upsAlarmShutdownImminent
SOCOMECUPS-MIB ·
.1.3.6.1.4.1.4555.1.1.1.1.6.3.23
Object
scalar
mandatory
Integer32
The UPS will turn off power to the load in less than 5 seconds; this may be either a timed shutdown or a low battery shutdown.
Context
- MIB
- SOCOMECUPS-MIB
- OID
.1.3.6.1.4.1.4555.1.1.1.1.6.3.23- Type
- scalar
- Access
- readonly
- Status
- mandatory
- Parent
- upsWellKnownAlarms
- Siblings
- 86
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| upsAlarmBatteryBad mandatory One or more batteries have been determined to require
replacement. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.1 |
| upsAlarmBypassBad mandatory Bypass input supply is detected as absent. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.10 |
| upsAlarmOutputOffAsRequested mandatory The UPS has shutdown as requested, i.e., the output is off. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.11 |
| upsAlarmUpsOffAsRequested mandatory The entire UPS has shutdown as commanded. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.12 |
| upsAlarmChargerFailed mandatory An uncorrected problem has been detected within the
UPS charger subsystem. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.13 |
| upsAlarmUpsOutputOff mandatory The output of the UPS is in the off state. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.14 |
| upsAlarmUpsSystemOff mandatory The UPS system is in the off state. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.15 |
| upsAlarmFanFailure mandatory The failure of one or more fans in the UPS has been detected. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.16 |
| upsAlarmFuseFailure mandatory The failure of one or more fuses has been detected. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.17 |
| upsAlarmGeneralFault mandatory A general fault in the UPS has been detected. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.18 |
| upsAlarmDiagnosticTestFailed mandatory The result of the last diagnostic test indicates a failure. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.19 |
| upsAlarmOnBattery mandatory The UPS is drawing power from the batteries. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.2 |
| upsAlarmCommunicationLost mandatory A problem has been encountered in the
communications between the agent and the UPS. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.20 |
| upsAlarmAwaitingPower mandatory The UPS output is off and the UPS is awaiting the
return of input power. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.21 |
| upsAlarmShutdownPending mandatory A upsShutdownAfterDelay countdown is underway. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.22 |
| upsAlarmTestInProgress mandatory A test is in progress, as initiated and indicated by
the Test Group. Tests initiated via other
implementation-specific mechanisms can indicate the
presence of the testing in the … | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.24 |
| upsAlarmPowerSupplyFault mandatory Digital power supply fault. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.25 |
| upsAlarmAuxMainFail mandatory Bypass input supply is out of tolerance. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.26 |
| upsAlarmManualBypassClose mandatory The maintenance bypass breaker is closed | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.27 |
| upsAlarmShortCircuit mandatory Short Circuit on UPS output. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.28 |
| upsAlarmBatteryChargerFailure mandatory Battery charger failure. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.29 |
| upsAlarmLowBattery mandatory The remaining battery run-time is less than or equal
to battery low threshold | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.3 |
| upsAlarmInverterOverCurrent mandatory Inverter Over-current. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.30 |
| upsAlarmInverterDistorsion mandatory Excessive Inverter Distorsion. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.31 |
| upsAlarmPrechargeVoltageFail mandatory Precharge voltage out of tolerance. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.32 |
| upsAlarmBoostTooLow mandatory Boost output voltage too low. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.33 |
| upsAlarmBoostTooHigh mandatory Boost output voltage too high. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.34 |
| upsAlarmBatteryTooHigh mandatory Battery voltage too high. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.35 |
| upsAlarmImproperCondition mandatory Improper condition of use | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.36 |
| upsAlarmOverloadTimeout mandatory Overload timeout blocking Inverter. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.37 |
| upsAlarmControlSystemFailure mandatory Microprocessor control system failure | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.38 |
| upsAlarmDataCorrupted mandatory Configuration data map corrupted. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.39 |
| upsAlarmDepletedBattery mandatory The UPS will be unable to sustain the present load
when and if the utility power is lost. The Battery is discharched. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.4 |
| upsAlarmPllFault mandatory Pll fault. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.40 |
| upsAlarmInputGeneralAlarm mandatory Rectifier input supply out of tolorances or absent. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.41 |
| upsAlarmRectifierGeneralAlarm mandatory Rectifier general alarm. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.42 |
| upsAlarmBoostGeneralAlarm mandatory Boost general alarm. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.43 |
