ptpClockPPSInstanceCapability

SIAE-PTP-MIB · .1.3.6.1.4.1.3373.1103.100.9.1.1.2
MIB view Table view

Object

column SNMPv2-SMIUnsigned32 
This object is a bitmap and each bit represents 
a specific capability of the PPS or ToD interface.
Bit 0 : 1 = the interface can be used either in input or in output
            and the user can select the direction using ptpClockPPSDirection object; 
        0 = the interface can have one direction specified by the system, 
            in this case the ptpClockPPSDirection object is read only.
Bit 1 : 1 = the ToD interface allows more baudrate;
        0 = the ToD interface allows one only baudrate, fixed by system.

Context

MIB
SIAE-PTP-MIB
OID
.1.3.6.1.4.1.3373.1103.100.9.1.1.2
Type
column
Access
readonly
Status
current
Parent
ptpClockPPSDataSetEntry
Table
ptpClockPPSDataSetTable
Siblings
11

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ptpClockPPSInstanceIndex
This object specifies the id of PPS interface socket. It represents the id of ToD interface socket too.
columnClockPPSInstanceType.1.3.6.1.4.1.3373.1103.100.9.1.1.1
ptpClockToDDelay
This object specifies microseconds of delay between PPS edge and ToD data emitted, used only in output direction.
columnUnsigned32.1.3.6.1.4.1.3373.1103.100.9.1.1.10
ptpClockToDBaudrate
This object specifies the Baudrate of ToD signal in input or output direction.
columnUnsigned32.1.3.6.1.4.1.3373.1103.100.9.1.1.11
ptpClockToDFormat
This object specifies the format of ToD signal in input or output direction.
columnPtpClockToDFormatType.1.3.6.1.4.1.3373.1103.100.9.1.1.12
ptpClockPPSDirection
This object specifies the direction (input or output) of PPS signal and ToD data
columnEnumeration.1.3.6.1.4.1.3373.1103.100.9.1.1.3
ptpClockPPSLabel
This object specifies the label as appears near the PPS signal socket
columnOctetString.1.3.6.1.4.1.3373.1103.100.9.1.1.4
ptpClockPPSAdminStatus
This object is the administrive status of PPS interface and specifies whether the node is enabled for PTP input/output clocking using the PPS interface.
columnEnumeration.1.3.6.1.4.1.3373.1103.100.9.1.1.5
ptpClockPPSOffsetEnabled
This object specifies whether an offset is configured in order to compensate for a known phase error such as network asymmetry.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.3373.1103.100.9.1.1.6
ptpClockPPSOffsetValue
This object specifies the fixed offset signed value in nanoseconds configured to be added for the PPS output or input.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.1103.100.9.1.1.7
ptpClockToDLabel
This object specifies the label as appears near the ToD socket
columnOctetString.1.3.6.1.4.1.3373.1103.100.9.1.1.8
ptpClockToDAdminStatus
This object is the administrive status of PPS interface and specifies whether the ToD interface is enabled.
columnEnumeration.1.3.6.1.4.1.3373.1103.100.9.1.1.9