inputApparentPower

SCHLEIFENBAUER-GENERIC-MIB · .1.3.6.1.4.1.44568.1.1.7.1.1.7
MIB view Table view

Object

column 0.01VA SNMPv2-SMIInteger32 
Input VA (volt-amps, in VA) 100x, MEASURED by the device using current and voltage measurements of a phase.

Context

MIB
SCHLEIFENBAUER-GENERIC-MIB
OID
.1.3.6.1.4.1.44568.1.1.7.1.1.7
Type
column
Access
readonly
Status
current
Units
0.01VA
Parent
deviceInputsEntry
Table
deviceInputsTable
Siblings
21

Syntax

0.01VA SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
inputDeviceIndex
A unique value for each PDU. Its value ranges between 1 and the value of pduCount.
columnInteger32.1.3.6.1.4.1.44568.1.1.7.1.1.1
inputActualCurrent
Actual apparent, RMS current of an input 100x.
column0.01A SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.7.1.1.10
inputActualVoltage
The actual voltage per input 100x.
column0.01V SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.7.1.1.11
inputFrequency
Frequency in Hz per input 100x.
column0.01Hz SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.7.1.1.12
inputApparentEnergy
The apparent accumulated energy VAh of each phase 100x.
column5645VAh SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.7.1.1.13
inputCrestFactor
The crest factor per input 100x. the ratio of peak values to the effective value.
column0.01% SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.7.1.1.14
inputPeakCurrent
Input peak apparent 100x, RMS current; highest value since last reset of the peaks.
column0.01A SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.7.1.1.15
inputMaxRatedAmps
Maximum rated current in A per input.
column1A SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.7.1.1.16
inputThd
Total harmonic distortion in percent per phase 100x.
column0.01% SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.7.1.1.17
inputType
Type of input.
column1 SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.7.1.1.18
inputMinVoltage
RMS voltage dip; lowest value since reset of dips.
column0.01V SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.7.1.1.19
inputIndex
Index of inputs.
columnInteger32.1.3.6.1.4.1.44568.1.1.7.1.1.2
inputMaxVoltage
RMS voltage peak; highest value since reset of peaks.
column0.01V SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.7.1.1.20
inputPhase
A mapping to which phase each input is connected to.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.7.1.1.21
inputStatusUnbalanced
The input unbalanced. 100x.
column0.01% SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.7.1.1.22
inputName
User configurable 64 character naming of the inputs or phases.
columnOctetString.1.3.6.1.4.1.44568.1.1.7.1.1.3
inputEnergyTotal
Either the only phase in a single phase measurement; or one of the three phases in a multiphase measurement. This value is not resetable.
columnKWh SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.7.1.1.4
inputEnergySubtotal
kWh subtotal register of the only phase in a single phase measurement; or one of three phases in a multiphase measurement.
columnKWh SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.7.1.1.5
inputActivePower
Input power (in W) x100, MEASURED by the device using current, voltage, and power factor measurements of a phase.
column0.01W SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.7.1.1.6
inputReactivePower
Reactive power (volt-amps reactive, in VAR) 100x, MEASURED by the device.
column0.01VAR SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.7.1.1.8
inputPowerFactor
The effective power factor for each input 100x.
column0.01% SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.7.1.1.9