outletApparentPower

SCHLEIFENBAUER-GENERIC-MIB · .1.3.6.1.4.1.44568.1.1.8.1.1.7
MIB view Table view

Object

column 0.01VA SNMPv2-SMIInteger32 
Output VA (volt-amps, in VA) 100x, MEASURED by the device using current and voltage measurements of an outlet.

Context

MIB
SCHLEIFENBAUER-GENERIC-MIB
OID
.1.3.6.1.4.1.44568.1.1.8.1.1.7
Type
column
Access
readonly
Status
current
Units
0.01VA
Parent
deviceOutletsEntry
Table
deviceOutletsTable
Siblings
22

Syntax

0.01VA SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
outletDeviceIndex
A unique value for each PDU. Its value ranges between 1 and the value of pduCount.
columnInteger32.1.3.6.1.4.1.44568.1.1.8.1.1.1
outletActualCurrent
Actual apparent 100x, RMS current per outlet.
column0.01A SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.8.1.1.10
outletActualVoltage
Actual voltage on outlet 100x.
column0.01V SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.8.1.1.11
outletType
Outlet types: 0: Unknown, 1: BS, 2: C13, 3: C13 IEC Lock, 4: C19, 5: C19 IEC Lock, 6: CEE 16A 1 phase, 7: CEE 16A 3 phase, 8: CEE 32A 1 phase, 9: CEE 32A 3 phase, 10: CEE 63A 1 ph…
column1 Enumeration.1.3.6.1.4.1.44568.1.1.8.1.1.12
outletPhase
A mapping to which input each outlet is connected to.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.8.1.1.13
outletCurrentState
The state of the outlet relay(s).
columnEnumeration.1.3.6.1.4.1.44568.1.1.8.1.1.14
outletApparentEnergy
The apparent accumulated energy VAh of each outlet 100x.
column5645VAh SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.8.1.1.15
outletCrestFactor
The crest factor per outlet 100x. the ratio of peak values to the effective value.
column0.01% SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.8.1.1.16
outletPeakCurrent
Peak apparent 100x, RMS current of an outlet; highest value since last reset of the peaks.
column0.01A SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.8.1.1.17
outletMaxRatedAmps
Outlet maximum rated current in A.
column1A SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.8.1.1.18
outletThd
Total harmonic distortion per outlet 100x.
column0.01% SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.8.1.1.19
outletIndex
An outlet index in pdu.
columnInteger32.1.3.6.1.4.1.44568.1.1.8.1.1.2
outletPowerCycle
Writing '1' will cause the outlet to power cycle.
column1 SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.8.1.1.20
outletPowerCycleDelay
Outlet individual power cycle timer. This is the amount, in seconds.
column1 SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.8.1.1.21
outletSwitchDelay
Delay before an individual outlet's relay switches on at power-up, in seconds.
column1 SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.8.1.1.22
outletBranch
A mapping to which branch each outlet is connected to.
column1 SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.8.1.1.23
outletName
User configurable naming of individual outlets.
columnOctetString.1.3.6.1.4.1.44568.1.1.8.1.1.3
outletEnergyTotal
Total kWh of selected outlet. This value is not resetable.
columnKWh SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.8.1.1.4
outletEnergySubtotal
kWh subtotal register of selected output.
columnKWh SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.8.1.1.5
outletActivePower
Output power (in W), MEASURED by the device x100 using current, voltage, and power factor measurements of an outlet.
column0.01W SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.8.1.1.6
outletReactivePower
Reactive power (volt-amps reactive, in VAR) 100x, MEASURED by the device.
column0.01VAR SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.8.1.1.8
outletPowerFactor
Power factor x100 per outlet.
column0.01% SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.8.1.1.9