setOutletPowerupMode – SCHLEIFENBAUER-GENERIC-MIB

Object

column r/w Enumeration

Behaviour of outlets on power-up. 0 = off, 1 = same state as at power down use default switch delay, 2 = same state, but delayed by individual delay timer, 3 = Outlets will always stay on (even at power down!)

Context

MIB: SCHLEIFENBAUER-GENERIC-MIB
OID: .1.3.6.1.4.1.44568.1.1.4.1.1.7
Type: column
Access: readwrite
Status: current
Parent: deviceSettingsEntry
Table: deviceSettingsTable
Siblings: 8

Syntax

Enumeration

Values & Constraints

Enumerated Values

`0`	no-switching-on-powerup
`1`	system-wide-outlet-delay
`2`	system-wide-and-individual-outlet-delay
`3`	no-switching-on-power-down

Related Objects

Sibling Objects

Object	Type	Syntax	OID
settingsDeviceIndex A unique value for each PDU. Its value ranges between 1 and the value of pduCount.	column	Integer32	`.1.3.6.1.4.1.44568.1.1.4.1.1.1`
setCurrentDropDetection Enable or disable current drop detection (0 = disabled, 1 = enabled)	column	Enumeration	`.1.3.6.1.4.1.44568.1.1.4.1.1.2`
setFixedOutletDelay Minimal delay between relay switch requests in milliseconds. The minimum delay is 100ms.	column	100 SNMPv2-SMIInteger32	`.1.3.6.1.4.1.44568.1.1.4.1.1.3`
setHighlight Locate a unit. Set to '1' to switch on and to '0' to switch off this function.	column	Enumeration	`.1.3.6.1.4.1.44568.1.1.4.1.1.4`
setLedBrightness LED brightness setting for the light ring of a PDU	column	0.01% SNMPv2-SMIInteger32	`.1.3.6.1.4.1.44568.1.1.4.1.1.5`
setDisableOutletSwitching Setting this will disable all means of switching an outlet; only the powerup modes and delays will be respected (0 = disabled, 1 = enabled).	column	Enumeration	`.1.3.6.1.4.1.44568.1.1.4.1.1.6`
setSensorChangeAlertMode Enables the sensor channel change detection. 0 = off (default), 1 = on	column	Enumeration	`.1.3.6.1.4.1.44568.1.1.4.1.1.8`
setConfigUsbMode USB Mode. 0 = Disabled, 1 = Enabled	column	Enumeration	`.1.3.6.1.4.1.44568.1.1.4.1.1.9`