sfpDiagMonitorCode
SIAE-SFP-MIB ·
.1.3.6.1.4.1.3373.1103.74.2.1.8
Object
column
Bits
This indicates which type of diagnostic monitoring is
implemented (if any) in the SFP.
-bit 7: = 0 legacy diagnostic implementations (should be 0)
-bit 6: = 1 digital diagnostic monitoring implemented (should be 1)
-bit 5: = 1 internal calibration
-bit 4: = 1 external calibration mask
-bit 3: = 0 OMA received power measurment,
= 1 average received power
-bit 2: = 1 I2C addressing option.
Located at I2C address 0xa0, byte: 92
Context
- MIB
- SIAE-SFP-MIB
- OID
.1.3.6.1.4.1.3373.1103.74.2.1.8- Type
- column
- Access
- readonly
- Status
- current
- Parent
- sfpSerialIdEntry
- Table
- sfpSerialIdTable
- Siblings
- 19
Syntax
Bits
Values & Constraints
Enumerated Values
0 | sfpDMCtypeLegacy |
1 | sfpDMCtypeImplemented |
2 | sfpDMCtypeInternalCal |
3 | sfpDMCtypeExternalCal |
4 | sfpDMCtypeRxAvgPwr |
5 | sfpDMCtypeAddrChngReqrd |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sfpModuleId This index identifies a unique SFP module in the system | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.74.2.1.1 |
| sfpOptions Implemented transceiver options:
-bit 5: = 1 RATE_SELECT implemented.
-bit 4: = 1 TX_DISABLE implemented
-bit 3: = 1 TX_FAULT implemented
-bit 2: = 1 LOS Implemented, inverted
-bi… | column | Bits | .1.3.6.1.4.1.3373.1103.74.2.1.10 |
| sfpFibreChannelMedia Fiber Channel transmission media.
Located at I2C address 0xa0, byte: 9 | column | Bits | .1.3.6.1.4.1.3373.1103.74.2.1.11 |
| sfpCompliance Electronic or optical interfaces that are supported by the
transceiver.
Located at I2C address 0xa0, bytes: 4,5 & 6 | column | Bits | .1.3.6.1.4.1.3373.1103.74.2.1.12 |
| sfpWavelength Nominal transmiter output wavelength at room temperature.
Units are in nm (nanometers).
Located at I2C address 0xa0, bytes: 60 & 61 (endianess: big) | column | nm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.74.2.1.13 |
| sfpNominalBitRate Nominal bit rate (in megabit per second) supported from this
SFP module rouded to the nearest 100 megabits per second.
Located at I2C address 0xa0, byte: 12 | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.74.2.1.14 |
| sfpLinkLength9u Link length (in meters) supported from this SFP module while
operating in compliance with the applicable standards using single
mode fiber. A value of zero means that the transcei… | column | m SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.74.2.1.15 |
| sfpLinkLength50u Link length (in meters) supported from this SFP module while
operating in compliance with the applicable standards using
50 micron multi-mode fiber. A value of zero means that the… | column | m SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.74.2.1.16 |
| sfpLinkLength62u5 Link length (in meters) supported from this SFP module while
operating in compliance with the applicable standards using
62.5 micron multi-mode fiber. A value of zero means that t… | column | m SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.74.2.1.17 |
| sfpLinkLengthCopper Link length (in meters) supported from this SFP module while
operating in compliance with the applicable standards using
copper cable. A value of zero means that the transceiver d… | column | m SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.74.2.1.18 |
| sfpLabel This is an ASCII string that identifies this SFP in the
system. | column | OctetString | .1.3.6.1.4.1.3373.1103.74.2.1.19 |
| sfpSerialIdValid When false the SFP data in this table is not valid. This
will be set to False if the SFP module is not installed or if
the EEPROM check code is wrong. The data in this table shoul… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3373.1103.74.2.1.2 |
| sfpFailAlarm SFP Module fail (module missing included) | column | SIAE-ALARM-MIBAlarmStatus | .1.3.6.1.4.1.3373.1103.74.2.1.20 |
| sfpVendorName The SFP vendor name.
Located at I2C address 0xa0, bytes: 20 - 35 | column | OctetString | .1.3.6.1.4.1.3373.1103.74.2.1.3 |
| sfpVendorPartNumber The SFP vendor part number.
Located at I2C address 0xa0, bytes: 40 - 55 | column | OctetString | .1.3.6.1.4.1.3373.1103.74.2.1.4 |
| sfpVendorRev The SFP vendor's product revision number.
Located at I2C address 0xa0, bytes: 56 - 59 | column | OctetString | .1.3.6.1.4.1.3373.1103.74.2.1.5 |
| sfpVendorSN The SFP vendor serial number.
Located at I2C address 0xa0, bytes: 68 - 83 | column | OctetString | .1.3.6.1.4.1.3373.1103.74.2.1.6 |
| sfpVendorDateCode The SFP vendor date code.
Format: YYMMDDLL
- YY: year, 00 = 2000
- MM: month, 01 = January
- DD_ day, 01 to 31
- LL: vendor lot code, or blank.
… | column | OctetString | .1.3.6.1.4.1.3373.1103.74.2.1.7 |
| sfpEnhancedOptionsCode This indicates which optional enhanced features are
implemented (if any) in the SFP.
Located at I2C address 0xa0, byte: 93 | column | Bits | .1.3.6.1.4.1.3373.1103.74.2.1.9 |