ifSecondaryIpAddressTable

SUPERMICRO-CFA-MIB · .1.3.6.1.4.1.10876.101.1.27.1.11
MIB view Table view

Object

table 
A list of secondary IP addresses configured over the 
interfaces registered with IP.
                
This table is a extension to the ifMainTable. 
The index to this table has the semantics of
the ifMainIndex of the ifMainTable.
          
Secondary IpAddress configuration should not override the 
primary ip address configured for any of the interface
          
Updation of entries in this table are not allowd when 
RowStatus is active

Context

MIB
SUPERMICRO-CFA-MIB
OID
.1.3.6.1.4.1.10876.101.1.27.1.11
Type
table
Status
current
Parent
if
Siblings
24
Children
1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ifMaxInterfaces deprecated
Specifies the maximum number of interfaces that can be present in the system.
scalarIF-MIBInterfaceIndex.1.3.6.1.4.1.10876.101.1.27.1.1
ifResetMgmtVlanList
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanId values 1 through 8; the second octet to VLANs 9 through 16 etc. The most signific…
scalarOctetString.1.3.6.1.4.1.10876.101.1.27.1.10
ifMainExtTable
This table is an extension to the ifMainTable.
table-.1.3.6.1.4.1.10876.101.1.27.1.12
ifCustTLVTable
This table allows generic TLV data to be configured per-port. It may be used to store any port-specific information that is required by any application.
table-.1.3.6.1.4.1.10876.101.1.27.1.13
ifCustOpaqueAttrTable
This table allows generic integer attributes to be configured per-port. These attributes will be opaque from ISS's point of view and will not be processed/understood by ISS.
table-.1.3.6.1.4.1.10876.101.1.27.1.14
ifBridgeILanIfTable
This table is used to read the status of an I-Lan interface created from Iftable. An I-LAN Interface is used to create internal connections between bridge ports in a 802.1 devic…
table-.1.3.6.1.4.1.10876.101.1.27.1.15
ifTypeProtoDenyTable
A table to configure the interface types and bridge port types accessible to various protocol(s). This table will indicate whether a particular type of interface is to be created…
table-.1.3.6.1.4.1.10876.101.1.27.1.16
ifmDebug
Enables the tracing in the selected submodule in CFA. A 32 bit integer is used to store the Tracing level in the specified module. Different Tracing Levels - BIT 0 - Initiali…
scalarUnsigned32.1.3.6.1.4.1.10876.101.1.27.1.17
ifIvrMappingTable
This table is used to configure the list of vlans to be associated for an IVR interface. The primary Index to this table can only be a IVR interface.
table-.1.3.6.1.4.1.10876.101.1.27.1.18
ifHCErrorTable
A list of interface entries. The number of entries is given by the value of ifNumber. This table contains additional objects for the interface table.
table-.1.3.6.1.4.1.10876.101.1.27.1.19
ifMaxPhysInterfaces deprecated
Specifies the maximum number of physical interfaces that can be present in the system.
scalarIF-MIBInterfaceIndex.1.3.6.1.4.1.10876.101.1.27.1.2
ifSecurityBridging
Enables or Disables Security for Bridged Packets globally.
scalarEnumeration.1.3.6.1.4.1.10876.101.1.27.1.20
ifSetSecVlanList
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanId values 1 through 8; the second octet to VLANs 9 through 16 etc. The most signific…
scalarOctetString.1.3.6.1.4.1.10876.101.1.27.1.21
ifResetSecVlanList
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanId values 1 through 8; the second octet to VLANs 9 through 16 etc. The most signific…
scalarOctetString.1.3.6.1.4.1.10876.101.1.27.1.22
ifSecIvrIfIndex
An Integer which Indicates the IfIndex of IVR Interface used in Security Processing of Bridged Traffic
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.1.27.1.23
ifAvailableIndexTable
This table returns the next available free interface index for the given interface type
table-.1.3.6.1.4.1.10876.101.1.27.1.24
ifACTable
A list of Attachment Circuit interface related configurations. Attachment Circuit is a virtual interface that is a combination of physical port and customer vlan identifier or it…
table-.1.3.6.1.4.1.10876.101.1.27.1.25
ifAvailableIndex
Shows an ifIndex which is available for creation of any new virtual (non-physical) interface in the system. This ifIndex value can be used for creation of interfaces in the ifMain…
scalarIF-MIBInterfaceIndex.1.3.6.1.4.1.10876.101.1.27.1.3
ifMainTable
A list of all the interface entries in the system. This table contains objects which are applicable to all types of interfaces in the system. This table is a proprietary extensi…
table-.1.3.6.1.4.1.10876.101.1.27.1.4
ifIpTable
A list of all the interface entries in the system which are registered with IP. This table contains objects which are applicable for the management of IP over the…
table-.1.3.6.1.4.1.10876.101.1.27.1.5
ifWanTable deprecated
A list of all the WAN interfaces in the system. This table contains objects which are applicable for the management of WAN interfaces like PPP, MP bundle and FR/X.25/AT…
table-.1.3.6.1.4.1.10876.101.1.27.1.6
ifAutoCktProfileTable deprecated
A list of all the automatic circuit profiles in the system. This table contains objects which are useful for configuration of an automatic circuit profile for a given interface. …
table-.1.3.6.1.4.1.10876.101.1.27.1.7
ifIvrTable
A list of all the interfaces in the system with IVR related configurations. This table is an extension to the ifMainTable. The index to this table has the semantics of…
table-.1.3.6.1.4.1.10876.101.1.27.1.8
ifSetMgmtVlanList
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanId values 1 through 8; the second octet to VLANs 9 through 16 etc. The most signific…
scalarOctetString.1.3.6.1.4.1.10876.101.1.27.1.9
Child Objects
ObjectTypeSyntaxOID
ifSecondaryIpAddressEntry
An entry contains the information associated with the secondary(additional) ip address configured to a particular interface.
row-.1.3.6.1.4.1.10876.101.1.27.1.11.1