fsBfdGblSlowTxIntvl
SUPERMICRO-BFD-MIB ·
.1.3.6.1.4.1.10876.101.2.53.1.8
Object
scalar
r/w
Unsigned32
This object specifies the interval, in microseconds, between BFD control packet transmission (bootstrapped or otherwise) during the BFD session establishment process until the session comes to the UP state at both end systems. After the session is in the UP state in both the local and remote system, the packets will be transmitted at an interval influenced by the session's negotiated transmit interval and the value in this object will not be used.
Context
- MIB
- SUPERMICRO-BFD-MIB
- OID
.1.3.6.1.4.1.10876.101.2.53.1.8- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- fsBfdGlobals
- Siblings
- 11
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 1000000-4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsBfdSystemControl The administrative system control status of the BFD module.
The value 'start' (1) indicates that the BFD feature should be
started in the system and all resources required by
the… | scalar | Enumeration | .1.3.6.1.4.1.10876.101.2.53.1.1 |
| fsBfdInputQOverFlows This object gives the count of total input queue overflows for the
BFD module | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.10876.101.2.53.1.10 |
| fsBfdClrGblStats This object is used to clear the global statistics of the BFD
module.
Setting this object to true will cause the statistics to be reset
and setting this object to false will have… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.53.1.11 |
| fsBfdClrAllSessStats This object is used to clear all the statistics and counters of all
the BFD sessions currently running in the system. Setting this
object to true will cause the statistics to be … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.53.1.13 |
| fsBfdTraceLevel This object is used to store the trace options that are enabled
by the user. The bit positions to enable specific traces are as
shown below :
Bit 0 - init-shut
Bit 1 … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.2.53.1.2 |
| fsBfdTrapEnable This object is used to enable or disable specific traps in the
system. The bit positions to enable specific traps are as shown
below :
Bit 0 - enables the bfdSessUp/b… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.2.53.1.3 |
| fsBfdGblSessOperMode This object specifies the operating mode applicable to all BFD
sessions in the system. This value will serve as the default
operational mode for all BFD session entries during s… | scalar | - | .1.3.6.1.4.1.10876.101.2.53.1.4 |
| fsBfdGblDesiredMinTxIntvl This object specifies the minimum interval, in microseconds, that
the local system would like to use when transmitting BFD Control
packets. This value will serve as the default d… | scalar | BFD-TC-STD-MIBBfdIntervalTC | .1.3.6.1.4.1.10876.101.2.53.1.5 |
| fsBfdGblReqMinRxIntvl This object specifies the minimum interval, in microseconds,
between received BFD Control packets the local system is capable
of supporting. This value will serve as the default… | scalar | BFD-TC-STD-MIBBfdIntervalTC | .1.3.6.1.4.1.10876.101.2.53.1.6 |
| fsBfdGblDetectMult This object specifies the Detect time multiplier. This value will
serve as the default detect time multiplier for all BFD session
entries during session entry creation , in the a… | scalar | BFD-TC-STD-MIBBfdMultiplierTC | .1.3.6.1.4.1.10876.101.2.53.1.7 |
| fsBfdMemAllocFailure This object gives the count of total memory allocation failures in
the BFD module | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.10876.101.2.53.1.9 |