dot11DisassociateStation
SUPERMICRO-DOT11u-MIB ·
.1.3.6.1.4.1.10876.101.2.78.1.2.1.1.31
Object
column
SNMPv2-TCMacAddress
This attribute holds the MAC address from the Address 1 field of the most recently transmitted Disassociation frame. If no Disassociation frame has been transmitted, the value of this attribute shall be 0.
Context
- MIB
- SUPERMICRO-DOT11u-MIB
- OID
.1.3.6.1.4.1.10876.101.2.78.1.2.1.1.31- Type
- column
- Access
- readonly
- Status
- current
- Parent
- dot11StationConfigEntry
- Table
- dot11StationConfigTable
- Siblings
- 37
Values & Constraints
Type Constraints
range: 6
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ifIndex This is a control variable.
It is written by an external management entity or the SME.
Changes take effect as soon as practical in the implementation.
The one octet identification… | column | Integer32 | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.1 |
| dot11SSPNInterfaceActivated .This is a control variable.
It is written by an external management entity or the SME.
Changes take effect as soon as practical in the implementation.
This attribute, when true, … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.10 |
| dot11HESSID .This is a control variable.
It is written by an external management entity or the SME. Changes take effect for the next MLME-Start.request
primitive.
This attribute is used by an… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.11 |
| dot11EASImplemented .This is a capability variable.
Its value is determined by device capabilities.
This attribute when true, indicates the STA is capable of
emergency alert system notification with … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.12 |
| dot11EASActivated This is a control variable.
It is written by an external management entity or the SME.
Changes take effect as soon as practical
This attribute when true, indicates the STA is capa… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.13 |
| dot11MSGCFImplemented This is a capability variable.
Its value is determined by device capabilities.
This attribute when true, indicates the non-AP STA is capable
of supporting the MSGCF procedures def… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.14 |
| dot11MSGCFActivated This is a control variable.
It is written by an external management entity or the SME.
Changes take effect as soon as practical in the implementation.
This attribute, when true, i… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.15 |
| dot11StationID deprecated The purpose of dot11StationID is to allow a manager to identify
a station for its own purposes. This attribute provides
for that eventuality while keeping the true MAC address
in… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.16 |
| dot11MediumOccupancyLimit This attribute shall indicate the maximum amount of time,
in TU, that a point coordinator may control the usage of
the wireless medium without relinquishing control for long
enoug… | column | Integer32 | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.17 |
| dot11CFPollable When this attribute is true, it shall indicate that the STA
is able to respond to a CF-Poll with a data frame within a
SIFS time. This attribute shall be false if the STA is not
a… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.18 |
| dot11CFPPeriod The attribute shall describe the number of DTIM intervals
between the start of CFPs. It is modified by
MLME-START.request primitive. | column | Integer32 | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.19 |
| dot11InterworkingServiceImplemented This is a capability variable.
Its value is determined by device capabilities.
This attribute when true, indicates the STA is capable of
interworking with external networks. A STA… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.2 |
| dot11CFPMaxDuration The attribute shall describe the maximum duration of the CFP
in TU that may be generated by the PCF. It is modified by
MLME-START.request primitive. | column | Integer32 | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.20 |
| dot11AuthenticationResponseTimeOut This attribute shall specify the number of TU that a
responding STA should wait for the next frame in the
authentication sequence. | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.21 |
| dot11PrivacyOptionImplemented This attribute, when true, shall indicate that the IEEE
802.11 WEP option is implemented. The default value of
this attribute shall be false. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.22 |
| dot11PowerManagementMode This attribute shall specify the power management
mode of the STA. When set to active, it shall indicate
that the station is not in power-save mode. When set
to powersave, it shal… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.23 |
| dot11DesiredSSID This attribute reflects the Service Set ID used
in the DesiredSSID parameter of the most recent
MLME_Scan.request. This value may be modified
by an external management entity and… | column | OctetString | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.24 |
| dot11DesiredBSSType This attribute shall specify the type of BSS the
station shall use when scanning for a BSS with which
to synchronize. This value is used to filter Probe
Response frames and Beacon… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.25 |
| dot11OperationalRateSet This attribute shall specify the set of data rates
at which the station may transmit data. Each octet
contains a value representing a rate. Each rate
shall be within the range … | column | OctetString | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.26 |
| dot11BeaconPeriod This attribute shall specify the number of TU that a
station shall use for scheduling Beacon transmissions.
