sub10UnitMgmtSnmpv3

SUB10SYSTEMS-MIB · .1.3.6.1.4.1.39003.3.2.7.4

MIB view Table view

Object

scalar r/w Sub10State

If set to 'enabled' the agent will support SNMPv3
PDUs and the SNMPv3 MIB configuration. This can be set to enabled or
disabled independently of the object sub10UnitMgmtSnmpAgent which
enables or disables the v1/2c agent.
          
IMPORTANT: This object is controlled by transaction management.
Any changes to this object must be transactionally acknowledged
following a successful set thus protecting against loss of
communication with the unit. To acknowledge the transaction
set the object sub10UnitMgmtTransaction to transactionCommit(2).

Context

MIB: SUB10SYSTEMS-MIB
OID: .1.3.6.1.4.1.39003.3.2.7.4
Type: scalar
Access: readwrite
Status: current
Parent: sub10UnitMgmtSnmp
Siblings: 16

Syntax

Sub10State

Source: Sub10State
Base type: Enumeration

Values & Constraints

Type Values

`0`	stateDisabled
`1`	stateEnabled

Related Objects

Sibling Objects

Object	Type	Syntax	OID
sub10UnitMgmtSnmpAgent If set to 'enabled' the agent will respond to valid v1/2c SNMP requests for GET/SET/GET-NEXT of supported MIB objects. If this object and the object sub10UnitMgmtSnmpv3 are both s…	scalar	Sub10State	`.1.3.6.1.4.1.39003.3.2.7.1`
sub10UnitMgmtSnmpOperPrivProto The privacy protocol currently assigned to users of group type operation.	scalar	Sub10Snmpv3PrivProtocol	`.1.3.6.1.4.1.39003.3.2.7.10`
sub10UnitMgmtSnmpAdminAuthProto The authentication protocol currently assigned to users of group type administration.	scalar	Sub10Snmpv3AuthProtocol	`.1.3.6.1.4.1.39003.3.2.7.11`
sub10UnitMgmtSnmpAdminPrivProto The privacy protocol currently assigned to users of group type administration.	scalar	Sub10Snmpv3PrivProtocol	`.1.3.6.1.4.1.39003.3.2.7.12`
sub10UnitMgmtSnmpMaintAuthProto The authentication protocol currently assigned to users of group type maintenance.	scalar	Sub10Snmpv3AuthProtocol	`.1.3.6.1.4.1.39003.3.2.7.13`
sub10UnitMgmtSnmpMaintPrivProto The privacy protocol currently assigned to users of group type maintenance.	scalar	Sub10Snmpv3PrivProtocol	`.1.3.6.1.4.1.39003.3.2.7.14`
sub10UnitMgmtSnmpUserTable The table of SNMPv3 User configuration.	table	-	`.1.3.6.1.4.1.39003.3.2.7.15`
sub10UnitMgmtSnmpAccessTable The table of SNMPv3 Access configuration.	table	-	`.1.3.6.1.4.1.39003.3.2.7.16`
sub10UnitMgmtSnmpTargetTable The table of SNMPv3 Target configuration. This table defines the addresses of target SNMPv3 managers to send Notifications.	table	-	`.1.3.6.1.4.1.39003.3.2.7.17`
sub10UnitMgmtSnmpTraps If set to 'enabled' the agent will forward traps to all configured trap destinations. If disabled traps are discarded. Traps are not sent if sub10UnitMgmtSnmpAgent is 'disabled(2)…	scalar	Sub10State	`.1.3.6.1.4.1.39003.3.2.7.2`
sub10UnitMgmtSnmpv320Mib If set to 'enabled' the agent will support the Sub10 Systems v320 legacy MIB (LIBERATOR-MIB) objects and traps.	scalar	Sub10State	`.1.3.6.1.4.1.39003.3.2.7.3`
sub10UnitMgmtSnmpTrpDstTable The table listing the each trap destination the local unit. Each trap destination has an IpAddress and a trap community string	table	-	`.1.3.6.1.4.1.39003.3.2.7.5`
sub10UnitMgmtSnmpEngineIdFormat The format of this SNMP v3 agent's engine id. The engine id is administratively defined and is between 5 and 32 characters long and can be based on a number of formats defined her…	scalar	Enumeration	`.1.3.6.1.4.1.39003.3.2.7.6`
sub10UnitMgmtSnmpEngineIdText When sub10UnitMgmtSnmpEngineIdFormat='textString(4)' this object contains the administratively defined string used to build the SNMP v3 engine id in sub10UnitMgmtSnmpEngineId.	scalar	OctetString	`.1.3.6.1.4.1.39003.3.2.7.7`
sub10UnitMgmtSnmpEngineId The administratively assigned SNMP v3 engine id. The construction of the engine id is dependant on the setting of sub10UnitMgmtSnmpEngineIdFormat and must be unique to the unit.	scalar	OctetString	`.1.3.6.1.4.1.39003.3.2.7.8`
sub10UnitMgmtSnmpOperAuthProto The authentication protocol currently assigned to users of group type operation.	scalar	Sub10Snmpv3AuthProtocol	`.1.3.6.1.4.1.39003.3.2.7.9`