sleMlsQosACLCtrlL3Protocol
SLE-MLSQOS-MIB ·
.1.3.6.1.4.1.6296.101.28.3.2.10
Object
scalar
r/w
Integer32
ACL protocols to be matched. 0-255 : IANA protocol numbers 256 - any Some important protocol Numbers GRE - 47 IGMP -2 IPV4 - 4 IPComp - 108 OSPF - 89 RSVP - 46 PIM - 103 VRRP - 112
Context
- MIB
- SLE-MLSQOS-MIB
- OID
.1.3.6.1.4.1.6296.101.28.3.2.10- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- sleMlsQosACLControl
- Siblings
- 23
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-256
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sleMlsQosACLControlRequest the configuration commands, and user can configure functions via setting this entry as proper value. | scalar | Enumeration | .1.3.6.1.4.1.6296.101.28.3.2.1 |
| sleMlsQosACLCtrlSrcAddress ACL SrcAddress.
1. MAC address
2. IP Address
3. Any | scalar | OctetString | .1.3.6.1.4.1.6296.101.28.3.2.11 |
| sleMlsQosACLCtrlDstAddress ACL SrcAddress.
1. MAC address
2. IP Address
3. Any | scalar | OctetString | .1.3.6.1.4.1.6296.101.28.3.2.12 |
| sleMlsQosACLCtrlSrcAddrMask ACL Src Addr Mask.
1. MAC address
2. IP Address | scalar | OctetString | .1.3.6.1.4.1.6296.101.28.3.2.13 |
| sleMlsQosACLCtrlDstAddrMask ACL dst Addr Mask.
1. MAC address
2. IP Address | scalar | OctetString | .1.3.6.1.4.1.6296.101.28.3.2.14 |
| sleMlsQosACLCtrlTcpUdpSrcPortAction TCP/UDP Port Action to be matched.
1 - equal
2 - not-equal
3 - less-than
4 - Greater-than
5 - Range | scalar | AclTcpUdpPortActionType | .1.3.6.1.4.1.6296.101.28.3.2.15 |
| sleMlsQosACLCtrlTcpUdpDstPortAction TCP/UDP Port Action to be matched.
1 - equal
2 - not-equal
3 - less-than
4 - Greater-than
5 - Range | scalar | AclTcpUdpPortActionType | .1.3.6.1.4.1.6296.101.28.3.2.16 |
| sleMlsQosACLCtrlTcpUdpSrcPort TCP/UDP Src port to be matched. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.28.3.2.17 |
| sleMlsQosACLCtrlTcpUdpDstPort TCP/UDP Dst port to be matched. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.28.3.2.18 |
| sleMlsQosACLCtrlAclNameExactMatch Configure Exact Match for Name | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.28.3.2.19 |
| sleMlsQosACLControlStatus status of user command. User have to check this value as .busy. or .idle. before do setRequest. | scalar | SLE-TC-MIBSleControlStatusType | .1.3.6.1.4.1.6296.101.28.3.2.2 |
| sleMlsQosACLCtrlActionRemarkDesc Configure remark description | scalar | OctetString | .1.3.6.1.4.1.6296.101.28.3.2.20 |
| sleMlsQosACLCtrlIcmpType The object is used to set the ICMP type of control message
Description Type Code
echo-reply … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.28.3.2.21 |
| sleMlsQosACLCtrlIcmpCode The object is used to set the ICMP code of control message
Description Type Code
echo-reply … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.28.3.2.22 |
| sleMlsQosACLCtrlTcpUdpSrcPortEnd End port for TCP/UDP Src port range to be matched. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.28.3.2.23 |
| sleMlsQosACLCtrlTcpUdpDstPortEnd End port for TCP/UDP Dst port range to be matched. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.28.3.2.24 |
| sleMlsQosACLConfigControlTimer the wait-time until setRequest end. In case of short-time command, this value is 0 | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.6296.101.28.3.2.3 |
| sleMlsQosACLControlTimeStamp the time stamp of the last command. (don.t care) | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.6296.101.28.3.2.4 |
| sleMlsQosACLControlReqResult Result of the last command. | scalar | SLE-TC-MIBSleControlRequestResultType | .1.3.6.1.4.1.6296.101.28.3.2.5 |
| sleMlsQosACLCtrlName Access Control List Name.
<1-99> standard access list
<100-199> extended access list
<1300-1999> standard access list (expanded range)
<2000-2699> extended access list … | scalar | OctetString | .1.3.6.1.4.1.6296.101.28.3.2.6 |
| sleMlsQosACLCtrlMatchType ACL Match Types
mac (1),
EthType(2),
l3Proto (3) | scalar | ACLMatchType | .1.3.6.1.4.1.6296.101.28.3.2.7 |
| sleMlsQosACLCtrlMatchAction ACL Actions
deny(0) deny the packets
permit(1) Permit packets
remark(2) mark the packets | scalar | ACLMatchActionType | .1.3.6.1.4.1.6296.101.28.3.2.8 |
| sleMlsQosACLCtrlEtherType ACL MAC ethertype to be matched.
WORD Ethertype value - (0x600-0xffff)
ip4 IPv4 Ethertype - 0x0800
ip6 IPv6 Ethertype - 0x86dd
mpls MPLS Ethertype - 0x8847 | scalar | ACLEtherType | .1.3.6.1.4.1.6296.101.28.3.2.9 |