sfpCompliance

SIAE-SFP-MIB · .1.3.6.1.4.1.3373.1103.74.2.1.12
MIB view Table view

Object

column Bits 
Electronic or optical interfaces that are supported by the
transceiver.
Located at I2C address 0xa0, bytes: 4,5 & 6

Context

MIB
SIAE-SFP-MIB
OID
.1.3.6.1.4.1.3373.1103.74.2.1.12
Type
column
Access
readonly
Status
current
Parent
sfpSerialIdEntry
Table
sfpSerialIdTable
Siblings
19

Syntax

Bits

Values & Constraints

Enumerated Values
0sfpSonetReachSpecifier1
1sfpSonetReachSpecifier2
2sfpSonetOC48LongReach
3sfpSonetOC48IntermediateReach
4sfpSonetOC48ShortReach
5sfpSonetOC12LongReach
6sfpSonetOC12IntermediateReach
7sfpSonetOC12ShortReach
8sfpSonetOC3LongReach
9sfpSonetOC3IntermediateReach
10sfpSonetOC3ShortReach
11sfp1000BaseT
12sfp1000BaseCX
13sfp1000BaseLX
14sfp1000baseSX
15sfpBasePX
16sfpBaseBX10
17sfp100BaseFX
18sfp100BaseLX

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
sfpModuleId
This index identifies a unique SFP module in the system
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.1103.74.2.1.1
sfpOptions
Implemented transceiver options: -bit 5: = 1 RATE_SELECT implemented. -bit 4: = 1 TX_DISABLE implemented -bit 3: = 1 TX_FAULT implemented -bit 2: = 1 LOS Implemented, inverted -bi…
columnBits.1.3.6.1.4.1.3373.1103.74.2.1.10
sfpFibreChannelMedia
Fiber Channel transmission media. Located at I2C address 0xa0, byte: 9
columnBits.1.3.6.1.4.1.3373.1103.74.2.1.11
sfpWavelength
Nominal transmiter output wavelength at room temperature. Units are in nm (nanometers). Located at I2C address 0xa0, bytes: 60 & 61 (endianess: big)
columnnm SNMPv2-SMIInteger32.1.3.6.1.4.1.3373.1103.74.2.1.13
sfpNominalBitRate
Nominal bit rate (in megabit per second) supported from this SFP module rouded to the nearest 100 megabits per second. Located at I2C address 0xa0, byte: 12
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.1103.74.2.1.14
sfpLinkLength9u
Link length (in meters) supported from this SFP module while operating in compliance with the applicable standards using single mode fiber. A value of zero means that the transcei…
columnm SNMPv2-SMIInteger32.1.3.6.1.4.1.3373.1103.74.2.1.15
sfpLinkLength50u
Link length (in meters) supported from this SFP module while operating in compliance with the applicable standards using 50 micron multi-mode fiber. A value of zero means that the…
columnm SNMPv2-SMIInteger32.1.3.6.1.4.1.3373.1103.74.2.1.16
sfpLinkLength62u5
Link length (in meters) supported from this SFP module while operating in compliance with the applicable standards using 62.5 micron multi-mode fiber. A value of zero means that t…
columnm SNMPv2-SMIInteger32.1.3.6.1.4.1.3373.1103.74.2.1.17
sfpLinkLengthCopper
Link length (in meters) supported from this SFP module while operating in compliance with the applicable standards using copper cable. A value of zero means that the transceiver d…
columnm SNMPv2-SMIInteger32.1.3.6.1.4.1.3373.1103.74.2.1.18
sfpLabel
This is an ASCII string that identifies this SFP in the system.
columnOctetString.1.3.6.1.4.1.3373.1103.74.2.1.19
sfpSerialIdValid
When false the SFP data in this table is not valid. This will be set to False if the SFP module is not installed or if the EEPROM check code is wrong. The data in this table shoul…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.3373.1103.74.2.1.2
sfpFailAlarm
SFP Module fail (module missing included)
columnSIAE-ALARM-MIBAlarmStatus.1.3.6.1.4.1.3373.1103.74.2.1.20
sfpVendorName
The SFP vendor name. Located at I2C address 0xa0, bytes: 20 - 35
columnOctetString.1.3.6.1.4.1.3373.1103.74.2.1.3
sfpVendorPartNumber
The SFP vendor part number. Located at I2C address 0xa0, bytes: 40 - 55
columnOctetString.1.3.6.1.4.1.3373.1103.74.2.1.4
sfpVendorRev
The SFP vendor's product revision number. Located at I2C address 0xa0, bytes: 56 - 59
columnOctetString.1.3.6.1.4.1.3373.1103.74.2.1.5
sfpVendorSN
The SFP vendor serial number. Located at I2C address 0xa0, bytes: 68 - 83
columnOctetString.1.3.6.1.4.1.3373.1103.74.2.1.6
sfpVendorDateCode
The SFP vendor date code. Format: YYMMDDLL - YY: year, 00 = 2000 - MM: month, 01 = January - DD_ day, 01 to 31 - LL: vendor lot code, or blank. …
columnOctetString.1.3.6.1.4.1.3373.1103.74.2.1.7
sfpDiagMonitorCode
This indicates which type of diagnostic monitoring is implemented (if any) in the SFP. -bit 7: = 0 legacy diagnostic implementations (should be 0) -bit 6: = 1 digital diagnostic m…
columnBits.1.3.6.1.4.1.3373.1103.74.2.1.8
sfpEnhancedOptionsCode
This indicates which optional enhanced features are implemented (if any) in the SFP. Located at I2C address 0xa0, byte: 93
columnBits.1.3.6.1.4.1.3373.1103.74.2.1.9