fsMefMepRowStatus
SUPERMICRO-MEF-MIB ·
.1.3.6.1.4.1.10876.101.2.71.7.1.1.35
Object
Indicates the status of MEP row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated, possible values are row status active and row status not active.
Context
- MIB
- SUPERMICRO-MEF-MIB
- OID
.1.3.6.1.4.1.10876.101.2.71.7.1.1.35- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsMefMepEntry
- Table
- fsMefMepTable
- Siblings
- 36
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMefMegIndex Internally this object will refer to mib object dot1agCfmMdIndex of
ECFM and fsMIY1731MegIndex of Y1731. | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.71.7.1.1.1 |
| fsMefMepTransmitLmmDestMacAddress The Target MAC Address Field to be transmitted: A unicast
destination MAC address to be used for LMM. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.10876.101.2.71.7.1.1.10 |
| fsMefMepTransmitLmmDestMepId An indication of the Target MAC Address Field to be
transmitted:
The Maintenance association End Point Identifier of
another MEP in the same Maintenance Association
This address w… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.10876.101.2.71.7.1.1.11 |
| fsMefMepTransmitLmmDestIsMepId True indicates that MEPID of the target MEP is used for
LM frame transmission.
False indicates that unicast destination MAC address of the
target MEP is used for Frame Loss Measur… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.71.7.1.1.12 |
| fsMefMepTransmitLmmMessages The number of LMM messages to be transmitted. | column | Integer32 | .1.3.6.1.4.1.10876.101.2.71.7.1.1.13 |
| fsMefMepTxFCf The counter of in-profile data frames transmitted towards its
peer MEP transmitted in the last CCM or LMM. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.71.7.1.1.14 |
| fsMefMepRxFCb The counter of in-profile data frames received from its peer MEP at the
time of receiving the last CCM frame. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.71.7.1.1.15 |
| fsMefMepTxFCb The value of fsMefMepTxFCf field in the last CCM or LMR frame
received from its peer MEP. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.71.7.1.1.16 |
| fsMefMepNearEndFrameLossThreshold Threshold value for the near-end frame loss.
Notification is sent to Management Application if calculated near-end
frame loss exceeds configured threshold. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.71.7.1.1.17 |
| fsMefMepFarEndFrameLossThreshold Threshold value for the far-end frame loss.
Notification is sent to Management Application if calculated far-end
frame loss exceeds configured threshold.
This refers to Oneway Fr… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.71.7.1.1.18 |
| fsMefMepTransmitDmStatus An Enumerated value set to 'start' to initiate 1DM or DMM transmission
and 'stop' to stop 1DM or DMM transmission.
'ready' and 'notReady' indicates whether 1DM or DMM can be init… | column | SUPERMICRO-ECFM-Y1731-MI-MIBFsY1731TransmitStatus | .1.3.6.1.4.1.10876.101.2.71.7.1.1.19 |
| fsMefMeIndex Internally this object will refer to mib object
dot1agCfmMaIndex of ECFM and fsMIY1731MeIndex of Y1731 | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.71.7.1.1.2 |
| fsMefMepTransmitDmResultOK Indicates the result of the operation:
- true The Delay measurement Message (1DM or DMM) will be
(or has been) sent.
- false The Delay measurement M… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.71.7.1.1.20 |
| fsMefMepTransmitDmType Type of delay measurement to be initiated:
- oneWay(1) Measurement (by 1DM) is calculated at destination end.
