powerSystemElevation
SP2-MIB ·
.1.3.6.1.4.1.12148.10.2.14
Object
A part of the systems global positioning data. This is the sites height above sealevel in Meters. The Elevation together with Latituse and Longitude is used for automagically placing system icons on NMS/Sitemonitors system that support this.
Context
- MIB
- SP2-MIB
- OID
.1.3.6.1.4.1.12148.10.2.14- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- powerSystem
- Siblings
- 17
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| powerSystemStatus A status value showing the overall condition of the power system. | scalar | Enumeration | .1.3.6.1.4.1.12148.10.2.1 |
| powerSystemLongitude A part of the systems global positioning data. The range +-180degrees
Longitude lines are imaginary lines running from the north pole to the south pole.
Longitudes are usually (W… | scalar | Integer32 | .1.3.6.1.4.1.12148.10.2.10 |
| powerSystemLongitudeDecimal The decimal part of dcSystemLatitude contains up to 7digits. This number is
in 1/1000000 degree fractions or 0,0000001 degree. A part of the systems global
positioning data. Lon… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12148.10.2.11 |
| powerSystemLatitude A part of the systems global positioning data. The latitude gives the location of a place
on Earth (or other planetary body) north or south of the equator. Lines of Latitude has … | scalar | Integer32 | .1.3.6.1.4.1.12148.10.2.12 |
| powerSystemLatitudeDecimal The decimal part of dcSystemLatitude contains up to 7digits. This number is
in 1/1000000 degree fractions or 0,0000001 degree. A part of the systems global
positioning data.
Lin… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12148.10.2.13 |
| powerSystemCurrentDecimalSetting A global flag telling if the current values in the system is Amperes or DeciAmpres | scalar | Enumeration | .1.3.6.1.4.1.12148.10.2.15 |
| powerSystemTemperatureScale A flag telling if the temperatures values in the system is of Celcius or Fahrenheit type | scalar | Enumeration | .1.3.6.1.4.1.12148.10.2.16 |
| powerSystemCapacityScale A flag telling if the system's battery capacity value is a percentage
of a fully charged battery, or in AmpereHours | scalar | Enumeration | .1.3.6.1.4.1.12148.10.2.17 |
| powerSystemEnergySource Show the energy source that currently powering the system. | scalar | Enumeration | .1.3.6.1.4.1.12148.10.2.18 |
| powerSystemType A value showing the type of the power system, which is named after the main controller. | scalar | Enumeration | .1.3.6.1.4.1.12148.10.2.2 |
| powerSystemMode A summary status showing if the system is in test, boost, float, equalize, emergency or start-up delay mode | scalar | Enumeration | .1.3.6.1.4.1.12148.10.2.3 |
| powerSystemCompany The Copmany name (as stored in the Control Unit). | scalar | OctetString | .1.3.6.1.4.1.12148.10.2.4 |
| powerSystemSite The system/site Location details (as stored in the Control Unit). | scalar | OctetString | .1.3.6.1.4.1.12148.10.2.5 |
| powerSystemModel The model/part number of the power system (as stored in the Control Unit). | scalar | OctetString | .1.3.6.1.4.1.12148.10.2.6 |
| powerSystemSerialNumber The serial number for the complete system. | scalar | OctetString | .1.3.6.1.4.1.12148.10.2.7 |
| powerSystemInstallDate The system's Installation date (as stored in the Control Unit). | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.12148.10.2.8 |
| powerSystemNominalVoltage The nominal voltage rating. 12V/24V/48V/60V/110V/220V/380V etc. systems. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12148.10.2.9 |