sleMlsQosInterfaceControlRequest
SLE-MLSQOS-MIB ·
.1.3.6.1.4.1.6296.101.28.6.2.1
Object
scalar
r/w
Enumeration
the configuration commands, and user can configure functions via setting this entry as proper value.
Context
- MIB
- SLE-MLSQOS-MIB
- OID
.1.3.6.1.4.1.6296.101.28.6.2.1- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- sleMlsQosInterfaceControl
- Siblings
- 17
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | setInterfaceQosMapping |
2 | unSetInterfaceQosMapping |
3 | setInterfaceTrafficShaping |
4 | unSetInterfaceTrafficShaping |
5 | setInterfaceInputPolicyMap |
6 | unSetInterfaceInputPolicyMap |
7 | setInterfaceOutputPolicyMap |
8 | unSetInterfaceOutputPolicyMap |
9 | setInterfaceOveride |
10 | unsetInterfaceOveride |
11 | setInterfaceReplace |
12 | unsetInterfaceReplace |
13 | setInterfaceTrafficIfgExclude |
14 | unsetInterfaceTrafficIfgExclude |
15 | setInterfaceTrafficPolicingDot3x |
16 | unsetInterfaceTrafficPolicingDot3x |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sleMlsQosInterfaceCtrlMapingCosOverride Interface COS override value | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.28.6.2.10 |
| sleMlsQosInterfaceCtrlMapingTrustState Interface trust state
Trust:
cos (1)
dscp (2)
Trust pass-through:
pass-through cos (1)
pass-through dscp (2) | scalar | MlsQosIntfTrustState | .1.3.6.1.4.1.6296.101.28.6.2.11 |
| sleMlsQosInterfaceCtrlTrafficShapeRate Interface Traffic shape rate | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.28.6.2.12 |
| sleMlsQosInterfaceCtrlTrafficShapeBurst Interface Traffic shape burst | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.28.6.2.13 |
| sleMlsQosInterfaceCtrlInputPolicyMap Interface Policy Map mapping | scalar | OctetString | .1.3.6.1.4.1.6296.101.28.6.2.14 |
| sleMlsQosInterfaceCtrlOutputPolicyMap | scalar | OctetString | .1.3.6.1.4.1.6296.101.28.6.2.15 |
| sleMlsQosInterfaceCtrlMapingCNGValue Specify CNG value <0-1> | scalar | Integer32 | .1.3.6.1.4.1.6296.101.28.6.2.16 |
| sleMlsQosInterfaceCtrlMapingEgrClassVal | scalar | OctetString | .1.3.6.1.4.1.6296.101.28.6.2.17 |
| sleMlsQosInterfaceCtrlReplace rewite the dscp/cos at egress in uniform mode. | scalar | Enumeration | .1.3.6.1.4.1.6296.101.28.6.2.18 |
| sleMlsQosInterfaceControlStatus status of user command. User have to check this value as .busy. or .idle. before do setRequest. | scalar | SLE-TC-MIBSleControlStatusType | .1.3.6.1.4.1.6296.101.28.6.2.2 |
| sleMlsQosInterfaceControlTimer the wait-time until setRequest end. In case of short-time command, this value is 0 | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.6296.101.28.6.2.3 |
| sleMlsQosInterfaceontrolTimeStamp the time stamp of the last command. (don.t care) | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.6296.101.28.6.2.4 |
| sleMlsQosInterfaceControlReqResult Result of the last command. | scalar | SLE-TC-MIBSleControlRequestResultType | .1.3.6.1.4.1.6296.101.28.6.2.5 |
| sleMlsQosInterfaceCtrlIndex Class map Name | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.28.6.2.6 |
| sleMlsQosInterfaceCtrlMapingType Mapping Type:
cos (1) Configure interface default CoS values
cos-cos (2) Specify cos-cos
cos-queue (3) Specify cos-queue map
dscp (4) Set the default DSCP… | scalar | MlsQosInterfaceMapingType | .1.3.6.1.4.1.6296.101.28.6.2.7 |
| sleMlsQosInterfaceCtrlMapingIngVal Ingress or incoming mapping values.
Based on sleMlsQosInterfaceCtrlMapingType, this value has to be set.
Ex.
If sleMlsQosInterfaceCtrlMapingType = cosToCos, then
sleMlsQosInter… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.28.6.2.8 |
| sleMlsQosInterfaceCtrlMapingEgrVal Egress or outgoing mapping values.
Based on sleMlsQosInterfaceCtrlMapingType, this value has to be set.
Ex.
If sleMlsQosInterfaceCtrlMapingType = cosToCos, then
sleMlsQosInterf… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.28.6.2.9 |