sleMlsQosGlobalControlMappingEgrValue
SLE-MLSQOS-MIB ·
.1.3.6.1.4.1.6296.101.28.1.2.9
Object
Egress or outgoing mapping values. Based on sleMlsQosGlobalControlMappingType, this value has to be set. Ex. If sleMlsQosGlobalControlMappingType = cosToCos, then sleMlsQosGlobalControlMappingEgrValue = outgoing or egress COS value
Context
- MIB
- SLE-MLSQOS-MIB
- OID
.1.3.6.1.4.1.6296.101.28.1.2.9- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- sleMlsQosGlobalControl
- Siblings
- 14
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sleMlsQosGlobalControlRequest The configuration commands, and user can configure
functions via setting this entry as proper value. | scalar | Enumeration | .1.3.6.1.4.1.6296.101.28.1.2.1 |
| sleMlsQosGlobalControlQueueId Queue Id | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.28.1.2.10 |
| sleMlsQosGlobalControlWrrQueueWeight Queue weight for weighted round robin scheduling.
This value is set for the Queue Id configured via sleMlsQosGlobalControlQueueId | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.28.1.2.11 |
| sleMlsQosGlobalControlCpuMaxPpsRate Rate limiting for CPU. Defines Max packets per second to CPU
This value is set for the Queue Id configured via sleMlsQosGlobalControlQueueId | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.28.1.2.12 |
| sleMlsQosGlobalControlCpuQueueWt Weight for CPU Queue.
This value is set for the Queue Id configured via sleMlsQosGlobalControlQueueId | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.28.1.2.13 |
| sleMlsQosGlobalControlNodeId Node Id | scalar | Integer32 | .1.3.6.1.4.1.6296.101.28.1.2.14 |
| sleMlsQosGlobalControlMappingEgrClassValue Egress or outgoing mapping value is only for exp to class
Diffserv class alias, eg: be, ef, af11 etc.
If sleMlsQosGlobalControlMappingType is exp-to-class, this value has to be s… | scalar | OctetString | .1.3.6.1.4.1.6296.101.28.1.2.15 |
| sleMlsQosGlobalControlStatus status of user command. User have to check this value as .busy. or .idle. before do setRequest. | scalar | SLE-TC-MIBSleControlStatusType | .1.3.6.1.4.1.6296.101.28.1.2.2 |
| sleMlsQosGlobalCtrlTimer the wait-time until setRequest end. In case of short-time command, this value is 0 | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.6296.101.28.1.2.3 |
| sleMlsQosGlobalControlTimeStamp the time stamp of the last command. (don.t care) | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.6296.101.28.1.2.4 |
| sleMlsQosGlobalControlReqResult Result of the last command. | scalar | SLE-TC-MIBSleControlRequestResultType | .1.3.6.1.4.1.6296.101.28.1.2.5 |
| sleMlsQosCtrlGlobalStatus Enable / Disable MlQos
enable (1)
disable (0) | scalar | MlsQosStatusType | .1.3.6.1.4.1.6296.101.28.1.2.6 |
| sleMlsQosGlobalControlMappingType Below Mapping Types can be configured
cosToCos(1),
cosToQueue(2),
dscpToDscp(3),
dscpToQueue(4),
expToExp(5),
expToQueue(6)
expToClass(7) | scalar | MlsQosMappingType | .1.3.6.1.4.1.6296.101.28.1.2.7 |
| sleMlsQosGlobalControlMappingIngValue Ingress or incoming mapping values.
Based on sleMlsQosGlobalControlMappingType, this value has to be set.
Ex.
If sleMlsQosGlobalControlMappingType = cosToCos, then
sleMlsQosGlo… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.28.1.2.8 |