SLE-MLSQOS-MIB Table View

Police index

Police Name

Traffic Rate configured for the Aggregate police profile

Burst Size configured for the Aggregate police profile

Index for the table.
This is a running index number, which will be generated internally

Filter Index for the table.
This is a running index number, which will be generated internally

Access Control List Num.
<1-99> standard access list
<100-199> extended access list
<1300-1999> standard access list (expanded range)
<2000-2699> extended access list (expanded range)
<WORD> Name of the acces…

ACL MATCH Type
mac (1),
EthType(2),
l3Proto (3)

ACL Actions
deny(0) deny the packets
permit(1) permit.
remark(2) mark the packets

ACL ethertype to be matched.
ip4(0) ipv4 packets
ip6(1) ipv6 packets.
mpls(3) mpls packets

ACL protocols to be matched.
0-255 : IANA protocol numbers
256 - any
Some important protocol Numbers
GRE - 47
IGMP -2
IPV4 - 4
IPComp - 108
OSPF - 89
RSVP - 46
PIM - 103
VRRP - 112

Src Ip Address

DST Address

SRC Address Mask

DST Address Mask

Src MAC Address

DST MAC Address

SRC Address Mask

DST Address Mask

TCP/UDP Src port action
0 - no-action
1 - equal
2 - not-equal
3 - less-than
4 - Greater-than
5 - Range

TCP/UDP Dst port action
0 - no-action
1 - equal
2 - not-equal
3 - less-than
4 - Greater-than
5 - Range

TCP/UDP Src port .

TCP/UDP Dst port .

Exact Match

Remark Description

The object is used to display the ICMP type of control message

Description Type Code
echo-reply 0 …

The object is used to display the ICMP code of control message

Description Type Code
echo-reply 0 0
net-unre…

End port for TCP/UDP source port range.

End port for TCP/UDP destination port range.

Index for the table. Class Map name

Class map Match criteria : Cos value

Class map Match criteria : Inner Cos value

Class map Match criteria : Engress Interface

Class map Match criteria : Eth Type

Class map Match criteria : Src Ip Address

Class map Match criteria : dst Ip Address

Class map Match criteria : Src Ip Mask Length

Class map Match criteria : Dst Ip Mask Length

Class map Match criteria : Src Ip Address

Class map Match criteria : dst Ip Address

Class map Match criteria : Src Ip Mask Length

Class map Match criteria : Dst Ip Mask Length

Class map Match criteria : DSCP value

Class map Match criteria : Ip Precedence

Class map Match criteria : Ip6 DSCP value

Class map Match criteria : ip6 Precedence value

Class map Match criteria : TCP src Port

Class map Match criteria : TCP Dst Port

Class map Match criteria : TCP src Port Range

Class map Match criteria : TCP Dst Port Range

Class map Match criteria : UDP src Port

Class map Match criteria : UDP Dst Port

Class map Match criteria : UDP src Port

Class map Match criteria : UDP Dst Port

Class map Match criteria : Src MAC Addr

Class map Match criteria : Src MAC Addr Mask

Class map Match criteria : Dst MAC Addr

Class map Match criteria : Dst MAC Addr Mask

Class map Match criteria : Vlan Id

Class map Match criteria : Vlan Id Range

Class map Match criteria : Inner Vlan Id

Class map Match criteria : Vlan TPID

Class map Match criteria : Acl Name

Class map Match criteria : Layer4 Any Src Port

Class map Match criteria : Layer4 Any Dst Port

Class map Match criteria : Layer4 Any src Port range

Class map Match criteria : Layer4 Any Dst Port range

This object is used to set the
Class map match criteria, to map the matchAll or MatchAny
for HQS.

Policy Map name

Class map Name

Priority
low(0)
medium(1)
high(2)
highest(3)

Operation Mode

Police Type
srtcm(1)
trtcm(2)

Police CIR (committed ingress rate) value

Police PIR (peak ingress rate) value

Police CBS (committed burst size) value

Police EBS (Excess burst size) value

Exceed Action Type
none (0)
drop (1)
set-dscp-transmit (2)
set-tos-transmit (3)
set-cos-transmit (4)
transmit (7)

Exceed Action COS

Exceed Action DSCP

Exceed Action TOS

Violate Action Type
none(0)
drop(1)
set-dscp-transmit(2)
set-cos-transmit(3)
set-tos-transmit(4)
transmit(5)

Violate Action Value

Agrregate Police name:

Action Type: deny

Cos value

cpy Cos value.

Ip DSCP value .

Ip6 DSCP value to be set.

Ip precedence value to be set.

Ip6 precedence value to be set.

Mirror to Port value.

redirect to Port value.

Vlan Id value.

Vlan COS value

Heirarchical qos policy-map qos-group.
Max range is 1 to 2000.

Internal Queue Priority.

Copy to CPU.

This Index is based on Max entries i.e. 64 (dscp)

Index for the table. Interface Name

Interface trust state
none (0)
cos (1)
dscp (2)

Interface Cos value

Interface Cos override value

Interface Cos to cos mapping

Interface Cos to queue mapping

Interface DSCP values

Interface dscp to dscp mapping

Interface dscp to queue mapping

Interface exp to exp mapping

Interface Traffic Shaping rate

Interface traffic shaping burst

Interface policy map mapping

Interface trust pass-through COS enabled

Interface trust pass-through DSCP enabled

Interface cos to class mapping in no truct mode
It represnet COS <VALUE> - CNG <VALUE> - CLASS <VALUE>

Interface dscp to class mapping in no truct mode
It represnet DSCP <VALUE> - CLASS <VALUE>

To rewite the dscp/cos at egress in uniform mode.

Interface traffic IFG exclude
0 - No
1 - Yes

Interface traffic policing rate
<8-1000000> in kbps

Interface traffic policing burst
<2-2000>

This Index is based on no of Queues

This Index is based on no of Queues

Interface Queue Shape rate

Interface Queue WRR queue weight

Interface Queue WRR random detect min threshold

Interface Queue WRR random detect max threshold

Interface Queue WRR random detect exp weight

Interface Queue TailDrop threshold

Interface Strict Queue Config

WRR Random Detect Drop Start

WRR Random Detect Drop Slope

WRR Random Detect Color

Interface Queue Shape rate (minimum)

Index for the table. QStats Name

This Index is based on Max entries i.e. 64 (dscp)

Wred Green drop packet counter

Wred yellow drop packet counter

Wred red drop packet counter

Taildrop drop packet counter

Taildrop drop bytes counter

Total out packets in the Queue

Total out bytes in the Queue

Total mcast out packets in the Queue

Total mcast out bytes in the Queue

Total drop packets in the Queue

Total drop bytes in the Queue

Total mcast drop packets in the Queue

Total mcast drop bytes in the Queue

Total Enqueued packets in the Queue

Total Enqueued bytes in the Queue

Class Map queue name.

An unique object identify an entry of this table.

This object is used to show the match group of the class map
queueing.

This object identify an entry in this table.

This object is used to show the shape for the policy map queue
Types:
1)average 1-1000000000(bps|kbps|mbps|gbps)
2)percent 1-100

This object is used to show the bandwidth for the policy map queue
average 1-1000000000(bps|kbps|mbps|gbps)
percent 1-100

This object is used to show the remained bandwidth for the policy map queue

This object is used to show the queue limit for the policy map queue

This object is used to show the service name for the policy map queue

This object is used to show the priority for the policy map queue
Always value is 1

This object is used to show the random detuct minimum threshold for the
policy map queue

This object is used to show the random detuct maximum threshold for the
policy map queue