sleMlsQosClassMapCtrlMatchSrcAddr
SLE-MLSQOS-MIB ·
.1.3.6.1.4.1.6296.101.28.4.2.14
Object
scalar
r/w
OctetString
Class map Match criteria : Src Address. It can be IPV4 / IPV6 / MAC
Context
- MIB
- SLE-MLSQOS-MIB
- OID
.1.3.6.1.4.1.6296.101.28.4.2.14- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- sleMlsQosClassMapControl
- Siblings
- 22
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sleMlsQosClassMapControlRequest the configuration commands, and user can configure functions via setting this entry as proper value. | scalar | Enumeration | .1.3.6.1.4.1.6296.101.28.4.2.1 |
| sleMlsQosClassMapCtrlMatchRangeLow Class Map match Value: Low | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.28.4.2.10 |
| sleMlsQosClassMapCtrlMatchRangeHigh Class Map match Value : High | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.28.4.2.11 |
| sleMlsQosClassMapCtrlMatchEtherType Class map Match criteria : Eth Type | scalar | OctetString | .1.3.6.1.4.1.6296.101.28.4.2.12 |
| sleMlsQosClassMapCtrlMatchSrcType Class Map Src Type
1. IPv4
2. IPv6
3. Mac | scalar | Enumeration | .1.3.6.1.4.1.6296.101.28.4.2.13 |
| sleMlsQosClassMapCtrlMatchDstAddr Class map Match criteria : dst Ip Address
it can be IPV4 / IPV6 / MAC | scalar | OctetString | .1.3.6.1.4.1.6296.101.28.4.2.15 |
| sleMlsQosClassMapCtrlMatchSrcIpMaskLen Class map Match criteria : Src Ip Mask Length | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.28.4.2.16 |
| sleMlsQosClassMapCtrlMatchDstIpMaskLen Class map Match criteria : Dst Ip Mask Length | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.28.4.2.17 |
| sleMlsQosClassMapCtrlMatchSrcMacMask Class map Match criteria : Src MAC Addr Mask | scalar | OctetString | .1.3.6.1.4.1.6296.101.28.4.2.18 |
| sleMlsQosClassMapCtrlMatchDstMacMask Class map Match criteria : Dst MAC Addr Mask | scalar | OctetString | .1.3.6.1.4.1.6296.101.28.4.2.19 |
| sleMlsQosClassMapControlStatus status of user command. User have to check this value as .busy. or .idle. before do setRequest. | scalar | SLE-TC-MIBSleControlStatusType | .1.3.6.1.4.1.6296.101.28.4.2.2 |
| sleMlsQosClassMapCtrlMatchAcessGroup Class map Match criteria : ACL Group List | scalar | OctetString | .1.3.6.1.4.1.6296.101.28.4.2.20 |
| sleMlsQosClassMapCtrlMatchVlanTpid Class map Match criteria : vlan TDID | scalar | OctetString | .1.3.6.1.4.1.6296.101.28.4.2.21 |
| sleMlsQosClassMapCtrlMatchEgressInterface Class map Match criteria : egress interface.
This can be CPU, interface Name, Vlan Interface | scalar | OctetString | .1.3.6.1.4.1.6296.101.28.4.2.22 |
| sleMplsQosClassMapCtrlMatchCriteria This object is used to set the
Class map match criteria, to map the matchAll or MatchAny
for HQS. | scalar | Enumeration | .1.3.6.1.4.1.6296.101.28.4.2.23 |
| sleMlsQosClassMapControlTimer the wait-time until setRequest end. In case of short-time command, this value is 0 | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.6296.101.28.4.2.3 |
| sleMlsQosClassMapontrolTimeStamp the time stamp of the last command. (don.t care) | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.6296.101.28.4.2.4 |
| sleMlsQosClassMapControlReqResult Result of the last command. | scalar | SLE-TC-MIBSleControlRequestResultType | .1.3.6.1.4.1.6296.101.28.4.2.5 |
| sleMlsQosClassMapCtrlName Class Map name | scalar | OctetString | .1.3.6.1.4.1.6296.101.28.4.2.6 |
| sleMlsQosClassMapCtrlMatchType Class Map Type
cos (1) ,
innerCos(2),
ipDscp (3),
ipPrecedence (4),
ip6Dscp (5),
ip6Precedence (6),
tcpSrcPort (7),
tcpDstPort (8),
udpSrcPort (9),
udpDstPort (10),
VlanId (11),
i… | scalar | ClassMapMatchType | .1.3.6.1.4.1.6296.101.28.4.2.7 |
| sleMlsQosClassMapCtrlMatchVal Class Map match Value | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.28.4.2.8 |
| sleMlsQosClassMapCtrlMatchRangeType Class Map Type
tcpSrcPort (1),
tcpDstPort (2),
udpSrcPort (3),
udpDstPort (4),
VlanId (5),
layer4SrcPort (6),
layer4DstPort (7) | scalar | ClassMapMatchRangeType | .1.3.6.1.4.1.6296.101.28.4.2.9 |