entNDataRate
SENAO-EOR7550-MIB ·
.1.3.6.1.4.1.14125.101.5.1.8
Object
scalar
r/w
Enumeration
This attribute specifies the 11n data rate
Context
- MIB
- SENAO-EOR7550-MIB
- OID
.1.3.6.1.4.1.14125.101.5.1.8- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- entWlanCommonInfo
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | auto |
1 | mcs0 |
2 | mcs1 |
3 | mcs2 |
4 | mcs3 |
5 | mcs4 |
6 | mcs5 |
7 | mcs6 |
8 | mcs7 |
9 | mcs8 |
10 | mcs9 |
11 | mcs10 |
12 | mcs11 |
13 | mcs12 |
14 | mcs13 |
15 | mcs14 |
16 | mcs15 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| entOpMode Get op mode: 0(AP), 1(Client bridge), 2(Client router),
3(WDS bridge), 4(WDS repeater), 5(Repeater ap), 6(Repeater station),
7(Disable) | scalar | Enumeration | .1.3.6.1.4.1.14125.101.7.1.1 |
| entBeaconInterval Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
This attribute specifies the number of TU that a station shall use
for scheduling Beacon transmissions | scalar | Integer32 | .1.3.6.1.4.1.14125.101.7.1.10 |
| entDTIMPeriod Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
This attribute specifies the number of beacon intervals | scalar | Integer32 | .1.3.6.1.4.1.14125.101.7.1.11 |
| entFragmentationThreshold This attribute shall specify the current maximum size, in octets,
of the MPDU that may be delivered to the PHY | scalar | Integer32 | .1.3.6.1.4.1.14125.101.7.1.12 |
| entRTSThreshold This attribute shall indicate the number of octets in an MPDU,
below which an RTS/CTS handshake shall not be performed. | scalar | Integer32 | .1.3.6.1.4.1.14125.101.7.1.13 |
| entChannelBandwidth This attribute specifies the channel bandwidth: 0(Auto 20/40 MHZ), 1(20 MHZ) | scalar | Integer32 | .1.3.6.1.4.1.14125.101.5.1.14 |
| entPreambleType This attribute specifies the preamble type: 1(Short), 2(Long) | scalar | Enumeration | .1.3.6.1.4.1.14125.101.7.1.15 |
| entCTSProtection Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
This attribute specifies the CTS protection: 0(Auto), 1(Always), 2(None) | scalar | Enumeration | .1.3.6.1.4.1.14125.101.7.1.16 |
| entRadio Set this attribute TUUE will enable the radio | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.14125.101.5.1.2 |
| entBand The wireless mode:
0(802.11 b/g),
1(802.11 b),
2(802.11 a),
4(802.11 g) | scalar | Enumeration | .1.3.6.1.4.1.14125.101.7.1.4 |
| entESSIDNum Only when op mode for Atheros is 0(AP),
set the Number of multiple ESSID | scalar | Integer32 | .1.3.6.1.4.1.14125.101.7.1.5 |
| entChannel Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
The current operating frequency channel | scalar | Integer32 | .1.3.6.1.4.1.14125.101.7.1.6 |
| entDataRate This attribute specifies the data rate at which the station may transmit data in Mbps
0(Auto), 1(1Mbps), 2(2Mbps), 5(5.5Mbps), 11(11Mbps), 6(6Mbps), 9(9Mbps), 12(12Mbps),
18(18Mb… | scalar | Enumeration | .1.3.6.1.4.1.14125.101.7.1.7 |
| entTxPower Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater),
The transmit power level: 10(%), 25(%), 50(%), 75(%), 90(%), 100(%) | scalar | Integer32 | .1.3.6.1.4.1.14125.101.7.1.9 |