sleMlsQosACLCtrlIcmpCode
SLE-MLSQOS-MIB ·
.1.3.6.1.4.1.6296.101.28.3.2.22
Object
The object is used to set the ICMP code of control message
Description Type Code
echo-reply 0 0
net-unreachable 3 0
host-unreachable 3 1
protocol-unreachable 3 2
port-unreachable 3 3
packet-too-big 3 4
source-route-failed 3 5
network-unknown 3 6
host-unknown 3 7
host-isolated 3 8
dod-net-prohibited 3 9
dod-host-prohibited 3 10
net-tos-unreachable 3 11
host-tos-unreachable 3 12
administratively-prohibited 3 13
host-precedence-unreachable 3 14
precedence-unreachable 3 15
source-quench 4 0
net-redirect 5 0
host-redirect 5 1
net-tos-redirect 5 2
host-tos-redirect 5 3
alternate-address 6 -1
echo 8 0
router-advertisement 9 0
router-solicitation 10 0
time-exceeded 11 -1
ttl-exceeded 11 0
reassembly-timeout 11 1
parameter-problem 12 -1
no-room-for-option 12 0
option-missing 12 1
timestamp-request 13 0
timestamp-reply 14 0
information-request 15 0
information-reply 16 0
mask-request 17 0
mask-reply 18 0
traceroute 30 -1
conversion-error 31 -1
mobile-redirect 32 -1
Context
- MIB
- SLE-MLSQOS-MIB
- OID
.1.3.6.1.4.1.6296.101.28.3.2.22- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- sleMlsQosACLControl
- Siblings
- 23
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sleMlsQosACLControlRequest the configuration commands, and user can configure functions via setting this entry as proper value. | scalar | Enumeration | .1.3.6.1.4.1.6296.101.28.3.2.1 |
| sleMlsQosACLCtrlL3Protocol ACL protocols to be matched.
0-255 : IANA protocol numbers
256 - any
Some important protocol Numbers
GRE - 47
IGMP -2
IPV4 - 4
IPComp - 108
OSPF - 89
RSVP - 46
PIM - 103
VRRP - … | scalar | Integer32 | .1.3.6.1.4.1.6296.101.28.3.2.10 |
| sleMlsQosACLCtrlSrcAddress ACL SrcAddress.
1. MAC address
2. IP Address
3. Any | scalar | OctetString | .1.3.6.1.4.1.6296.101.28.3.2.11 |
| sleMlsQosACLCtrlDstAddress ACL SrcAddress.
1. MAC address
2. IP Address
3. Any | scalar | OctetString | .1.3.6.1.4.1.6296.101.28.3.2.12 |
| sleMlsQosACLCtrlSrcAddrMask ACL Src Addr Mask.
1. MAC address
2. IP Address | scalar | OctetString | .1.3.6.1.4.1.6296.101.28.3.2.13 |
| sleMlsQosACLCtrlDstAddrMask ACL dst Addr Mask.
1. MAC address
2. IP Address | scalar | OctetString | .1.3.6.1.4.1.6296.101.28.3.2.14 |
| sleMlsQosACLCtrlTcpUdpSrcPortAction TCP/UDP Port Action to be matched.
1 - equal
2 - not-equal
3 - less-than
4 - Greater-than
5 - Range | scalar | AclTcpUdpPortActionType | .1.3.6.1.4.1.6296.101.28.3.2.15 |
| sleMlsQosACLCtrlTcpUdpDstPortAction TCP/UDP Port Action to be matched.
1 - equal
2 - not-equal
3 - less-than
4 - Greater-than
5 - Range | scalar | AclTcpUdpPortActionType | .1.3.6.1.4.1.6296.101.28.3.2.16 |
| sleMlsQosACLCtrlTcpUdpSrcPort TCP/UDP Src port to be matched. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.28.3.2.17 |
| sleMlsQosACLCtrlTcpUdpDstPort TCP/UDP Dst port to be matched. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.28.3.2.18 |
| sleMlsQosACLCtrlAclNameExactMatch Configure Exact Match for Name | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.28.3.2.19 |
| sleMlsQosACLControlStatus status of user command. User have to check this value as .busy. or .idle. before do setRequest. | scalar | SLE-TC-MIBSleControlStatusType | .1.3.6.1.4.1.6296.101.28.3.2.2 |
| sleMlsQosACLCtrlActionRemarkDesc Configure remark description | scalar | OctetString | .1.3.6.1.4.1.6296.101.28.3.2.20 |
| sleMlsQosACLCtrlIcmpType The object is used to set the ICMP type of control message
Description Type Code
echo-reply … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.28.3.2.21 |
| sleMlsQosACLCtrlTcpUdpSrcPortEnd End port for TCP/UDP Src port range to be matched. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.28.3.2.23 |
| sleMlsQosACLCtrlTcpUdpDstPortEnd End port for TCP/UDP Dst port range to be matched. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.28.3.2.24 |
| sleMlsQosACLConfigControlTimer the wait-time until setRequest end. In case of short-time command, this value is 0 | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.6296.101.28.3.2.3 |
| sleMlsQosACLControlTimeStamp the time stamp of the last command. (don.t care) | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.6296.101.28.3.2.4 |
| sleMlsQosACLControlReqResult Result of the last command. | scalar | SLE-TC-MIBSleControlRequestResultType | .1.3.6.1.4.1.6296.101.28.3.2.5 |
| sleMlsQosACLCtrlName Access Control List Name.
<1-99> standard access list
<100-199> extended access list
<1300-1999> standard access list (expanded range)
<2000-2699> extended access list … | scalar | OctetString | .1.3.6.1.4.1.6296.101.28.3.2.6 |
| sleMlsQosACLCtrlMatchType ACL Match Types
mac (1),
EthType(2),
l3Proto (3) | scalar | ACLMatchType | .1.3.6.1.4.1.6296.101.28.3.2.7 |
| sleMlsQosACLCtrlMatchAction ACL Actions
deny(0) deny the packets
permit(1) Permit packets
remark(2) mark the packets | scalar | ACLMatchActionType | .1.3.6.1.4.1.6296.101.28.3.2.8 |
| sleMlsQosACLCtrlEtherType ACL MAC ethertype to be matched.
WORD Ethertype value - (0x600-0xffff)
ip4 IPv4 Ethertype - 0x0800
ip6 IPv6 Ethertype - 0x86dd
mpls MPLS Ethertype - 0x8847 | scalar | ACLEtherType | .1.3.6.1.4.1.6296.101.28.3.2.9 |