fsEcfmGlobalCcmOffload

SUPERMICRO-ECFM-MIB · .1.3.6.1.4.1.10876.101.1.150.1.28
MIB view Table view

Object

scalar r/w Enumeration 
The administrative Global CCMOffloading status.
when value 'enable' (1) is set then CCMOffloading will start for all the
MEPs in the system and will overwrite the per MEP offloading configuration.
when value 'disabled' (2) is set then CCMOffloading will be disabled for all the
MEPs in the system.
CCMOffloading is disabled by default.

Context

MIB
SUPERMICRO-ECFM-MIB
OID
.1.3.6.1.4.1.10876.101.1.150.1.28
Type
scalar
Access
readwrite
Status
current
Parent
fsEcfmSystem
Siblings
28

Syntax

Enumeration

Values & Constraints

Enumerated Values
1enabled
2disabled

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsEcfmSystemControl
The administrative system control status of Ethernet CFM module. The value 'start' (1) indicates that all resources required by ECFM module should be allocated and ECFM should be…
scalarEnumeration.1.3.6.1.4.1.10876.101.1.150.1.1
fsEcfmMipCcmDbStatus
The administrative status of MIP CCM DB . This enables or disables caching of data learned through CCM messages
scalarEnumeration.1.3.6.1.4.1.10876.101.1.150.1.10
fsEcfmMipCcmDbClear
Indicates if the contents of MIP CCM DB are to be removed. If set to true then entries in traceroute cache are removed, and it sets to false.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.1.150.1.11
fsEcfmMipCcmDbSize
Identifies the maximum no of entries for the MIP CCM DB table, only if fsEcfmMipDbStatus is enabled
scalarInteger32.1.3.6.1.4.1.10876.101.1.150.1.12
fsEcfmMipCcmDbHoldTime
Identifies the time in hours for which MIP CCM DB table entries are retained
scalarInteger32.1.3.6.1.4.1.10876.101.1.150.1.13
fsEcfmMemoryFailureCount
Identifies the number of memory allocation failures
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.150.1.14
fsEcfmBufferFailureCount
Identifies the number of buffer allocation failures
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.150.1.15
fsEcfmUpCount
Identifies the number of times module was enabled
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.150.1.16
fsEcfmDownCount
Identifies the number of times module was disabled
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.150.1.17
fsEcfmNoDftCount
Identifies the number of times no defect occured in any MEP
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.150.1.18
fsEcfmRdiDftCount
Identifies the number of times RDI defect occured in any MEP
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.150.1.19
fsEcfmModuleStatus
The administrative module status of Ethernet CFM module. This enables or disables ECFM in the system. A value of 'enabled' (1) indicates that ECFM is enabled in the device. A va…
scalarEnumeration.1.3.6.1.4.1.10876.101.1.150.1.2
fsEcfmMacStatusDftCount
Identifies the number of times MAC Status defect occured in any MEP
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.150.1.20
fsEcfmRemoteCcmDftCount
Identifies the number of times Remote CCM defect occured in any MEP
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.150.1.21
fsEcfmErrorCcmDftCount
Identifies the number of times Error CCM defect occured in any MEP
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.150.1.22
fsEcfmXconDftCount
Identifies the number of times Xconn defect occured in any MEP filtering rules
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.150.1.23
fsEcfmCrosscheckDelay
To configure the number of CCMs to be missed, for which a device waits for the remote maintenance end points(MEPs) to come up .if the user has not configured then we will use stan…
scalarInteger32.1.3.6.1.4.1.10876.101.1.150.1.24
fsEcfmMipDynamicEvaluationStatus
This enables or disables the implicit evaluation and creation of MIPs. is purged.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.1.150.1.25
fsEcfmMipTable
The Maintenance Intermediate Point (MIP) table. Each row in the table represents a different MIP. A MIP consists two MIP Half Functions (MHFs) on a single Bridge Port…
table-.1.3.6.1.4.1.10876.101.1.150.1.26
fsEcfmMipCcmDbTable
It is a list of every distinct {FID, source_address, InterfaceIndex} triple from all of the CCMs presented to all of the Bridge.s MPs. Continuity Check Receivers since the Bridge…
table-.1.3.6.1.4.1.10876.101.1.150.1.27
fsEcfmDynMipPreventionTable
The Dynamic Maintenance Intermediate Point (MIP) Prevention table. An entry in this table will restrict the automatic creation of MIPs for the corresponding index (IfIndex, MD Le…
table-.1.3.6.1.4.1.10876.101.1.150.1.29
fsEcfmOui
The Organizational Unique Identifier of the local ECFM Client. This will be sent in the Information CFMPDU in Local Information TLV. Default for this object will be the first th…
scalarFsEcfmOuiType.1.3.6.1.4.1.10876.101.1.150.1.3
fsEcfmTraceOption
This object is used to enable trace statements in Ethernat CFM module. A four byte integer is used for enabling the trace level. Each bit in the four byte integer represents …
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.1.150.1.4
fsEcfmLtrCacheStatus
The administrative status of LTR cache. This enables or disables caching of CFM data learned through trace route messages
scalarEnumeration.1.3.6.1.4.1.10876.101.1.150.1.5
fsEcfmLtrCacheClear
Indicates if the contents of traceroute cache are to be removed. If set to true then entries in traceroute cache are removed, and it sets to false.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.1.150.1.6
fsEcfmLtrCacheHoldTime
Identifies the time in minutes for which CFM traceroute cache entries are retained
scalarInteger32.1.3.6.1.4.1.10876.101.1.150.1.7
fsEcfmLtrCacheSize
Identifies the maximum no of entries for the CFM traceroute cache table, only if fsEcfmLtrCacheStatus is enabled
scalarInteger32.1.3.6.1.4.1.10876.101.1.150.1.8
fsEcfmPortTable
List of Port related Parameters for ecfm module.
table-.1.3.6.1.4.1.10876.101.1.150.1.9