es1DcSys1CfgBatBoostTimeoutDuration

SITE-MONITORING-MIB · .1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.204
MIB view Table view

Object

scalar r/w SNMPv2-TCDisplayString 
Delay before an automatic stop (in seconds)

Context

MIB
SITE-MONITORING-MIB
OID
.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.204
Type
scalar
Access
readwrite
Status
current
Parent
es1DcSys1ConfigList
Siblings
63

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
es1DcSys1CfgBatMeasurementSourceVoltage
NA
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.100
es1DcSys1CfgBatMeasurementSourceCurrent
NA
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.101
es1DcSys1CfgBatCharacteristicsType
The chemistry of the installed battery.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.102
es1DcSys1CfgBatCharacteristicsNumberOfCells
Number of cells in each string. This is also valid if there is only one string
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.103
es1DcSys1CfgBatCharacteristicsStringCapacity
The capacity of each string in Ah
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.104
es1DcSys1CfgBatCharacteristicsNumberOfString
Number of string
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.105
es1DcSys1CfgBatAutonomyPeukertNumber
The Peukert number relates to the internal resistance of a battery and provides an indication of the expected capacity. The ideal number is 1. This value can be calculated with th…
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.106
es1DcSys1CfgBatAutonomyMaxDepthOfDischargeforEstimation
It is generally recommended to discharge maximum 60% of the battery capacity to enhance battery lifetime. By default, 100% is used for autonomy calculation. This parameter can als…
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.107
es1DcSys1CfgBatFloatVoltagePerCell
Value is in Volts with 2 decimals. This value should be found in battery's data sheet.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.111
es1DcSys1CfgBatFloatSource
NA
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.112
es1DcSys1CfgBatCurrentLimitationEnabled
This allows to enable or disable the charging current limitation. It is highly recommended to leave this parameter by default (enabled) in order to avoid severe damages.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.113
es1DcSys1CfgBatCurrentLimitationCurrentLimit
The max charging current can be computed using the installed capacity times the wished C rate. For the specific case of NiZn battery, the recommended standard charging current lim…
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.114
es1DcSys1CfgBatCurrentLimitationSource
NA
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.115
es1DcSys1CfgBatTempAlarmLowThreshold
The temperature under which the alarm 'Battery Temperature Too Low' must be set.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.121
es1DcSys1CfgBatTempAlarmHighThreshold
The temperature over which the alarm 'Battery Temperature Too High' must be set.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.122
es1DcSys1CfgBatTempAlarmHighHysteresis
NA
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.123
es1DcSys1CfgBatTempDisableChargeWhenTooHigh
Disable the charge when related alarm is set
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.126
es1DcSys1CfgBatTempCompensationEnabled
Temperature compensation configuration
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.151
es1DcSys1CfgBatTempCompensationCellCoefficient
Coefficient for temperature compensation per cell (in mV/degreeCelsius/cell)
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.152
es1DcSys1CfgBatTempCompensationReferenceTemp
Reference temperature for temperature compensation (in degree Celsius)
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.153
es1DcSys1CfgBatTempCompensationMinTemp
Below this temperature (in degree Celsius), the voltage corresponding to this threshold is applied continuously
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.154
es1DcSys1CfgBatTempCompensationMaxTemp
Above this temperature (in degree Celsius), the voltage corresponding to this threshold is applied continuously
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.155
es1DcSys1CfgBatBoostEnabled
Tick to enable boost charging
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.201
es1DcSys1CfgBatBoostVoltagePerCell
Boost charging voltage per cell (0,01V precision)
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.202
es1DcSys1CfgBatBoostTimeoutEnabled
Tick to enable an automatic stop after the configured delay
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.203
es1DcSys1CfgBatBoostStopOnLowCurrentEnabled
Tick to enable an automatic stop if the current goes below the configured threshold
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.205
es1DcSys1CfgBatBoostStopOnLowCurrentThreshold
Low current threshold for automatic stop (0,1A precision))
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.206
es1DcSys1CfgBatBoostStartOnLowCellVoltageEnabled
Tick to enable a boost if cell voltage drops below the configured threshold voltage
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.207
es1DcSys1CfgBatBoostStartOnLowCellVoltageThreshold
Low cell voltage start threshold (0,01V precision)
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.208
