issUDFilterOutPortList
SUPERMICRO-ISS-MIB ·
.1.3.6.1.4.1.10876.101.1.81.18.1.1.16
Object
column
r/w
PortList
Specifies the complete set of ports over which if the packet goes out,
this filter rule will be applicable.
If the outgoing port list is '0',the filter rule is applicable for all the
outgoing packets in all ports.
There are some H/W limitations for:
1. Allow only single port now.
2. Out port is not applicable for DLF packet.
By default outport list is maintained as '0'.
Context
- MIB
- SUPERMICRO-ISS-MIB
- OID
.1.3.6.1.4.1.10876.101.1.81.18.1.1.16- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- issUDFilterEntry
- Table
- issUDFilterTable
- Siblings
- 17
Syntax
PortList
- Source
- PortList
- Base type
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| issUDFilterNo User-Defined Filter rule number.
This object is deprecated and the corresponding functionality is
met with issUDFilter objects in fsissext.mib. | column | Integer32 | .1.3.6.1.4.1.10876.101.1.81.18.1.1.1 |
| issUDFilterSrcIpAddrMask The IP subnet mask for Source IP address.
This object is valid only if the 'issUDFilterPktType' is 'IP', 'UDP' or 'TCP'. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.10876.101.1.81.18.1.1.10 |
| issUDFilterMinDstProtPort The minimum port in the destination port range. Please note
these ports are the TCP / UDP ports.
This object is valid only if the 'issUDFilterPktType' is 'UDP' or 'TCP'. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.1.81.18.1.1.11 |
| issUDFilterMaxDstProtPort The maximum port in the destination port range. Please note
these ports are the TCP / UDP ports.
This object is valid only if the 'issUDFilterPktType' is 'UDP' or 'TCP'. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.1.81.18.1.1.12 |
| issUDFilterMinSrcProtPort The minimum port in the source port range. Please note
these ports are the TCP / UDP ports.
This object is valid only if the 'issUDFilterPktType' is 'UDP' or 'TCP'. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.1.81.18.1.1.13 |
| issUDFilterMaxSrcProtPort The maximum port in the source port range. Please note
these ports are the TCP / UDP ports.
This object is valid only if the 'issUDFilterPktType' is 'UDP' or 'TCP'. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.1.81.18.1.1.14 |
| issUDFilterInPortList Specifies the complete set of ports over which if the packet arrives
this filter rule will be applicable.
If the incoming port list is '0', the filter rule is applicable for all t… | column | PortList | .1.3.6.1.4.1.10876.101.1.81.18.1.1.15 |
| issUDFilterAction Specifies the action to be taken on the packet if the filter
rule matches.
If the action is 'allow', the packet will be sent to the
ports in 'out port list'. If the out port list … | column | Enumeration | .1.3.6.1.4.1.10876.101.1.81.18.1.1.17 |
| issUDFilterStatus This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of th… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.10876.101.1.81.18.1.1.18 |
| issUDFilterPriority The priority of the UDF filter can be used to decide which filter rule
is applicable when the packet matches with more than one filter rules.
Higher value of 'filt… | column | Integer32 | .1.3.6.1.4.1.10876.101.1.81.18.1.1.2 |
| issUDFilterPktType The packet header type to be filtered by User-Defined Filter. | column | Enumeration | .1.3.6.1.4.1.10876.101.1.81.18.1.1.3 |
| issUDFilterDstMacAddr Destination MAC address to be matched with the packet. By Default, the
Destination Mac Address will be zero which means dont care condition ie)
any Dst Mac Address.
This object is… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.10876.101.1.81.18.1.1.4 |
| issUDFilterSrcMacAddr Source MAC address to be matched with the packet. By Default, the Source
Mac Address will be zero which means dont care condition ie) any Src Mac
address.
This object is valid o… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.10876.101.1.81.18.1.1.5 |
| issUDFilterProtocol The type of protocol to be checked against the packet. The
default value is 255. If the value is 255, it means that the
protocol type can be anything and it will not be checked to… | column | Integer32 | .1.3.6.1.4.1.10876.101.1.81.18.1.1.6 |
| issUDFilterDstIpAddr Destination IP address to be matched with the packet.
This object is valid only if the 'issUDFilterPktType' is 'IP', 'UDP' or 'TCP'. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.10876.101.1.81.18.1.1.7 |
| issUDFilterSrcIpAddr Source IP address to be matched with the packet.
This object is valid only if the 'issUDFilterPktType' is 'IP', 'UDP' or 'TCP'. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.10876.101.1.81.18.1.1.8 |
| issUDFilterDstIpAddrMask The IP subnet mask for Destination IP address.
This object is valid only if the 'issUDFilterPktType' is 'IP', 'UDP' or 'TCP'. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.10876.101.1.81.18.1.1.9 |