ifMainExtTable

SUPERMICRO-CFA-MIB · .1.3.6.1.4.1.10876.101.1.27.1.12

Object

table

This table is an extension to the ifMainTable.

Context

MIB: SUPERMICRO-CFA-MIB
OID: .1.3.6.1.4.1.10876.101.1.27.1.12
Type: table
Status: current
Parent: if
Siblings: 24
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
ifMaxInterfaces deprecated Specifies the maximum number of interfaces that can be present in the system.	scalar	IF-MIBInterfaceIndex	`.1.3.6.1.4.1.10876.101.1.27.1.1`
ifResetMgmtVlanList A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanId values 1 through 8; the second octet to VLANs 9 through 16 etc. The most signific…	scalar	OctetString	`.1.3.6.1.4.1.10876.101.1.27.1.10`
ifSecondaryIpAddressTable A list of secondary IP addresses configured over the interfaces registered with IP. This table is a extension to the ifMainTable. The index to this table has th…	table	-	`.1.3.6.1.4.1.10876.101.1.27.1.11`
ifCustTLVTable This table allows generic TLV data to be configured per-port. It may be used to store any port-specific information that is required by any application.	table	-	`.1.3.6.1.4.1.10876.101.1.27.1.13`
ifCustOpaqueAttrTable This table allows generic integer attributes to be configured per-port. These attributes will be opaque from ISS's point of view and will not be processed/understood by ISS.	table	-	`.1.3.6.1.4.1.10876.101.1.27.1.14`
ifBridgeILanIfTable This table is used to read the status of an I-Lan interface created from Iftable. An I-LAN Interface is used to create internal connections between bridge ports in a 802.1 devic…	table	-	`.1.3.6.1.4.1.10876.101.1.27.1.15`
ifTypeProtoDenyTable A table to configure the interface types and bridge port types accessible to various protocol(s). This table will indicate whether a particular type of interface is to be created…	table	-	`.1.3.6.1.4.1.10876.101.1.27.1.16`
ifmDebug Enables the tracing in the selected submodule in CFA. A 32 bit integer is used to store the Tracing level in the specified module. Different Tracing Levels - BIT 0 - Initiali…	scalar	Unsigned32	`.1.3.6.1.4.1.10876.101.1.27.1.17`
ifIvrMappingTable This table is used to configure the list of vlans to be associated for an IVR interface. The primary Index to this table can only be a IVR interface.	table	-	`.1.3.6.1.4.1.10876.101.1.27.1.18`
ifHCErrorTable A list of interface entries. The number of entries is given by the value of ifNumber. This table contains additional objects for the interface table.	table	-	`.1.3.6.1.4.1.10876.101.1.27.1.19`
ifMaxPhysInterfaces deprecated Specifies the maximum number of physical interfaces that can be present in the system.	scalar	IF-MIBInterfaceIndex	`.1.3.6.1.4.1.10876.101.1.27.1.2`
ifSecurityBridging Enables or Disables Security for Bridged Packets globally.	scalar	Enumeration	`.1.3.6.1.4.1.10876.101.1.27.1.20`
ifSetSecVlanList A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanId values 1 through 8; the second octet to VLANs 9 through 16 etc. The most signific…	scalar	OctetString	`.1.3.6.1.4.1.10876.101.1.27.1.21`
ifResetSecVlanList A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanId values 1 through 8; the second octet to VLANs 9 through 16 etc. The most signific…	scalar	OctetString	`.1.3.6.1.4.1.10876.101.1.27.1.22`
ifSecIvrIfIndex An Integer which Indicates the IfIndex of IVR Interface used in Security Processing of Bridged Traffic	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.10876.101.1.27.1.23`
ifAvailableIndexTable This table returns the next available free interface index for the given interface type	table	-	`.1.3.6.1.4.1.10876.101.1.27.1.24`
ifACTable A list of Attachment Circuit interface related configurations. Attachment Circuit is a virtual interface that is a combination of physical port and customer vlan identifier or it…	table	-	`.1.3.6.1.4.1.10876.101.1.27.1.25`
ifAvailableIndex Shows an ifIndex which is available for creation of any new virtual (non-physical) interface in the system. This ifIndex value can be used for creation of interfaces in the ifMain…	scalar	IF-MIBInterfaceIndex	`.1.3.6.1.4.1.10876.101.1.27.1.3`
ifMainTable A list of all the interface entries in the system. This table contains objects which are applicable to all types of interfaces in the system. This table is a proprietary extensi…	table	-	`.1.3.6.1.4.1.10876.101.1.27.1.4`
ifIpTable A list of all the interface entries in the system which are registered with IP. This table contains objects which are applicable for the management of IP over the…	table	-	`.1.3.6.1.4.1.10876.101.1.27.1.5`
ifWanTable deprecated A list of all the WAN interfaces in the system. This table contains objects which are applicable for the management of WAN interfaces like PPP, MP bundle and FR/X.25/AT…	table	-	`.1.3.6.1.4.1.10876.101.1.27.1.6`
ifAutoCktProfileTable deprecated A list of all the automatic circuit profiles in the system. This table contains objects which are useful for configuration of an automatic circuit profile for a given interface. …	table	-	`.1.3.6.1.4.1.10876.101.1.27.1.7`
ifIvrTable A list of all the interfaces in the system with IVR related configurations. This table is an extension to the ifMainTable. The index to this table has the semantics of…	table	-	`.1.3.6.1.4.1.10876.101.1.27.1.8`
ifSetMgmtVlanList A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanId values 1 through 8; the second octet to VLANs 9 through 16 etc. The most signific…	scalar	OctetString	`.1.3.6.1.4.1.10876.101.1.27.1.9`

Child Objects