of the LSP).
Context
- MIB
- SUPERMICRO-MPLS-MIB
- OID
.1.3.6.1.4.1.10876.101.1.13.1.7.6- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- fsMplsDiffServObjects
- Siblings
- 7
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | uniform |
2 | pipe |
3 | shortpipe |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMplsDiffServElspMapTable ELSP's EXP to PHB Mapping Table | table | - | .1.3.6.1.4.1.10876.101.1.13.1.7.1 |
| fsMplsDiffServParamsTable Table containing the DiffServ Params for a given NHLFE | table | - | .1.3.6.1.4.1.10876.101.1.13.1.7.2 |
| fsMplsDiffServTable The fsMplsDiffServTable allows a manager to
specify the diffServ Service-Type and the corresponding
attributes for the Service-Type as desired for the tunnel
when the mpls is di… | table | - | .1.3.6.1.4.1.10876.101.1.13.1.7.3 |
| fsMplsDiffServElspInfoTable The fsMplsDiffServElspInfoTable allows a manager to
specify the information about the PHBs and the resource
requirement for the PSC of the PHB for the diffServ Elsp
Tunnel. | table | - | .1.3.6.1.4.1.10876.101.1.13.1.7.4 |
| fsMplsDiffServElspInfoListIndexNext This object contains the next appropriate value to
be used for fsMplsDiffServElspInfoListIndex when creating entries
in fsMplsDiffServElspInfoTable. If the number of unassigned
e… | scalar | Integer32 | .1.3.6.1.4.1.10876.101.1.13.1.7.5 |
| fsMplsRsrcMgmtType This read-write object is used for configuring resource
management type for diffserv,depending on the type reservation is
done | scalar | Enumeration | .1.3.6.1.4.1.10876.101.1.13.1.7.7 |
| fsMplsTTLVal Value of the TTL on the LSR.
In Pipe Model, the configured TTL value shall be copied to the newly
formed MPLS header at the ingress LSR of the MPLS tunnels.This
TTL va… | scalar | Integer32 | .1.3.6.1.4.1.10876.101.1.13.1.7.8 |