batteryTemperatures
SP2-MIB ·
.1.3.6.1.4.1.12148.10.10.7
Object
node
No description available.
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| batteryStatus A toplevel status for the battery subsystem. The state of this reflects the status of all
underlying statuses for the battery. Any change in one of the 'data monitors' in
the b… | scalar | Enumeration | .1.3.6.1.4.1.12148.10.10.1 |
| batteryUsedCapacity | node | - | .1.3.6.1.4.1.12148.10.10.10 |
| batteryTotalCapacity | node | - | .1.3.6.1.4.1.12148.10.10.11 |
| batteryQuality | node | - | .1.3.6.1.4.1.12148.10.10.12 |
| batteryLVBD | node | - | .1.3.6.1.4.1.12148.10.10.13 |
| batteryChargeCurrentLimit | node | - | .1.3.6.1.4.1.12148.10.10.14 |
| batteryBoost | node | - | .1.3.6.1.4.1.12148.10.10.15 |
| batteryTest | node | - | .1.3.6.1.4.1.12148.10.10.16 |
| batteryTempComp | node | - | .1.3.6.1.4.1.12148.10.10.17 |
| batteryBank | node | - | .1.3.6.1.4.1.12148.10.10.18 |
| batteryMonitors | node | - | .1.3.6.1.4.1.12148.10.10.19 |
| batteryDescription A descriptive name of the battery installed in the system. | scalar | OctetString | .1.3.6.1.4.1.12148.10.10.2 |
| batteryEnergyLog | node | - | .1.3.6.1.4.1.12148.10.10.20 |
| batteryCycleLog | node | - | .1.3.6.1.4.1.12148.10.10.21 |
| batteryEqualize | node | - | .1.3.6.1.4.1.12148.10.10.22 |
| batteryAhCharged | node | - | .1.3.6.1.4.1.12148.10.10.23 |
| batteryAhDischarged | node | - | .1.3.6.1.4.1.12148.10.10.24 |
| batteryRunTimeLog | node | - | .1.3.6.1.4.1.12148.10.10.25 |
| batteryModule | node | - | .1.3.6.1.4.1.12148.10.10.26 |
| batteryReferenceVoltage The Voltage at which the DC System float charges.
Acts as reference voltage when running temperature compensated charging. | scalar | Integer32 | .1.3.6.1.4.1.12148.10.10.3 |
| batteryFusesStatus The state of the battery fuses/breakers can mainly be normal(1) or majorAlarm(3) and
some other rarely used values . | scalar | Enumeration | .1.3.6.1.4.1.12148.10.10.4 |
| batteryVoltage | node | - | .1.3.6.1.4.1.12148.10.10.5 |
| batteryCurrents | node | - | .1.3.6.1.4.1.12148.10.10.6 |
| batteryTimeLeft | node | - | .1.3.6.1.4.1.12148.10.10.8 |
| batteryRemainingCapacity | node | - | .1.3.6.1.4.1.12148.10.10.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| batteryTemperaturesStatus The state of the battery fuses/breakers can be either one of the defined enumerated values | scalar | Enumeration | .1.3.6.1.4.1.12148.10.10.7.1 |
| batteryTemperaturesDescription A textual description of the battery temperature monitor. This is stored in the system controller
and can be changed by the user. | scalar | OctetString | .1.3.6.1.4.1.12148.10.10.7.2 |
| batteryTemperaturesTrapRepeatCounter The number of consecutive times this alamcondition has been transmitted in a trap.
When trap repetition is enabled, this counter increments every time this trap is repeated.
Th… | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.12148.10.10.7.3 |
| batteryTemperaturesAlarmEnable This value once enabled, the alarm condition of the monitor will be reported. | scalar | Enumeration | .1.3.6.1.4.1.12148.10.10.7.4 |
| batteryTemperaturesValue The highest value of the enabled battery temperature measurements.
Depending on the global setting in the Control unit, this value will be presented in Celsius
or Fahrenheit. | scalar | Integer32 | .1.3.6.1.4.1.12148.10.10.7.5 |
| batteryTemperaturesMajorHighLevel The major high alarm limit | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12148.10.10.7.6 |
| batteryTemperaturesMinorHighLevel The minor high alarm limit | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12148.10.10.7.7 |
| batteryTemperaturesMinorLowLevel The minor low alarm limit | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12148.10.10.7.8 |
| batteryTemperaturesMajorLowLevel The major low alarm limit | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12148.10.10.7.9 |