setCurrentDropDetection
SCHLEIFENBAUER-GENERIC-MIB ·
.1.3.6.1.4.1.44568.1.1.4.1.1.2
Object
column
r/w
Enumeration
Enable or disable current drop detection (0 = disabled, 1 = enabled)
Context
- MIB
- SCHLEIFENBAUER-GENERIC-MIB
- OID
.1.3.6.1.4.1.44568.1.1.4.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- deviceSettingsEntry
- Table
- deviceSettingsTable
- Siblings
- 8
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | disabled |
1 | enabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| settingsDeviceIndex A unique value for each PDU. Its value
ranges between 1 and the value of pduCount. | column | Integer32 | .1.3.6.1.4.1.44568.1.1.4.1.1.1 |
| setFixedOutletDelay Minimal delay between relay switch requests in milliseconds. The minimum delay is 100ms. | column | 100 SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.4.1.1.3 |
| setHighlight Locate a unit. Set to '1' to switch on and to '0' to switch off this function. | column | Enumeration | .1.3.6.1.4.1.44568.1.1.4.1.1.4 |
| setLedBrightness LED brightness setting for the light ring of a PDU | column | 0.01% SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.4.1.1.5 |
| setDisableOutletSwitching Setting this will disable all means of switching an outlet; only the powerup modes and delays will be respected (0 = disabled, 1 = enabled). | column | Enumeration | .1.3.6.1.4.1.44568.1.1.4.1.1.6 |
| setOutletPowerupMode Behaviour of outlets on power-up. 0 = off, 1 = same state as at power down use default switch delay, 2 = same state, but delayed by individual delay timer, 3 = Outlets will always… | column | Enumeration | .1.3.6.1.4.1.44568.1.1.4.1.1.7 |
| setSensorChangeAlertMode Enables the sensor channel change detection. 0 = off (default), 1 = on | column | Enumeration | .1.3.6.1.4.1.44568.1.1.4.1.1.8 |
| setConfigUsbMode USB Mode. 0 = Disabled, 1 = Enabled | column | Enumeration | .1.3.6.1.4.1.44568.1.1.4.1.1.9 |