sleMlsQosInterfaceCtrlMapingType

SLE-MLSQOS-MIB · .1.3.6.1.4.1.6296.101.28.6.2.7
MIB view Table view

Object

scalar r/w MlsQosInterfaceMapingType 
Mapping Type:
cos (1)          Configure interface default CoS values
cos-cos (2)      Specify cos-cos
cos-queue (3)    Specify cos-queue map
dscp (4)         Set the default DSCP vlaue
dscp-dscp(5)     Specify dscp-dscp
dscp-queue (6)   DSCP-to-QUEUE
exp-exp(7)  	   Specify exp-exp
trust  (8)   	   Configure port trust state
trust-passthrough (9)     COnfigure port trust pass-through state
 cosToClass (10)			configure cos to class
dscpToClass (11)			configure dscp to class

Context

MIB
SLE-MLSQOS-MIB
OID
.1.3.6.1.4.1.6296.101.28.6.2.7
Type
scalar
Access
readwrite
Status
current
Parent
sleMlsQosInterfaceControl
Siblings
17

Syntax

MlsQosInterfaceMapingType
Source
MlsQosInterfaceMapingType
Base type
Enumeration

Values & Constraints

Type Values
1cos
2cosToCos
3cosToQueue
4dscp
5dscpToDscp
6dscpToQueue
7expToExp
8trust
9trustPassThrough
10cosToClass
11dscpToClass

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
sleMlsQosInterfaceControlRequest
the configuration commands, and user can configure functions via setting this entry as proper value.
scalarEnumeration.1.3.6.1.4.1.6296.101.28.6.2.1
sleMlsQosInterfaceCtrlMapingCosOverride
Interface COS override value
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.101.28.6.2.10
sleMlsQosInterfaceCtrlMapingTrustState
Interface trust state Trust: cos (1) dscp (2) Trust pass-through: pass-through cos (1) pass-through dscp (2)
scalarMlsQosIntfTrustState.1.3.6.1.4.1.6296.101.28.6.2.11
sleMlsQosInterfaceCtrlTrafficShapeRate
Interface Traffic shape rate
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.101.28.6.2.12
sleMlsQosInterfaceCtrlTrafficShapeBurst
Interface Traffic shape burst
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.101.28.6.2.13
sleMlsQosInterfaceCtrlInputPolicyMap
Interface Policy Map mapping
scalarOctetString.1.3.6.1.4.1.6296.101.28.6.2.14
sleMlsQosInterfaceCtrlOutputPolicyMapscalarOctetString.1.3.6.1.4.1.6296.101.28.6.2.15
sleMlsQosInterfaceCtrlMapingCNGValue
Specify CNG value <0-1>
scalarInteger32.1.3.6.1.4.1.6296.101.28.6.2.16
sleMlsQosInterfaceCtrlMapingEgrClassValscalarOctetString.1.3.6.1.4.1.6296.101.28.6.2.17
sleMlsQosInterfaceCtrlReplace
rewite the dscp/cos at egress in uniform mode.
scalarEnumeration.1.3.6.1.4.1.6296.101.28.6.2.18
sleMlsQosInterfaceControlStatus
status of user command. User have to check this value as .busy. or .idle. before do setRequest.
scalarSLE-TC-MIBSleControlStatusType.1.3.6.1.4.1.6296.101.28.6.2.2
sleMlsQosInterfaceControlTimer
the wait-time until setRequest end. In case of short-time command, this value is 0
scalarSNMPv2-SMIGauge32.1.3.6.1.4.1.6296.101.28.6.2.3
sleMlsQosInterfaceontrolTimeStamp
the time stamp of the last command. (don.t care)
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.6296.101.28.6.2.4
sleMlsQosInterfaceControlReqResult
Result of the last command.
scalarSLE-TC-MIBSleControlRequestResultType.1.3.6.1.4.1.6296.101.28.6.2.5
sleMlsQosInterfaceCtrlIndex
Class map Name
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.101.28.6.2.6
sleMlsQosInterfaceCtrlMapingIngVal
Ingress or incoming mapping values. Based on sleMlsQosInterfaceCtrlMapingType, this value has to be set. Ex. If sleMlsQosInterfaceCtrlMapingType = cosToCos, then sleMlsQosInter…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.101.28.6.2.8
sleMlsQosInterfaceCtrlMapingEgrVal
Egress or outgoing mapping values. Based on sleMlsQosInterfaceCtrlMapingType, this value has to be set. Ex. If sleMlsQosInterfaceCtrlMapingType = cosToCos, then sleMlsQosInterf…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.101.28.6.2.9