fsMplsL2VpnTrcFlag

SUPERMICRO-MPLS-MIB · .1.3.6.1.4.1.10876.101.1.13.1.5.1.1
MIB view Table view

Object

scalar r/w SNMPv2-SMIInteger32 
This is a 4-byte (32-bit) object with each bit enabling/disabling a 
particular type of trace/debug statement. Following is the convention
followed.
          
|<------------ 32 bits ------------>|
+--------+--------+--------+--------+
|00000000|00000000|00000000|00000000|
+--------+--------+--------+--------+
  CPT      VCCV     Func     Levels
            GR
          
00000000  00000000  00000000  00000001 - Level One Critical Trace
00000000  00000000  00000000  00000011 - Level Two Error Trace that includes
                                         level One
00000000  00000000  00000000  00000111 - Level Three Debug Trace that includes
                                         level One and level Two
          
          
00000000  00000000  00000001  00000000 - Signalling Functional Traces
00000000  00000000  00000010  00000000 - Session Functional Traces
00000000  00000000  00000100  00000000 - VC Functional Traces
00000000  00000000  00001000  00000000 - Critical Functional Traces
          
          
01000000  00000000  00000000  00000000 - Debug Messages for Packet Rx
00100000  00000000  00000000  00000000 - Debug Messages for Packet Tx
01100000  00000000  00000000  00000000 - Debug Messages for Packet Tx and Rx
          
00000000  00000001  00000000  00000000 - VCCV critical debug statements
00000000  00000010  00000000  00000000 - VCCV management configuration
00000000  00000100  00000000  00000000 - VCCV capability exchange and selection
00000000  00001000  00000000  00000000 - Graceful Restart related debug Statements

Context

MIB
SUPERMICRO-MPLS-MIB
OID
.1.3.6.1.4.1.10876.101.1.13.1.5.1.1
Type
scalar
Access
readwrite
Status
current
Parent
fsMplsL2VpnConfigObjects
Siblings
10

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsMplsHwCCTypeCapabilities
This object indicates the Control channel capability supported by hardware. The value of this object is obtained from the NP layer.
scalarPwCcTypesCapabilities.1.3.6.1.4.1.10876.101.1.13.1.5.1.10
fsMplsPortTable
This table is used for the Port related configuration on MPLS. All the objects in this table are applicable for UNI ports only.
table-.1.3.6.1.4.1.10876.101.1.13.1.5.1.11
fsMplsL2VpnCleanupInterval
The Cleanup time interval value will be in terms of thousandths of a second. This determines how long the peer label information can be kept waiting for local configuration.The PW…
scalarSNMPv2-TCTimeInterval.1.3.6.1.4.1.10876.101.1.13.1.5.1.2
fsMplsL2VpnAdminStatus
Field indicates the status of the L2VPN functionality. When the value is set to UP, required resource will be allocated and L2VPN functionality will be started. When made down fro…
scalarEnumeration.1.3.6.1.4.1.10876.101.1.13.1.5.1.3
fsMplsL2VpnPwTable
This table is an extension to pw Table for configuring the mode of Pseudowire
table-.1.3.6.1.4.1.10876.101.1.13.1.5.1.4
fsMplsVplsConfigTable
This table specifies information for configuring and monitoring Virtual Private Lan Services(VPLS).
table-.1.3.6.1.4.1.10876.101.1.13.1.5.1.5
fsPwMplsInboundTable
This table reports and configure the current inbound MPLS tunnels (i.e. Egress Tunnels). This table is to be used only in case of pwMplsType TE. It also reports the current in…
table-.1.3.6.1.4.1.10876.101.1.13.1.5.1.6
fsMplsLocalCCTypesCapabilities
This object denotes the configured control channel type capabilities that are used to demultiplex the incoming VCCV control packets. Configuration of this object is o…
scalarPwCcTypesCapabilities.1.3.6.1.4.1.10876.101.1.13.1.5.1.7
fsMplsLocalCVTypesCapabilities
This object denotes the configured connectivity verification types of the local node that are used to demultiplex the incoming VCCV control packets. Configuration of …
scalarPwCvTypesCapabilities.1.3.6.1.4.1.10876.101.1.13.1.5.1.8
fsMplsRouterID
This object denotes the MPLS router Identifier. This Identifier is used in identifying the router for OAM operations.
scalarOctetString.1.3.6.1.4.1.10876.101.1.13.1.5.1.9