fsMefMep1DmTransInterval

SUPERMICRO-MEF-MIB · .1.3.6.1.4.1.10876.101.2.71.7.1.1.37
MIB view Table view

Object

column r/w Integer32 
Time interval (in 0.01 seconds) between two successive One-way
DM Transactions and is used to carry out Delay Variation Measurement for
1DM transactions. The value '0' indicates One-way Delay Variation
measurement cannot take place. The value should be greater than the
DM Interval.

Context

MIB
SUPERMICRO-MEF-MIB
OID
.1.3.6.1.4.1.10876.101.2.71.7.1.1.37
Type
column
Access
readwrite
Status
current
Parent
fsMefMepEntry
Table
fsMefMepTable
Siblings
36

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-1500

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsMefMegIndex
Internally this object will refer to mib object dot1agCfmMdIndex of ECFM and fsMIY1731MegIndex of Y1731.
columnUnsigned32.1.3.6.1.4.1.10876.101.2.71.7.1.1.1
fsMefMepTransmitLmmDestMacAddress
The Target MAC Address Field to be transmitted: A unicast destination MAC address to be used for LMM.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.10876.101.2.71.7.1.1.10
fsMefMepTransmitLmmDestMepId
An indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Association This address w…
columnIEEE8021-CFM-MIBDot1agCfmMepIdOrZero.1.3.6.1.4.1.10876.101.2.71.7.1.1.11
fsMefMepTransmitLmmDestIsMepId
True indicates that MEPID of the target MEP is used for LM frame transmission. False indicates that unicast destination MAC address of the target MEP is used for Frame Loss Measur…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.2.71.7.1.1.12
fsMefMepTransmitLmmMessages
The number of LMM messages to be transmitted.
columnInteger32.1.3.6.1.4.1.10876.101.2.71.7.1.1.13
fsMefMepTxFCf
The counter of in-profile data frames transmitted towards its peer MEP transmitted in the last CCM or LMM.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.2.71.7.1.1.14
fsMefMepRxFCb
The counter of in-profile data frames received from its peer MEP at the time of receiving the last CCM frame.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.2.71.7.1.1.15
fsMefMepTxFCb
The value of fsMefMepTxFCf field in the last CCM or LMR frame received from its peer MEP.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.2.71.7.1.1.16
fsMefMepNearEndFrameLossThreshold
Threshold value for the near-end frame loss. Notification is sent to Management Application if calculated near-end frame loss exceeds configured threshold.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.2.71.7.1.1.17
fsMefMepFarEndFrameLossThreshold
Threshold value for the far-end frame loss. Notification is sent to Management Application if calculated far-end frame loss exceeds configured threshold. This refers to Oneway Fr…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.2.71.7.1.1.18
fsMefMepTransmitDmStatus
An Enumerated value set to 'start' to initiate 1DM or DMM transmission and 'stop' to stop 1DM or DMM transmission. 'ready' and 'notReady' indicates whether 1DM or DMM can be init…
columnSUPERMICRO-ECFM-Y1731-MI-MIBFsY1731TransmitStatus.1.3.6.1.4.1.10876.101.2.71.7.1.1.19
fsMefMeIndex
Internally this object will refer to mib object dot1agCfmMaIndex of ECFM and fsMIY1731MeIndex of Y1731
columnUnsigned32.1.3.6.1.4.1.10876.101.2.71.7.1.1.2
fsMefMepTransmitDmResultOK
Indicates the result of the operation: - true The Delay measurement Message (1DM or DMM) will be (or has been) sent. - false The Delay measurement M…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.2.71.7.1.1.20
fsMefMepTransmitDmType
Type of delay measurement to be initiated: - oneWay(1) Measurement (by 1DM) is calculated at destination end. - twoWay(2) Measurement (by DMM-DMR) is calculated…
columnEnumeration.1.3.6.1.4.1.10876.101.2.71.7.1.1.21
fsMefMepTransmitDmInterval
Interval between two successive DM messages (1DM or DMM) transmissions to be used by the MEP. This refers to the interval between frame pairs as mentioned in section 6.9.4 of MEF…
columnInteger32.1.3.6.1.4.1.10876.101.2.71.7.1.1.22
fsMefMepTransmitDmMessages
The number of DM (1DM or DMM) messages to be transmitted.
columnInteger32.1.3.6.1.4.1.10876.101.2.71.7.1.1.23
fsMefMepTransmitDmmDropEnable
