fsBfdTrapEnable

SUPERMICRO-BFD-MIB · .1.3.6.1.4.1.10876.101.2.53.1.3
MIB view Table view

Object

scalar r/w SNMPv2-SMIInteger32 
This object is used to enable or disable specific traps in the 
system. The bit positions to enable specific traps are as shown
below :
          
Bit 0  - enables the bfdSessUp/bfdSessDown notification
Bit 1  - enables the fsBfdSessBtstrapFailTrap notificaton 
Bit 2  - enables the fsBfdSessNegTxIntvlChange notification 
Bit 3  - enables the fsBfdSessAdminCtrlErrTrap notification 
          
A value of zero(0) indicates traps are disabled and a value with 
all bits set to one indicates all traps are enabled. 
By default no traps will be enabled.
Note that bfdSessUp and bfdSessDown notifications
can be set either using the object bfdSessNotificationsEnable
or using this object and the same will be reflected in both the
objects

Context

MIB
SUPERMICRO-BFD-MIB
OID
.1.3.6.1.4.1.10876.101.2.53.1.3
Type
scalar
Access
readwrite
Status
current
Parent
fsBfdGlobals
Siblings
11

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsBfdSystemControl
The administrative system control status of the BFD module. The value 'start' (1) indicates that the BFD feature should be started in the system and all resources required by the…
scalarEnumeration.1.3.6.1.4.1.10876.101.2.53.1.1
fsBfdInputQOverFlows
This object gives the count of total input queue overflows for the BFD module
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.10876.101.2.53.1.10
fsBfdClrGblStats
This object is used to clear the global statistics of the BFD module. Setting this object to true will cause the statistics to be reset and setting this object to false will have…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.2.53.1.11
fsBfdClrAllSessStats
This object is used to clear all the statistics and counters of all the BFD sessions currently running in the system. Setting this object to true will cause the statistics to be …
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.2.53.1.13
fsBfdTraceLevel
This object is used to store the trace options that are enabled by the user. The bit positions to enable specific traces are as shown below : Bit 0 - init-shut Bit 1 …
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.2.53.1.2
fsBfdGblSessOperMode
This object specifies the operating mode applicable to all BFD sessions in the system. This value will serve as the default operational mode for all BFD session entries during s…
scalar-.1.3.6.1.4.1.10876.101.2.53.1.4
fsBfdGblDesiredMinTxIntvl
This object specifies the minimum interval, in microseconds, that the local system would like to use when transmitting BFD Control packets. This value will serve as the default d…
scalarBFD-TC-STD-MIBBfdIntervalTC.1.3.6.1.4.1.10876.101.2.53.1.5
fsBfdGblReqMinRxIntvl
This object specifies the minimum interval, in microseconds, between received BFD Control packets the local system is capable of supporting. This value will serve as the default…
scalarBFD-TC-STD-MIBBfdIntervalTC.1.3.6.1.4.1.10876.101.2.53.1.6
fsBfdGblDetectMult
This object specifies the Detect time multiplier. This value will serve as the default detect time multiplier for all BFD session entries during session entry creation , in the a…
scalarBFD-TC-STD-MIBBfdMultiplierTC.1.3.6.1.4.1.10876.101.2.53.1.7
fsBfdGblSlowTxIntvl
This object specifies the interval, in microseconds, between BFD control packet transmission (bootstrapped or otherwise) during the BFD session establishment process until the s…
scalarUnsigned32.1.3.6.1.4.1.10876.101.2.53.1.8
fsBfdMemAllocFailure
This object gives the count of total memory allocation failures in the BFD module
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.10876.101.2.53.1.9