fsEcfmMipTable

SUPERMICRO-ECFM-MIB · .1.3.6.1.4.1.10876.101.1.150.1.26

Object

table

The Maintenance Intermediate Point (MIP) table.
          
Each row in the table represents a different MIP. 
A MIP consists two MIP Half Functions (MHFs) on a 
single Bridge Port, an Up MHF and a Down MHF.

Context

MIB: SUPERMICRO-ECFM-MIB
OID: .1.3.6.1.4.1.10876.101.1.150.1.26
Type: table
Status: current
Parent: fsEcfmSystem
Siblings: 28
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
fsEcfmSystemControl The administrative system control status of Ethernet CFM module. The value 'start' (1) indicates that all resources required by ECFM module should be allocated and ECFM should be…	scalar	Enumeration	`.1.3.6.1.4.1.10876.101.1.150.1.1`
fsEcfmMipCcmDbStatus The administrative status of MIP CCM DB . This enables or disables caching of data learned through CCM messages	scalar	Enumeration	`.1.3.6.1.4.1.10876.101.1.150.1.10`
fsEcfmMipCcmDbClear Indicates if the contents of MIP CCM DB are to be removed. If set to true then entries in traceroute cache are removed, and it sets to false.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.10876.101.1.150.1.11`
fsEcfmMipCcmDbSize Identifies the maximum no of entries for the MIP CCM DB table, only if fsEcfmMipDbStatus is enabled	scalar	Integer32	`.1.3.6.1.4.1.10876.101.1.150.1.12`
fsEcfmMipCcmDbHoldTime Identifies the time in hours for which MIP CCM DB table entries are retained	scalar	Integer32	`.1.3.6.1.4.1.10876.101.1.150.1.13`
fsEcfmMemoryFailureCount Identifies the number of memory allocation failures	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.10876.101.1.150.1.14`
fsEcfmBufferFailureCount Identifies the number of buffer allocation failures	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.10876.101.1.150.1.15`
fsEcfmUpCount Identifies the number of times module was enabled	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.10876.101.1.150.1.16`
fsEcfmDownCount Identifies the number of times module was disabled	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.10876.101.1.150.1.17`
fsEcfmNoDftCount Identifies the number of times no defect occured in any MEP	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.10876.101.1.150.1.18`
fsEcfmRdiDftCount Identifies the number of times RDI defect occured in any MEP	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.10876.101.1.150.1.19`
fsEcfmModuleStatus The administrative module status of Ethernet CFM module. This enables or disables ECFM in the system. A value of 'enabled' (1) indicates that ECFM is enabled in the device. A va…	scalar	Enumeration	`.1.3.6.1.4.1.10876.101.1.150.1.2`
fsEcfmMacStatusDftCount Identifies the number of times MAC Status defect occured in any MEP	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.10876.101.1.150.1.20`
fsEcfmRemoteCcmDftCount Identifies the number of times Remote CCM defect occured in any MEP	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.10876.101.1.150.1.21`
fsEcfmErrorCcmDftCount Identifies the number of times Error CCM defect occured in any MEP	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.10876.101.1.150.1.22`
fsEcfmXconDftCount Identifies the number of times Xconn defect occured in any MEP filtering rules	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.10876.101.1.150.1.23`
fsEcfmCrosscheckDelay To configure the number of CCMs to be missed, for which a device waits for the remote maintenance end points(MEPs) to come up .if the user has not configured then we will use stan…	scalar	Integer32	`.1.3.6.1.4.1.10876.101.1.150.1.24`
fsEcfmMipDynamicEvaluationStatus This enables or disables the implicit evaluation and creation of MIPs. is purged.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.10876.101.1.150.1.25`
fsEcfmMipCcmDbTable It is a list of every distinct {FID, source_address, InterfaceIndex} triple from all of the CCMs presented to all of the Bridge.s MPs. Continuity Check Receivers since the Bridge…	table	-	`.1.3.6.1.4.1.10876.101.1.150.1.27`
fsEcfmGlobalCcmOffload The administrative Global CCMOffloading status. when value 'enable' (1) is set then CCMOffloading will start for all the MEPs in the system and will overwrite the per MEP offloadi…	scalar	Enumeration	`.1.3.6.1.4.1.10876.101.1.150.1.28`
fsEcfmDynMipPreventionTable The Dynamic Maintenance Intermediate Point (MIP) Prevention table. An entry in this table will restrict the automatic creation of MIPs for the corresponding index (IfIndex, MD Le…	table	-	`.1.3.6.1.4.1.10876.101.1.150.1.29`
fsEcfmOui The Organizational Unique Identifier of the local ECFM Client. This will be sent in the Information CFMPDU in Local Information TLV. Default for this object will be the first th…	scalar	FsEcfmOuiType	`.1.3.6.1.4.1.10876.101.1.150.1.3`
fsEcfmTraceOption This object is used to enable trace statements in Ethernat CFM module. A four byte integer is used for enabling the trace level. Each bit in the four byte integer represents …	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.10876.101.1.150.1.4`
fsEcfmLtrCacheStatus The administrative status of LTR cache. This enables or disables caching of CFM data learned through trace route messages	scalar	Enumeration	`.1.3.6.1.4.1.10876.101.1.150.1.5`
fsEcfmLtrCacheClear Indicates if the contents of traceroute cache are to be removed. If set to true then entries in traceroute cache are removed, and it sets to false.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.10876.101.1.150.1.6`
fsEcfmLtrCacheHoldTime Identifies the time in minutes for which CFM traceroute cache entries are retained	scalar	Integer32	`.1.3.6.1.4.1.10876.101.1.150.1.7`
fsEcfmLtrCacheSize Identifies the maximum no of entries for the CFM traceroute cache table, only if fsEcfmLtrCacheStatus is enabled	scalar	Integer32	`.1.3.6.1.4.1.10876.101.1.150.1.8`
fsEcfmPortTable List of Port related Parameters for ecfm module.	table	-	`.1.3.6.1.4.1.10876.101.1.150.1.9`

Child Objects