Drop Enable bit value to be used in the VLAN tag, if present in the transmitted DMM frame.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.2.71.7.1.1.24
fsMefMepTransmit1DmDropEnable
Drop Enable bit value to be used in the VLAN tag, if present in the transmitted 1DM frame.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.2.71.7.1.1.25
fsMefMepTransmitDmmPriority
Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted DMM frame.
columnInteger32.1.3.6.1.4.1.10876.101.2.71.7.1.1.26
fsMefMepTransmit1DmPriority
Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted 1DM frame.
columnInteger32.1.3.6.1.4.1.10876.101.2.71.7.1.1.27
fsMefMepTransmitDmDestMacAddress
The Target MAC Address Field to be transmitted: A unicast destination MAC address to be used for 1DM or DMM.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.10876.101.2.71.7.1.1.28
fsMefMepTransmitDmDestMepId
An indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Association This address w…
columnIEEE8021-CFM-MIBDot1agCfmMepIdOrZero.1.3.6.1.4.1.10876.101.2.71.7.1.1.29
fsMefMepIdentifier
Internally this object will refer to mib object dot1agCfmMepIdentifier of ECFM and fsMIY1731MepIdentifier of Y1731
columnIEEE8021-CFM-MIBDot1agCfmMepId.1.3.6.1.4.1.10876.101.2.71.7.1.1.3
fsMefMepTransmitDmDestIsMepId
True indicates that MEPID of the target MEP is used for Delay frame transmission. False indicates that unicast destination MAC address of the target MEP is used for…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.2.71.7.1.1.30
fsMefMepTransmitDmDeadline
Specify a timeout, in seconds, before Delay Measurement operation exits. Delay Measurement operation exits, if configured number of messages are sent before timeout.
columnUnsigned32.1.3.6.1.4.1.10876.101.2.71.7.1.1.31
fsMefMepDmrOptionalFields
Indicates whether to include optional fields in the DMR Frame or not. True indicates optional fields are to be included and False indicates optional fields are not included. …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.2.71.7.1.1.32
fsMefMep1DmRecvCapability
The administrative status of 1DM Frame reception. This enables or disables the capability of MEP to process the 1DM Frames. A value of 'enabled' (1) indicates to accept and proc…
columnEnumeration.1.3.6.1.4.1.10876.101.2.71.7.1.1.33
fsMefMepFrameDelayThreshold
Threshold (in microseconds) for the Frame delay. Notification is sent to Management application if calculated frame delay exceeds configured threshold. This refers to Inter Frame…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.2.71.7.1.1.34
fsMefMepRowStatus
Indicates the status of MEP row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated, possible…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.10876.101.2.71.7.1.1.35
fsMefMepRxFCf
The value of fsMefMepRxFCf field is the value of in-profile data frames received from its peer MEP.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.2.71.7.1.1.36
fsMefMepTransmitLmmStatus
An Enumerated value set to 'start' to initiate LM transmission and 'stop' to stop LM transmission. 'ready' and 'notReady' indicates whether LM can be initiated or not. …
columnSUPERMICRO-ECFM-Y1731-MI-MIBFsY1731TransmitStatus.1.3.6.1.4.1.10876.101.2.71.7.1.1.4
fsMefMepTransmitLmmResultOK
Indicates the result of the operation: - true The Loss measurement Message (LMM) will be (or has been) sent. - false The Loss measurement Messag…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.2.71.7.1.1.5
fsMefMepTransmitLmmInterval
Interval between two successive LMM transmissions to be used by the MEP.
columnSUPERMICRO-ECFM-Y1731-MI-MIBFsY1731LmmInterval.1.3.6.1.4.1.10876.101.2.71.7.1.1.6
fsMefMepTransmitLmmDeadline
Specify a timeout, in seconds, before loss measurement exits. Loss Measurement exits, if configured number of messages are sent before timeout.
columnUnsigned32.1.3.6.1.4.1.10876.101.2.71.7.1.1.7
fsMefMepTransmitLmmDropEnable
Drop Enable bit value to be used in the VLAN tag, if present in the transmitted LMM frame.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.2.71.7.1.1.8
fsMefMepTransmitLmmPriority
Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted LMM frame.
columnInteger32.1.3.6.1.4.1.10876.101.2.71.7.1.1.9