inputActualCurrent
SCHLEIFENBAUER-GENERIC-MIB ·
.1.3.6.1.4.1.44568.1.1.7.1.1.10
Object
Actual apparent, RMS current of an input 100x.
Context
- MIB
- SCHLEIFENBAUER-GENERIC-MIB
- OID
.1.3.6.1.4.1.44568.1.1.7.1.1.10- Type
- column
- Access
- readonly
- Status
- current
- Units
- 0.01A
- Parent
- deviceInputsEntry
- Table
- deviceInputsTable
- Siblings
- 21
Syntax
0.01A SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| inputDeviceIndex A unique value for each PDU. Its value
ranges between 1 and the value of pduCount. | column | Integer32 | .1.3.6.1.4.1.44568.1.1.7.1.1.1 |
| inputActualVoltage The actual voltage per input 100x. | column | 0.01V SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.7.1.1.11 |
| inputFrequency Frequency in Hz per input 100x. | column | 0.01Hz SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.7.1.1.12 |
| inputApparentEnergy The apparent accumulated energy VAh of each phase 100x. | column | 5645VAh SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.7.1.1.13 |
| inputCrestFactor The crest factor per input 100x. the ratio of peak values to the effective value. | column | 0.01% SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.7.1.1.14 |
| inputPeakCurrent Input peak apparent 100x, RMS current; highest value since last reset of the peaks. | column | 0.01A SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.7.1.1.15 |
| inputMaxRatedAmps Maximum rated current in A per input. | column | 1A SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.7.1.1.16 |
| inputThd Total harmonic distortion in percent per phase 100x. | column | 0.01% SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.7.1.1.17 |
| inputType Type of input. | column | 1 SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.7.1.1.18 |
| inputMinVoltage RMS voltage dip; lowest value since reset of dips. | column | 0.01V SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.7.1.1.19 |
| inputIndex Index of inputs. | column | Integer32 | .1.3.6.1.4.1.44568.1.1.7.1.1.2 |
| inputMaxVoltage RMS voltage peak; highest value since reset of peaks. | column | 0.01V SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.7.1.1.20 |
| inputPhase A mapping to which phase each input is connected to. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.7.1.1.21 |
| inputStatusUnbalanced The input unbalanced. 100x. | column | 0.01% SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.7.1.1.22 |
| inputName User configurable 64 character naming of the inputs or phases. | column | OctetString | .1.3.6.1.4.1.44568.1.1.7.1.1.3 |
| inputEnergyTotal Either the only phase in a single phase measurement; or one of the three phases in a multiphase measurement. This value is not resetable. | column | KWh SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.7.1.1.4 |
| inputEnergySubtotal kWh subtotal register of the only phase in a single phase measurement; or one of three phases in a multiphase measurement. | column | KWh SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.7.1.1.5 |
| inputActivePower Input power (in W) x100, MEASURED by the device using current, voltage, and power factor measurements of a phase. | column | 0.01W SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.7.1.1.6 |
| inputApparentPower Input VA (volt-amps, in VA) 100x, MEASURED by the device using current and voltage measurements of a phase. | column | 0.01VA SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.7.1.1.7 |
| inputReactivePower Reactive power (volt-amps reactive, in VAR) 100x, MEASURED by the device. | column | 0.01VAR SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.7.1.1.8 |
| inputPowerFactor The effective power factor for each input 100x. | column | 0.01% SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.7.1.1.9 |