dot11CountryString
SUPERMICRO-DOT11u-MIB ·
.1.3.6.1.4.1.10876.101.2.78.1.2.1.1.38
Object
column
OctetString
This attribute identifies the country in which the station is operating.
The first two octets if this string is the two character country code as
described in document ISO/IEC 3166-1. The third octet shall be one of the
following:
1. an ASCII space character, if the regulations under which the
station is operating encompass all environments in the country,
2. an ASCII Ocharacter, if the regulations under which the
station is operating are for an Outdoor environment only, or
3. an ASCII Icharacter, if the regulations under which the
station is operating are for an Indoor environment only.
Context
- MIB
- SUPERMICRO-DOT11u-MIB
- OID
.1.3.6.1.4.1.10876.101.2.78.1.2.1.1.38- Type
- column
- Access
- readonly
- Status
- current
- Parent
- dot11StationConfigEntry
- Table
- dot11StationConfigTable
- Siblings
- 37
Syntax
OctetString
Values & Constraints
Object Constraints
range: 3-3
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ifIndex This is a control variable.
It is written by an external management entity or the SME.
Changes take effect as soon as practical in the implementation.
The one octet identification… | column | Integer32 | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.1 |
| dot11SSPNInterfaceActivated .This is a control variable.
It is written by an external management entity or the SME.
Changes take effect as soon as practical in the implementation.
This attribute, when true, … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.10 |
| dot11HESSID .This is a control variable.
It is written by an external management entity or the SME. Changes take effect for the next MLME-Start.request
primitive.
This attribute is used by an… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.11 |
| dot11EASImplemented .This is a capability variable.
Its value is determined by device capabilities.
This attribute when true, indicates the STA is capable of
emergency alert system notification with … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.12 |
| dot11EASActivated This is a control variable.
It is written by an external management entity or the SME.
Changes take effect as soon as practical
This attribute when true, indicates the STA is capa… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.13 |
| dot11MSGCFImplemented This is a capability variable.
Its value is determined by device capabilities.
This attribute when true, indicates the non-AP STA is capable
of supporting the MSGCF procedures def… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.14 |
| dot11MSGCFActivated This is a control variable.
It is written by an external management entity or the SME.
Changes take effect as soon as practical in the implementation.
This attribute, when true, i… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.15 |
| dot11StationID deprecated The purpose of dot11StationID is to allow a manager to identify
a station for its own purposes. This attribute provides
for that eventuality while keeping the true MAC address
in… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.16 |
| dot11MediumOccupancyLimit This attribute shall indicate the maximum amount of time,
in TU, that a point coordinator may control the usage of
the wireless medium without relinquishing control for long
enoug… | column | Integer32 | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.17 |
| dot11CFPollable When this attribute is true, it shall indicate that the STA
is able to respond to a CF-Poll with a data frame within a
SIFS time. This attribute shall be false if the STA is not
a… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.18 |
| dot11CFPPeriod The attribute shall describe the number of DTIM intervals
between the start of CFPs. It is modified by
MLME-START.request primitive. | column | Integer32 | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.19 |
| dot11InterworkingServiceImplemented This is a capability variable.
Its value is determined by device capabilities.
This attribute when true, indicates the STA is capable of
interworking with external networks. A STA… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.2 |
| dot11CFPMaxDuration The attribute shall describe the maximum duration of the CFP
in TU that may be generated by the PCF. It is modified by
MLME-START.request primitive. | column | Integer32 | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.20 |
| dot11AuthenticationResponseTimeOut This attribute shall specify the number of TU that a
responding STA should wait for the next frame in the
authentication sequence. | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.21 |
| dot11PrivacyOptionImplemented This attribute, when true, shall indicate that the IEEE
802.11 WEP option is implemented. The default value of
this attribute shall be false. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.22 |
| dot11PowerManagementMode This attribute shall specify the power management
mode of the STA. When set to active, it shall indicate
that the station is not in power-save mode. When set
to powersave, it shal… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.23 |
| dot11DesiredSSID This attribute reflects the Service Set ID used
in the DesiredSSID parameter of the most recent
MLME_Scan.request. This value may be modified
by an external management entity and… | column | OctetString | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.24 |
| dot11DesiredBSSType This attribute shall specify the type of BSS the
station shall use when scanning for a BSS with which
to synchronize. This value is used to filter Probe
Response frames and Beacon… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.25 |
| dot11OperationalRateSet This attribute shall specify the set of data rates
at which the station may transmit data. Each octet
contains a value representing a rate. Each rate
shall be within the range … | column | OctetString | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.26 |
| dot11BeaconPeriod This attribute shall specify the number of TU that a
station shall use for scheduling Beacon transmissions.
