entBeaconInterval

SENAO-EOR7550-MIB · .1.3.6.1.4.1.14125.101.5.1.10
MIB view Table view

Object

scalar r/w Integer32 
This attribute specifies the number of TU that a station shall use 
for scheduling Beacon transmissions

Context

MIB
SENAO-EOR7550-MIB
OID
.1.3.6.1.4.1.14125.101.5.1.10
Type
scalar
Access
readwrite
Status
current
Parent
entWlanCommonInfo
Siblings
14

Syntax

Integer32

Values & Constraints

Object Constraints
range: 20-1024

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
entOpMode
Get op mode: 0(AP), 1(Client bridge), 2(Client router), 3(WDS bridge), 4(WDS repeater), 5(Repeater ap), 6(Repeater station), 7(Disable)
scalarEnumeration.1.3.6.1.4.1.14125.101.7.1.1
entDTIMPeriod
Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), This attribute specifies the number of beacon intervals
scalarInteger32.1.3.6.1.4.1.14125.101.7.1.11
entFragmentationThreshold
This attribute shall specify the current maximum size, in octets, of the MPDU that may be delivered to the PHY
scalarInteger32.1.3.6.1.4.1.14125.101.7.1.12
entRTSThreshold
This attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed.
scalarInteger32.1.3.6.1.4.1.14125.101.7.1.13
entChannelBandwidth
This attribute specifies the channel bandwidth: 0(Auto 20/40 MHZ), 1(20 MHZ)
scalarInteger32.1.3.6.1.4.1.14125.101.5.1.14
entPreambleType
This attribute specifies the preamble type: 1(Short), 2(Long)
scalarEnumeration.1.3.6.1.4.1.14125.101.7.1.15
entCTSProtection
Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), This attribute specifies the CTS protection: 0(Auto), 1(Always), 2(None)
scalarEnumeration.1.3.6.1.4.1.14125.101.7.1.16
entRadio
Set this attribute TUUE will enable the radio
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.14125.101.5.1.2
entBand
The wireless mode: 0(802.11 b/g), 1(802.11 b), 2(802.11 a), 4(802.11 g)
scalarEnumeration.1.3.6.1.4.1.14125.101.7.1.4
entESSIDNum
Only when op mode for Atheros is 0(AP), set the Number of multiple ESSID
scalarInteger32.1.3.6.1.4.1.14125.101.7.1.5
entChannel
Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), The current operating frequency channel
scalarInteger32.1.3.6.1.4.1.14125.101.7.1.6
entDataRate
This attribute specifies the data rate at which the station may transmit data in Mbps 0(Auto), 1(1Mbps), 2(2Mbps), 5(5.5Mbps), 11(11Mbps), 6(6Mbps), 9(9Mbps), 12(12Mbps), 18(18Mb…
scalarEnumeration.1.3.6.1.4.1.14125.101.7.1.7
entNDataRate
This attribute specifies the 11n data rate
scalarEnumeration.1.3.6.1.4.1.14125.101.5.1.8
entTxPower
Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), The transmit power level: 10(%), 25(%), 50(%), 75(%), 90(%), 100(%)
scalarInteger32.1.3.6.1.4.1.14125.101.7.1.9