fsLaTraceOption
SUPERMICRO-LA-MIB ·
.1.3.6.1.4.1.10876.101.1.63.1.3
Object
This object is used to enable Trace Statements in
Link Aggregation Module.
A FOUR BYTE integer is used for enabling the level of tracing.
Each BIT in the four byte integer, represents a particular
level of Trace.
The mapping between the bit positions & the level of trace is
as follows:
0 - Init and Shutdown Traces
1 - Management Traces
2 - Data Path Traces
3 - Control Plane Traces
4 - Packet Dump Traces
5 - Traces related to All Resources except Buffers
6 - All Failure Traces
7 - Buffer Traces
The remaining bits are unused. Combination of levels are
also allowed.
For example if the bits 0 and 1 are set, then the Trace
statements related to Init-Shutdown and management
will be printed.
The user has to enter the corresponding INTEGER VALUE for the
bits set. For example if bits 0 and 1 are set then user has to
set the value 3.
Context
- MIB
- SUPERMICRO-LA-MIB
- OID
.1.3.6.1.4.1.10876.101.1.63.1.3- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- fsLaSystem
- Siblings
- 10
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsLaSystemControl Start or shutdown Link Aggregation Module in the system
When set as 'start',resources required by Link aggregation
module are allocated & Link aggregation module start… | scalar | Enumeration | .1.3.6.1.4.1.10876.101.1.63.1.1 |
| fsLaMlagSystemID A 6-octet read-write MAC address value that is used by
AutoLAG to configure system address for each MLAG portal. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.10876.101.1.63.1.10 |
| fsLaMlagSystemNumber A global read-write value that is used by AutoLAG to
configure system number for each MLAG portal. | scalar | Integer32 | .1.3.6.1.4.1.10876.101.1.63.1.11 |
| fsLaStatus Sets the Link Aggregation Module administrative status as
enabled or disabled. The module can be enabled only when this
object is set to 'enabled'. | scalar | Enumeration | .1.3.6.1.4.1.10876.101.1.63.1.2 |
| fsLaMaxPortsPerPortChannel This Object specifies the maximun number of
ports that can attach to a port-channel | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.63.1.4 |
| fsLaMaxPortChannels This Object specifies the maximum number of
Port-channels Present in the system | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.63.1.5 |
| fsLaOperStatus This read only objects gives actual status of the Link
Aggregation Module (Operational status of module). When
Module is enabled Link Aggregation protocol starts
functioning. Wh… | scalar | Enumeration | .1.3.6.1.4.1.10876.101.1.63.1.6 |
| fsLaActorSystemID A 6-octet read-write MAC address value used as a unique
identifier for the System. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.10876.101.1.63.1.7 |
| fsLaNoPartnerIndep When enabled, and if there is no remote partner information
available in the system then the port-channel becomes
operationally down and the member ports of the port-channel
oper… | scalar | Enumeration | .1.3.6.1.4.1.10876.101.1.63.1.8 |
| fsLaAutoLAG Enable or Disable Auto-LAG on a switch globally. | scalar | Enumeration | .1.3.6.1.4.1.10876.101.1.63.1.9 |