This value is transmitted in Beacon and Probe Response
frames. | column | Integer32 | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.27 |
| dot11DTIMPeriod This attribute shall specify the number of beacon
intervals that shall elapse between transmission of
Beacons frames containing a TIM element whose DTIM
Count field is 0. This val… | column | Integer32 | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.28 |
| dot11AssociationResponseTimeOut This attribute shall specify the number of TU that a
requesting STA should wait for a response to a
transmitted association-request MMPDU. | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.29 |
| dot11InterworkingServiceActivated This is a capability variable.
Its value is determined by device capabilities.
This attribute when true, indicates the STA is capable of
interworking with external networks. A STA… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.3 |
| dot11DisassociateReason This attribute holds the most recently transmitted Reason
Code in a Disassociation frame. If no Disassociation frame
has been transmitted, the value of this attribute shall be 0. | column | Integer32 | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.30 |
| dot11DisassociateStation This attribute holds the MAC address from the Address 1 field
of the most recently transmitted Disassociation frame. If no
Disassociation frame has been transmitted, the value of… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.31 |
| dot11DeauthenticateReason This attribute holds the most recently transmitted Reason
Code in a Deauthentication frame. If no Deauthentication
frame has been transmitted, the value of this attribute shall b… | column | Integer32 | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.32 |
| dot11DeauthenticateStation This attribute holds the MAC address from the Address 1 field
of the most recently transmitted Deauthentication frame. If no
Deauthentication frame has been transmitted, the valu… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.33 |
| dot11AuthenticateFailStatus This attribute holds the most recently transmitted Status
Code in a failed Authentication frame. If no failed
Athentication frame has been transmitted, the value of this
attribut… | column | Integer32 | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.34 |
| dot11AuthenticateFailStation This attribute holds the MAC address from the Address 1 field
of the most recently transmitted failed Authentication frame.
If no failed Authentication frame has been transmitted,… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.35 |
| dot11MultiDomainCapabilityImplemented This attribute, when TRUE, indicates that the station implementation is capable of supporting multiple re gulatory domains. The capability is
disabled, otherwise. … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.36 |
| dot11MultiDomainCapabilityEnabled This attribute, when TRUE, indicates that the capability of the station to
operate in multiple regulatory domains is enabled. The capability is
disabled, otherwise. The default va… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.37 |
| dot11QosmapImplemented This is a capability variable.
Its value is determined by device capabilities.
This attribute available at STAs, when true, indicates the
STA is capable of supporting the QoS Map … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.4 |
| dot11QosMapActivated .This is a control variable.
It is written by an external management entity or the SME. Changes take effect as soon as practical in the implementation.
This attribute, when true, … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.5 |
| dot11EBRImplemented This is a capability variable.
ts value is determined by device capabilities.
his attribute available at STAs, when true, indicates the
TA is capable of supporting Expedited Bandw… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.6 |
| dot11EBRActivated This is a control variable.
t is written by an external management entity or the SME. Changes take effect as soon as practical in the implementation.
his attribute, when true, ind… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.7 |
| dot11ESNetwork This is a control variable.
t is written by an external management entity or the SME. Changes take effect as soon as practical in the implementation.
he Emergency Services Access … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.8 |
| dot11SSPNInterfaceImplemented .This is a capability variable.
Its value is determined by device capabilities.
This attribute when true, indicates the AP is capable of SSPN
Interface service. When this is false… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.78.1.2.1.1.9 |