fsBfdSessAdminCtrlErrReason
SUPERMICRO-BFD-MIB ·
.1.3.6.1.4.1.10876.101.2.53.2.1.1.9
Object
column
Enumeration
This object specifies the reason for an error in the BFD session. For instance, when offloading of a BFD session fails due to any reason, this object is set to the value sessOffloadFailure. Similarly if a period mis-configuration defect is detected, this object specifies the same and is set to periodMisConfigDefect(2). By default when there is no error value none(0)is used.
Context
- MIB
- SUPERMICRO-BFD-MIB
- OID
.1.3.6.1.4.1.10876.101.2.53.2.1.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- fsBfdSessionEntry
- Table
- fsBfdSessionTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | none |
1 | sessOffloadFailure |
2 | periodMisConfigDefect |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsBfdSessRole This object specifies whether the system is playing the
active(1) role or the passive(2) role for this BFD session.
BFD session will not come up if both the ends of a path are
co… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.53.2.1.1.1 |
| fsBfdSessMapType This object indicates the type of path being monitored by this
BFD session entry. | column | FsSessionMapTypeTC | .1.3.6.1.4.1.10876.101.2.53.2.1.1.10 |
| fsBfdSessMapPointer If fsBfdSessMapType is ldpipv4(1) or ldpipv6(2), then this object
MUST contain zeroDotZero or point to an instance of the mplsXCEntry
indicating the LDP-based LSP associated with… | column | SNMPv2-TCRowPointer | .1.3.6.1.4.1.10876.101.2.53.2.1.1.11 |
| fsBfdSessCardNumber This object specifies the card number to which the BFD session is
offloaded. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.53.2.1.1.12 |
| fsBfdSessSlotNumber This object specifies the slot number to which the BFD session
is offloaded. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.53.2.1.1.13 |
| fsBfdSessRegisteredClients This object specifies the BFD clients who are all registered for the
particular session. When each client register for the session, the
bit corresponding to the Client ID will b… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.53.2.1.1.14 |
| fsBfdSessMode This object specifies whether the BFD session is running in
Continuity Check(CC) or the Connectivity Verification(CV) mode.
This object is always cc(1) if the value of fsBfdSessM… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.53.2.1.1.2 |
| fsBfdSessRemoteDiscr This object specifies the session discriminator that is to be used
by the remote system for this BFD session. This object is
configurable for both MPLS and MPLS-TP paths.
… | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.53.2.1.1.3 |
| fsBfdSessEXPValue This object specifies the MPLS experimental field(traffic class
field) value that should be sent in the MPLS header for the
BFD control packets. | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.53.2.1.1.4 |
| fsBfdSessTmrNegotiate This object specifies if timer negotiation is required for
the BFD session. When set to false, timer negotiation is
disabled and if the value of the received DesiredMinTxInterval… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.53.2.1.1.5 |
| fsBfdSessOffld This object specifies if the BFD session needs to be
offloaded onto a specific hardware chipset or an external
software component or a seperate CPU/Core. When set to true
the BFD… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.53.2.1.1.6 |
| fsBfdSessEncapType This object specifies the encapsulation type of the
BFD Control packets. In case of MPLS LSP/Tunnel, the
encapsulation type should be set to mplsIp, which is the
default value f… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.53.2.1.1.7 |
| fsBfdSessAdminCtrlReq This object specifies if an administrator control or
intervention is required for the session due to an
error specified by fsBfdSessAdminCtrlErrReason. This object
will display … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.53.2.1.1.8 |