ifAutoProfileEncapType
SUPERMICRO-CFA-MIB ·
.1.3.6.1.4.1.10876.101.1.27.1.7.1.7
Object
column
deprecated
r/w
Enumeration
The encapsulation type to be used over the automatic
circuit.
For FR interface, the value can be nlpid(2) (for carrying protocols
which have NLPID) or nlpidSnap(3) (for other protocols). The
default is nlpid(2) and the types of protocols supported are
inferred from the stack-layering implemented over the
interface.
For X.25 interface, the value can be nlpid(2) or nlpidSnap(3)
(where the VC can carry multiplexed protocol traffic with
each data packet containing the NLPID or SNAP header) or
cudNlpid(4) or cudNlpidSnap(5) (where the CUD specifies
the NLPID of the protocol or SNAP and the data packets do
not contain these headers - for dedicated VCs). The default
is cudNlpid(4).
For ATM interface, the default is llcSnap(6) but the
vcMultiplexed(7) encapsulation is also supported.
Context
- MIB
- SUPERMICRO-CFA-MIB
- OID
.1.3.6.1.4.1.10876.101.1.27.1.7.1.7- Type
- column
- Access
- readwrite
- Status
- deprecated
- Parent
- ifAutoProfileEntry
- Table
- ifAutoCktProfileTable
- Siblings
- 8
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | other |
2 | nlpid |
3 | nlpidSnap |
4 | cudNlpid |
5 | cudNlpidSnap |
6 | llcSnap |
7 | vcMultiplexed |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ifAutoProfileIfIndex deprecated The MIB-2 ifIndex of the interface for which
this automatic circuit profile is applicable.
All incoming calls on this interface will be
handled/configured according to this profil… | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.10876.101.1.27.1.7.1.1 |
| ifAutoProfileIfType deprecated The type of the WAN interface. This is
same as if MIB-2 ifType and ifMainType. | column | Enumeration | .1.3.6.1.4.1.10876.101.1.27.1.7.1.2 |
| ifAutoProfileIpAddrAllocMethod deprecated The mechanism to be used for allocation of IP
address for this interface.
The value negotiation can be used only if PPP
or MLPPP interfaces are to run over the aut… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.27.1.7.1.3 |
| ifAutoProfileDefIpSubnetMask deprecated Specifies the default IP Subnet Mask for this
profile. The value should be specified only
for network interfaces and any valid VLSM is
accepted.
If not specified, … | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.10876.101.1.27.1.7.1.4 |
| ifAutoProfileDefIpBroadcastAddr deprecated Specifies the default IP broadcast address for this
interface. Any valid broadcast
address based on a valid VLSM is accepted.
If not specified, this object takes t… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.10876.101.1.27.1.7.1.5 |
| ifAutoProfileIdleTimeout deprecated The minimum duration (in seconds) to wait before
disconnecting an idle automatic circuit. Specification
of the object is mandatory. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.27.1.7.1.6 |
| ifAutoProfileIpQosProfileIndex deprecated The index of an IP-QoS profile which is configured
in the IP-QoS MIB. Assigning the index of the profile
results in instantiation of that profile for any
automatic circuit which i… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.27.1.7.1.8 |
| ifAutoProfileRowStatus deprecated A RowStatus object for creation of automatic circuit
profile on a per interface basis.
It is necessary to create the parent FR,X.25 or ATM/IPoA
interface before cre… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.10876.101.1.27.1.7.1.9 |