sub10UnitMgmtSnmpAgent
SUB10SYSTEMS-MIB ·
.1.3.6.1.4.1.39003.3.2.7.1
Object
scalar
r/w
Sub10State
If set to 'enabled' the agent will respond to valid v1/2c SNMP requests
for GET/SET/GET-NEXT of supported MIB objects. If this object and the
object sub10UnitMgmtSnmpv3 are both set to disabled then the unit
will no longer respond to SNMP requests. If this object is set to
enabled and sub10UnitMgmtSnmpv3 is set to enabled then the agent will respond
to both both v1/2c and v3 SNMP requests.
!! IMPORTANT !!
If this object and sub10UnitMgmtSnmpv3 is set to disabled then the Agent
will no longer respond therefore it will not be possible to re-enable the agent using
SNMP. The agent can be re-enabled using the web GUI only.
If this object is disabled then traps will not be forwarded by the unit.
Context
- MIB
- SUB10SYSTEMS-MIB
- OID
.1.3.6.1.4.1.39003.3.2.7.1- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- sub10UnitMgmtSnmp
- Siblings
- 16
Syntax
Sub10State
- Source
- Sub10State
- Base type
Enumeration
Values & Constraints
Type Values
0 | stateDisabled |
1 | stateEnabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sub10UnitMgmtSnmpOperPrivProto The privacy protocol currently assigned to users of group type operation. | scalar | Sub10Snmpv3PrivProtocol | .1.3.6.1.4.1.39003.3.2.7.10 |
| sub10UnitMgmtSnmpAdminAuthProto The authentication protocol currently assigned to users of group type administration. | scalar | Sub10Snmpv3AuthProtocol | .1.3.6.1.4.1.39003.3.2.7.11 |
| sub10UnitMgmtSnmpAdminPrivProto The privacy protocol currently assigned to users of group type administration. | scalar | Sub10Snmpv3PrivProtocol | .1.3.6.1.4.1.39003.3.2.7.12 |
| sub10UnitMgmtSnmpMaintAuthProto The authentication protocol currently assigned to users of group type maintenance. | scalar | Sub10Snmpv3AuthProtocol | .1.3.6.1.4.1.39003.3.2.7.13 |
| sub10UnitMgmtSnmpMaintPrivProto The privacy protocol currently assigned to users of group type maintenance. | scalar | Sub10Snmpv3PrivProtocol | .1.3.6.1.4.1.39003.3.2.7.14 |
| sub10UnitMgmtSnmpUserTable The table of SNMPv3 User configuration. | table | - | .1.3.6.1.4.1.39003.3.2.7.15 |
| sub10UnitMgmtSnmpAccessTable The table of SNMPv3 Access configuration. | table | - | .1.3.6.1.4.1.39003.3.2.7.16 |
| sub10UnitMgmtSnmpTargetTable The table of SNMPv3 Target configuration.
This table defines the addresses of target SNMPv3 managers to send
Notifications. | table | - | .1.3.6.1.4.1.39003.3.2.7.17 |
| sub10UnitMgmtSnmpTraps If set to 'enabled' the agent will forward traps to all configured
trap destinations. If disabled traps are discarded.
Traps are not sent if sub10UnitMgmtSnmpAgent is 'disabled(2)… | scalar | Sub10State | .1.3.6.1.4.1.39003.3.2.7.2 |
| sub10UnitMgmtSnmpv320Mib If set to 'enabled' the agent will support the Sub10 Systems
v320 legacy MIB (LIBERATOR-MIB) objects and traps. | scalar | Sub10State | .1.3.6.1.4.1.39003.3.2.7.3 |
| sub10UnitMgmtSnmpv3 If set to 'enabled' the agent will support SNMPv3
PDUs and the SNMPv3 MIB configuration. This can be set to enabled or
disabled independently of the object sub10UnitMgmtSnmpAgent … | scalar | Sub10State | .1.3.6.1.4.1.39003.3.2.7.4 |
| sub10UnitMgmtSnmpTrpDstTable The table listing the each trap destination the local unit.
Each trap destination has an IpAddress and a trap community string | table | - | .1.3.6.1.4.1.39003.3.2.7.5 |
| sub10UnitMgmtSnmpEngineIdFormat The format of this SNMP v3 agent's engine id. The engine id is administratively
defined and is between 5 and 32 characters long and can be based on a number
of formats defined her… | scalar | Enumeration | .1.3.6.1.4.1.39003.3.2.7.6 |
| sub10UnitMgmtSnmpEngineIdText When sub10UnitMgmtSnmpEngineIdFormat='textString(4)' this object contains the administratively defined
string used to build the SNMP v3 engine id in sub10UnitMgmtSnmpEngineId. | scalar | OctetString | .1.3.6.1.4.1.39003.3.2.7.7 |
| sub10UnitMgmtSnmpEngineId The administratively assigned SNMP v3 engine id. The construction of the
engine id is dependant on the setting of sub10UnitMgmtSnmpEngineIdFormat and
must be unique to the unit. | scalar | OctetString | .1.3.6.1.4.1.39003.3.2.7.8 |
| sub10UnitMgmtSnmpOperAuthProto The authentication protocol currently assigned to users of group type operation. | scalar | Sub10Snmpv3AuthProtocol | .1.3.6.1.4.1.39003.3.2.7.9 |