sleMplsQosClassMapCtrlMatchCriteria

SLE-MLSQOS-MIB · .1.3.6.1.4.1.6296.101.28.4.2.23
MIB view Table view

Object

scalar r/w Enumeration 
This object is used to set the 
Class map match criteria,  to map the matchAll or MatchAny 
for HQS.

Context

MIB
SLE-MLSQOS-MIB
OID
.1.3.6.1.4.1.6296.101.28.4.2.23
Type
scalar
Access
readwrite
Status
current
Parent
sleMlsQosClassMapControl
Siblings
22

Syntax

Enumeration

Values & Constraints

Enumerated Values
1matchAll
2matchAny

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
sleMlsQosClassMapControlRequest
the configuration commands, and user can configure functions via setting this entry as proper value.
scalarEnumeration.1.3.6.1.4.1.6296.101.28.4.2.1
sleMlsQosClassMapCtrlMatchRangeLow
Class Map match Value: Low
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.101.28.4.2.10
sleMlsQosClassMapCtrlMatchRangeHigh
Class Map match Value : High
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.101.28.4.2.11
sleMlsQosClassMapCtrlMatchEtherType
Class map Match criteria : Eth Type
scalarOctetString.1.3.6.1.4.1.6296.101.28.4.2.12
sleMlsQosClassMapCtrlMatchSrcType
Class Map Src Type 1. IPv4 2. IPv6 3. Mac
scalarEnumeration.1.3.6.1.4.1.6296.101.28.4.2.13
sleMlsQosClassMapCtrlMatchSrcAddr
Class map Match criteria : Src Address. It can be IPV4 / IPV6 / MAC
scalarOctetString.1.3.6.1.4.1.6296.101.28.4.2.14
sleMlsQosClassMapCtrlMatchDstAddr
Class map Match criteria : dst Ip Address it can be IPV4 / IPV6 / MAC
scalarOctetString.1.3.6.1.4.1.6296.101.28.4.2.15
sleMlsQosClassMapCtrlMatchSrcIpMaskLen
Class map Match criteria : Src Ip Mask Length
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.101.28.4.2.16
sleMlsQosClassMapCtrlMatchDstIpMaskLen
Class map Match criteria : Dst Ip Mask Length
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.101.28.4.2.17
sleMlsQosClassMapCtrlMatchSrcMacMask
Class map Match criteria : Src MAC Addr Mask
scalarOctetString.1.3.6.1.4.1.6296.101.28.4.2.18
sleMlsQosClassMapCtrlMatchDstMacMask
Class map Match criteria : Dst MAC Addr Mask
scalarOctetString.1.3.6.1.4.1.6296.101.28.4.2.19
sleMlsQosClassMapControlStatus
status of user command. User have to check this value as .busy. or .idle. before do setRequest.
scalarSLE-TC-MIBSleControlStatusType.1.3.6.1.4.1.6296.101.28.4.2.2
sleMlsQosClassMapCtrlMatchAcessGroup
Class map Match criteria : ACL Group List
scalarOctetString.1.3.6.1.4.1.6296.101.28.4.2.20
sleMlsQosClassMapCtrlMatchVlanTpid
Class map Match criteria : vlan TDID
scalarOctetString.1.3.6.1.4.1.6296.101.28.4.2.21
sleMlsQosClassMapCtrlMatchEgressInterface
Class map Match criteria : egress interface. This can be CPU, interface Name, Vlan Interface
scalarOctetString.1.3.6.1.4.1.6296.101.28.4.2.22
sleMlsQosClassMapControlTimer
the wait-time until setRequest end. In case of short-time command, this value is 0
scalarSNMPv2-SMIGauge32.1.3.6.1.4.1.6296.101.28.4.2.3
sleMlsQosClassMapontrolTimeStamp
the time stamp of the last command. (don.t care)
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.6296.101.28.4.2.4
sleMlsQosClassMapControlReqResult
Result of the last command.
scalarSLE-TC-MIBSleControlRequestResultType.1.3.6.1.4.1.6296.101.28.4.2.5
sleMlsQosClassMapCtrlName
Class Map name
scalarOctetString.1.3.6.1.4.1.6296.101.28.4.2.6
sleMlsQosClassMapCtrlMatchType
Class Map Type cos (1) , innerCos(2), ipDscp (3), ipPrecedence (4), ip6Dscp (5), ip6Precedence (6), tcpSrcPort (7), tcpDstPort (8), udpSrcPort (9), udpDstPort (10), VlanId (11), i…
scalarClassMapMatchType.1.3.6.1.4.1.6296.101.28.4.2.7
sleMlsQosClassMapCtrlMatchVal
Class Map match Value
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.101.28.4.2.8
sleMlsQosClassMapCtrlMatchRangeType
Class Map Type tcpSrcPort (1), tcpDstPort (2), udpSrcPort (3), udpDstPort (4), VlanId (5), layer4SrcPort (6), layer4DstPort (7)
scalarClassMapMatchRangeType.1.3.6.1.4.1.6296.101.28.4.2.9