branchState
SCHLEIFENBAUER-GENERIC-MIB ·
.1.3.6.1.4.1.44568.1.1.9.1.1.14
Object
column
Enumeration
Power state of the branch, usable for determining if a branch is currently tripped. 0 = OK, 1 = Tripped.
Context
- MIB
- SCHLEIFENBAUER-GENERIC-MIB
- OID
.1.3.6.1.4.1.44568.1.1.9.1.1.14- Type
- column
- Access
- readonly
- Status
- current
- Parent
- deviceBranchesEntry
- Table
- deviceBranchesTable
- Siblings
- 21
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | ok |
1 | tripped |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| branchDeviceIndex A unique value for each PDU. Its value
ranges between 1 and the value of pduCount. | column | Integer32 | .1.3.6.1.4.1.44568.1.1.9.1.1.1 |
| branchActualCurrent Actual apparent 100x, RMS current of a branch. | column | 0.01A SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.9.1.1.10 |
| branchActualVoltage The actual voltage per branch x100. | column | 0.01V SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.9.1.1.11 |
| branchType Breaker type: 0: Unknown, 1: ETA (thermal, resettable), 2: HYMA (hydraulic magnetic), 3: MCB (thermal magnetic DIN), 4: MELT (small ceramic fuse), 5: REVOLVER (large ceramic fuse,… | column | 1 Enumeration | .1.3.6.1.4.1.44568.1.1.9.1.1.12 |
| branchPhase A mapping to which phase (input) each branch is connected to. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.9.1.1.13 |
| branchApparentEnergy The apparent accumulated energy VAh of each branch. 100x | column | 5645VAh SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.9.1.1.15 |
| branchCrestFactor The crest factor per branch 100x. the ratio of peak values to the effective value. | column | 0.01% SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.9.1.1.16 |
| branchPeakCurrent Branch peak apparent 100x, RMS current; highest value since last reset of the peaks. | column | 0.01A SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.9.1.1.17 |
| branchMaxRatedAmps Maximum rated current in A per branch (representing the breakerfuse value). | column | 1A SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.9.1.1.18 |
| branchThd Total harmonic distortion in percent per branch x100. | column | 0.01% SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.9.1.1.19 |
| branchIndex A branch index in pdu. | column | Integer32 | .1.3.6.1.4.1.44568.1.1.9.1.1.2 |
| branchMinVoltage RMS voltage dip per branch; lowest value since reset of dips. | column | 0.01V SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.9.1.1.20 |
| branchMaxVoltage RMS voltage peak per branch; highest value since reset of peaks. | column | 0.01V SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.9.1.1.21 |
| branchFrequency Frequency in Hz per branch 100x. | column | 0.01Hz SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.9.1.1.22 |
| branchName User configurable naming of a branch in 64 characters per branch. | column | OctetString | .1.3.6.1.4.1.44568.1.1.9.1.1.3 |
| branchEnergyTotal Branch energy total measurement in kWh. This value is not resetable. 24-bit little-endian integer. | column | KWh SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.9.1.1.4 |
| branchEnergySubtotal Branch energy subtotal measurement in kWh. Reset to zero with [rsbmks]. 24-bit little-endian integer. | column | KWh SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.9.1.1.5 |
| branchActivePower Branch power (in W) x100, MEASURED by the device using current, voltage, and power factor measurements of an branch. | column | 0.01W SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.9.1.1.6 |
| branchApparentPower Branch VA (volt-amps) 100x, MEASURED by the device using current and voltage measurements of an branch. | column | 0.01VA SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.9.1.1.7 |
| branchReactivePower Reactive power (volt-amps reactive, in VAR) of a branch x100, MEASURED by the device. | column | 0.01VAR SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.9.1.1.8 |
| branchPowerFactor The effective power factor per branch 100x. | column | 0.01% SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44568.1.1.9.1.1.9 |