- twoWay(2) Measurement (by DMM-DMR) is calculated… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.71.7.1.1.21 |
| fsMefMepTransmitDmInterval Interval between two successive DM messages
(1DM or DMM) transmissions to be used by the MEP. This refers
to the interval between frame pairs as mentioned in section 6.9.4
of MEF… | column | Integer32 | .1.3.6.1.4.1.10876.101.2.71.7.1.1.22 |
| fsMefMepTransmitDmMessages The number of DM (1DM or DMM) messages to be transmitted. | column | Integer32 | .1.3.6.1.4.1.10876.101.2.71.7.1.1.23 |
| fsMefMepTransmitDmmDropEnable Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted DMM frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.71.7.1.1.24 |
| fsMefMepTransmit1DmDropEnable Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted 1DM frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.71.7.1.1.25 |
| fsMefMepTransmitDmmPriority Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted DMM frame. | column | Integer32 | .1.3.6.1.4.1.10876.101.2.71.7.1.1.26 |
| fsMefMepTransmit1DmPriority Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted 1DM frame. | column | Integer32 | .1.3.6.1.4.1.10876.101.2.71.7.1.1.27 |
| fsMefMepTransmitDmDestMacAddress The Target MAC Address Field to be transmitted: A unicast
destination MAC address to be used for 1DM or DMM. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.10876.101.2.71.7.1.1.28 |
| fsMefMepTransmitDmDestMepId An indication of the Target MAC Address Field to be
transmitted:
The Maintenance association End Point Identifier of
another MEP in the same Maintenance Association
This address w… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.10876.101.2.71.7.1.1.29 |
| fsMefMepIdentifier Internally this object will refer to mib object
dot1agCfmMepIdentifier of ECFM and fsMIY1731MepIdentifier of Y1731 | column | IEEE8021-CFM-MIBDot1agCfmMepId | .1.3.6.1.4.1.10876.101.2.71.7.1.1.3 |
| fsMefMepTransmitDmDestIsMepId True indicates that MEPID of the target MEP is used for
Delay frame transmission.
False indicates that unicast destination MAC address of the
target MEP is used for… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.71.7.1.1.30 |
| fsMefMepTransmitDmDeadline Specify a timeout, in seconds, before Delay Measurement operation exits.
Delay Measurement operation exits, if configured number of messages are
sent before timeout. | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.71.7.1.1.31 |
| fsMefMepDmrOptionalFields Indicates whether to include optional fields in the DMR Frame or not.
True indicates optional fields are to be included and False indicates
optional fields are not included.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.71.7.1.1.32 |
| fsMefMep1DmRecvCapability The administrative status of 1DM Frame reception. This enables
or disables the capability of MEP to process the 1DM Frames.
A value of 'enabled' (1) indicates to accept and proc… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.71.7.1.1.33 |
| fsMefMepFrameDelayThreshold Threshold (in microseconds) for the Frame delay.
Notification is sent to Management application if calculated frame delay
exceeds configured threshold. This refers to Inter Frame… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.71.7.1.1.34 |
| fsMefMepRxFCf The value of fsMefMepRxFCf field is the value of in-profile data frames
received from its peer MEP. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.71.7.1.1.36 |
| fsMefMep1DmTransInterval Time interval (in 0.01 seconds) between two successive One-way
DM Transactions and is used to carry out Delay Variation Measurement for
1DM transactions. The value '0' indicates O… | column | Integer32 | .1.3.6.1.4.1.10876.101.2.71.7.1.1.37 |
| fsMefMepTransmitLmmStatus An Enumerated value set to 'start' to initiate LM transmission
and 'stop' to stop LM transmission.
'ready' and 'notReady' indicates whether LM can be initiated or not.
… | column | SUPERMICRO-ECFM-Y1731-MI-MIBFsY1731TransmitStatus | .1.3.6.1.4.1.10876.101.2.71.7.1.1.4 |
| fsMefMepTransmitLmmResultOK Indicates the result of the operation:
- true The Loss measurement Message (LMM) will be (or has been) sent.
- false The Loss measurement Messag… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.71.7.1.1.5 |
| fsMefMepTransmitLmmInterval Interval between two successive LMM transmissions to be used by the MEP. | column | SUPERMICRO-ECFM-Y1731-MI-MIBFsY1731LmmInterval | .1.3.6.1.4.1.10876.101.2.71.7.1.1.6 |
| fsMefMepTransmitLmmDeadline Specify a timeout, in seconds, before loss measurement exits.
Loss Measurement exits, if configured number of messages are sent
before timeout. | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.71.7.1.1.7 |
| fsMefMepTransmitLmmDropEnable Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted LMM frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.71.7.1.1.8 |
| fsMefMepTransmitLmmPriority Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted LMM frame. | column | Integer32 | .1.3.6.1.4.1.10876.101.2.71.7.1.1.9 |