es1DcSys1CfgBatBoostStopOnTempHighEnabled
Tick to enable an automatic stop of the boost if the battery temperature exceeds the specified threshold
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.209
es1DcSys1CfgBatBoostStartOnLongDischargeEnabled
Tick to enable a boost if the discharge exceeds the configured duration
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.211
es1DcSys1CfgBatBoostStartOnLongDischargeThreshold
Minimal discharge duration for an automated boost (in seconds)
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.212
es1DcSys1CfgBatTestEnabled
Tick to enable battery testing
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.251
es1DcSys1CfgBatTestType
In DC + AC type, the system will discharge the battery at the configured constant power using AC and DC. In DC only mode, the converter will set its DC output voltage to the confi…
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.252
es1DcSys1CfgBatTestPowerSetpoint
If AC input reinjection is disabled, test power set point should be lower than AC output power. Set point is in Watts
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.253
es1DcSys1CfgBatTestTimeoutDuration
Duration timeout value
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.254
es1DcSys1CfgBatTestLowStop
Low voltage stop threshold per cell (0,01V precision)
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.255
es1DcSys1CfgBatTestScheduling
Scheduling enabled
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.261
es1DcSys1CfgBatTestSchedulerCronRule
NA
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.262
es1DcSys1CfgBatTestGuardTime
This parameter lets the user enable a minimum amount of time between two tests or between a discharge and a test
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.271
es1DcSys1CfgBatTestGuardTimeduration
Guard time duration in hours
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.272
es1DcSys1CfgBatTestEnableACLossGuard
When enabled, automated test will fail if the last ac loss occured to close to the test.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.273
es1DcSys1CfgBatTestAcLossGuardValue
Minimal time (in hours) between a loss of ac and the start of an automated test.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.274
es1DcSys1CfgBatDisconnectGlobalPresence
Low Voltage Disconnect settings
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.301
es1DcSys1CfgBatDisconnectGlobalInhibit
This setting allows the user to inhibit LVD operation and therefore to maintain LVD closed.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.302
es1DcSys1CfgBatDisconnectVoltageTooLowEnabled
Low Voltage Disconnect settings
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.310
es1DcSys1CfgBatDisconnectVoltageTooLowThreshold
Threshold voltage for opening (0,1V precision)
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.311
es1DcSys1CfgBatDisconnectGlobalClosingDelay
Delay before LVD closing
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.312
es1DcSys1CfgBatDisconnectGlobalOpeningDelay
Shutdown sequence duration (in seconds)
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.313
es1DcSys1CfgBatDisconnectTempTooHighEnabled
NA
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.321
es1DcSys1CfgBatDisconnectTempTooHighDisconnectThreshold
NA
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.322
es1DcSys1CfgBatDisconnectTempTooHighReconnectThreshold
NA
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.323
es1DcSys1CfgBatStringsMidpointUnbalanceAlarmThreshold
NA
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.350
es1DcSys1CfgBatStringsMidpointUnbalanceAlarmHysteresis
NA
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.351
es1DcSys1CfgLoadNumberofLoads
Number of independent load
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.401
es1DcSys1CfgDCBusVoltageAlarmLowThreshold
The bus voltage under which the alarm 'DC Bus Voltage Low' is set.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.50
es1DcSys1CfgDCBusVoltageAlarmLowClearThreshold
The bus voltage over which the alarm 'DC Bus Voltage Low' is unset.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.51
es1DcSys1CfgDCBusVoltageAlarmHighThreshold
The bus voltage under which the alarm 'DC Bus Voltage Low' is set.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.52
es1DcSys1CfgDCBusVoltageAlarmHighClearThreshold
The bus voltage over which the alarm 'DC Bus Voltage Low' is unset.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.53
es1DcSys1CfgGenericEventsEventTableLength
The maximum length of the table. The value must be comprised between 10 and 4000
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.601
es1DcSys1CfgBatGlobalPresence
NA
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.90
es1DcSys1CfgPLCGlobalNumberOfCustomData
The number of PLC data. Every equipment can manage up to 30 user programmable data. Data elements are automatically added in the data table. Configuration parameters are added to …
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.901
es1DcSys1CfgPLCGlobalNumberOfCustomAlarm
The number of PLC alarm. Every equipment can manage up to 30 user programmable alarms. Alarm elements are automatically added in the alarm table. The alarm parameters are added to…
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.12551.20.1.20.1.20.1.15.3.902