This value is transmitted in Beacon and Probe Response
frames. | column | Integer32 | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.27 |
| dot11DTIMPeriod This attribute shall specify the number of beacon
intervals that shall elapse between transmission of
Beacons frames containing a TIM element whose DTIM
Count field is 0. This val… | column | Integer32 | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.28 |
| dot11AssociationResponseTimeOut This attribute shall specify the number of TU that a
requesting STA should wait for a response to a
transmitted association-request MMPDU. | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.29 |
| dot11InterworkingServiceActivated This is a capability variable.
Its value is determined by device capabilities.
This attribute when true, indicates the STA is capable of
interworking with external networks. A STA… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.3 |
| dot11DisassociateReason This attribute holds the most recently transmitted Reason
Code in a Disassociation frame. If no Disassociation frame
has been transmitted, the value of this attribute shall be 0. | column | Integer32 | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.30 |
| dot11DeauthenticateReason This attribute holds the most recently transmitted Reason
Code in a Deauthentication frame. If no Deauthentication
frame has been transmitted, the value of this attribute shall b… | column | Integer32 | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.32 |
| dot11DeauthenticateStation This attribute holds the MAC address from the Address 1 field
of the most recently transmitted Deauthentication frame. If no
Deauthentication frame has been transmitted, the valu… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.33 |
| dot11AuthenticateFailStatus This attribute holds the most recently transmitted Status
Code in a failed Authentication frame. If no failed
Athentication frame has been transmitted, the value of this
attribut… | column | Integer32 | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.34 |
| dot11AuthenticateFailStation This attribute holds the MAC address from the Address 1 field
of the most recently transmitted failed Authentication frame.
If no failed Authentication frame has been transmitted,… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.35 |
| dot11MultiDomainCapabilityImplemented This attribute, when TRUE, indicates that the station implementation is capable of supporting multiple re gulatory domains. The capability is
disabled, otherwise. … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.36 |
| dot11MultiDomainCapabilityEnabled This attribute, when TRUE, indicates that the capability of the station to
operate in multiple regulatory domains is enabled. The capability is
disabled, otherwise. The default va… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.37 |
| dot11CountryString This attribute identifies the country in which the station is operating.
The first two octets if this string is the two character country code as
described in document ISO/IEC 316… | column | OctetString | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.38 |
| dot11QosmapImplemented This is a capability variable.
Its value is determined by device capabilities.
This attribute available at STAs, when true, indicates the
STA is capable of supporting the QoS Map … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.4 |
| dot11QosMapActivated .This is a control variable.
It is written by an external management entity or the SME. Changes take effect as soon as practical in the implementation.
This attribute, when true, … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.5 |
| dot11EBRImplemented This is a capability variable.
ts value is determined by device capabilities.
his attribute available at STAs, when true, indicates the
TA is capable of supporting Expedited Bandw… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.6 |
| dot11EBRActivated This is a control variable.
t is written by an external management entity or the SME. Changes take effect as soon as practical in the implementation.
his attribute, when true, ind… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.7 |
| dot11ESNetwork This is a control variable.
t is written by an external management entity or the SME. Changes take effect as soon as practical in the implementation.
he Emergency Services Access … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.8 |
| dot11SSPNInterfaceImplemented .This is a capability variable.
Its value is determined by device capabilities.
This attribute when true, indicates the AP is capable of SSPN
Interface service. When this is false… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.9 |