| upsAlarmInverterGeneralAlarm mandatory Inverter general alarm. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.44 |
| upsAlarmBatteryGeneralAlarm mandatory Battery charger general alarm. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.45 |
| upsAlarmOutputOver mandatory Output voltage over limit. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.46 |
| upsAlarmOutputUnder mandatory Output voltage under limit. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.47 |
| upsAlarmBypassGeneralAlarm mandatory Bypass general alarm. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.48 |
| upsAlarmStopForOverload mandatory Stop for overload. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.49 |
| upsAlarmTempBad mandatory UPS temperature is out of tolerance. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.5 |
| upsAlarmImminentStop mandatory UPS imminent stop | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.50 |
| upsAlarmModule1Alarm mandatory Module 1 in parallel general alarm. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.51 |
| upsAlarmModule2Alarm mandatory Module 2 in parallel general alarm. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.52 |
| upsAlarmModule3Alarm mandatory Module 3 in parallel general alarm. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.53 |
| upsAlarmModule4Alarm mandatory Module 4 in parallel general alarm. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.54 |
| upsAlarmModule5Alarm mandatory Module 5 in parallel general alarm. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.55 |
| upsAlarmModule6Alarm mandatory Module 6 in parallel general alarm. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.56 |
| upsAlarmExternalAlarm1 mandatory External Alarm 1. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.57 |
| upsAlarmExternalAlarm2 mandatory External Alarm 2. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.58 |
| upsAlarmExternalAlarm3 mandatory External Alarm 3. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.59 |
| upsAlarmInputBad mandatory Input power supply is out of tolerance. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.6 |
| upsAlarmExternalAlarm4 mandatory External Alarm 4. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.60 |
| upsAlarmEService mandatory Remote Service Alarm | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.61 |
| upsAlarmRedundancyLost mandatory Redundancy lost | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.62 |
| upsAlarmPeriodicServiceCheck mandatory Periodic service check up. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.63 |
| upsAlarmAllTransferDisabled mandatory Automatic and manual transfer disabled | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.64 |
| upsAlarmAutoTransferDisabled mandatory Automatic transfer disabled | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.65 |
| upsAlarmBatteryRoom mandatory Battery room alarm | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.66 |
| upsAlarmManualBypass mandatory Maintenance bypass alarm | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.67 |
| upsAlarmBatteryDischarged mandatory Battery Discharged | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.68 |
| upsAlarmInsufficientResources mandatory Insufficient resources | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.69 |
| upsAlarmOutputBad mandatory An output condition (other than OutputOverload) is
out of tolerance. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.7 |
| upsAlarmOptionalBoards mandatory Optional boards general alarm | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.70 |
| upsAlarmRectifierFault mandatory Rectifier fault | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.71 |
| upsAlarmBoostFault mandatory Boost fault | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.72 |
| upsAlarmInverterFault mandatory Inverter fault | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.73 |
| upsAlarmParallelModuleFault mandatory Parallel module fault | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.74 |
| upsAlarmGenSetGeneral mandatory Gen-set general alarm | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.75 |
| upsAlarmGenSetFault mandatory Gen-set fault | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.76 |
| upsAlarmEmergencyStopActive mandatory UPS power off active | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.77 |
| upsAlarmBatteryCircuitOpen mandatory Battery circuit open | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.78 |
| upsAlarmFansFailure mandatory Fans failure | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.79 |
| upsAlarmOutputOverload mandatory The output load exceeds the UPS output capacity. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.8 |
| upsAlarmPhaseRotationFault mandatory Phase rotation fault | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.80 |
| upsAlarmBypassFault mandatory Bypass fault | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.81 |
| upsAlarmA63 mandatory A63. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.82 |
| upsAlarmModule7Alarm mandatory Module 7 in parallel general alarm. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.83 |
| upsAlarmModule8Alarm mandatory Module 8 in parallel general alarm. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.84 |
| upsAlarmBatteryTemperature mandatory Battery Temperature Alarm. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.85 |
| upsAlarmRecRedundancy mandatory Rectifier Redundancy Alarm. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.86 |
| upsAlarmInvRedundancy mandatory Inverter Redundancy Alarm. | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.87 |
| upsAlarmOnBypass mandatory Load supplied by bypass | scalar | Integer32 | .1.3.6.1.4.1.4555.1.1.1.1.6.3.9 |