sleHqosPolicyMapQueueControlParams
SLE-MLSQOS-MIB ·
.1.3.6.1.4.1.6296.101.28.10.2.8
Object
scalar
r/w
Enumeration
This object is used to set
1)shape: the shape for the policy map queue is to configure shaping on an egress
queue to impose a maximum rate on it
2)queue-limit: the Queue Limit is to configure tail drop by setting queue limits
on both ingress and egress queues
3)bandwidth: To allocate a minimum percentage of the interface bandwidth to a queue
4)bandwidth-Remain: To configures the bandwidth remaining on the interface in a queue
5)Priority: To configure a single output queuing class as the priority queue
average 1-1000000000(bps|kbps|mbps|gbps)
limit 1-131072 (packets | bytes | kbytes)
percent 1-100
Context
- MIB
- SLE-MLSQOS-MIB
- OID
.1.3.6.1.4.1.6296.101.28.10.2.8- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- sleHqosPolicyMapQueueControl
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | shape |
2 | queueLimit |
3 | bandwidth |
4 | bandwidthRemain |
5 | priority |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sleHqosPolicyMapQueueControlRequest the configuration commands, and user can configure
functions via setting this entry as proper value. | scalar | Enumeration | .1.3.6.1.4.1.6296.101.28.10.2.1 |
| sleHqosPolicyMapQueueControlUnits This object is used to set the units for the specified objects | scalar | Enumeration | .1.3.6.1.4.1.6296.101.28.10.2.10 |
| sleHqosPolicyMapQueueControlRDMiniThreshold his object is used to set the Minimum random threashold | scalar | Integer32 | .1.3.6.1.4.1.6296.101.28.10.2.11 |
| sleHqosPolicyMapQueueControlRDMaxThreshold This object is used to set the Maximum random threashold | scalar | Integer32 | .1.3.6.1.4.1.6296.101.28.10.2.12 |
| sleHqosPolicyMapQueueControlRDMinimumUnits This object is used to set the units for Random Minimum | scalar | Enumeration | .1.3.6.1.4.1.6296.101.28.10.2.13 |
| sleHqosPolicyMapQueueControlRDMaximumUnits This object is used to set the units for Random Maximum | scalar | Enumeration | .1.3.6.1.4.1.6296.101.28.10.2.14 |
| sleHqosPolicyMapQueueControlServicePolicyName This object is used to set the service name,
to attach a child policy onto a parent policy | scalar | OctetString | .1.3.6.1.4.1.6296.101.28.10.2.15 |
| sleHqosPolicyMapQueueControlStatus status of user command. User have to check this value as .busy. or .idle.
before do setRequest. | scalar | SLE-TC-MIBSleControlStatusType | .1.3.6.1.4.1.6296.101.28.10.2.2 |
| sleHqosPolicyMapQueueControlTimer the wait-time until setRequest end. In case of short-time command,
this value is 0 | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.6296.101.28.10.2.3 |
| sleHqosPolicyMapQueueControlTimeStamp the time stamp of the last command. (don.t care) | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.6296.101.28.10.2.4 |
| sleHqosPolicyMapQueueControlReqResult Result of the last command. | scalar | SLE-TC-MIBSleControlRequestResultType | .1.3.6.1.4.1.6296.101.28.10.2.5 |
| sleHqosPolicyMapQueueControlName This object is used to set the name for the policy map queue | scalar | OctetString | .1.3.6.1.4.1.6296.101.28.10.2.6 |
| sleHqosPolicyMapQueueControlClassMapQueueName This object is used to set the name for the policy map queue | scalar | OctetString | .1.3.6.1.4.1.6296.101.28.10.2.7 |
| sleHqosPolicyMapQueueControlParamsValue This object is used to set
1)shape: the shape for the policy map queue is to configure shaping on an egress
queue to impose a maximum rate on it
2)queue-limit: the Queue Limi… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.28.10.2.9 |