branchMinVoltage

SCHLEIFENBAUER-GENERIC-MIB · .1.3.6.1.4.1.44568.1.1.9.1.1.20
MIB view Table view

Object

column 0.01V SNMPv2-SMIInteger32 
RMS voltage dip per branch; lowest value since reset of dips.

Context

MIB
SCHLEIFENBAUER-GENERIC-MIB
OID
.1.3.6.1.4.1.44568.1.1.9.1.1.20
Type
column
Access
readonly
Status
current
Units
0.01V
Parent
deviceBranchesEntry
Table
deviceBranchesTable
Siblings
21

Syntax

0.01V SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
branchDeviceIndex
A unique value for each PDU. Its value ranges between 1 and the value of pduCount.
columnInteger32.1.3.6.1.4.1.44568.1.1.9.1.1.1
branchActualCurrent
Actual apparent 100x, RMS current of a branch.
column0.01A SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.9.1.1.10
branchActualVoltage
The actual voltage per branch x100.
column0.01V SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.9.1.1.11
branchType
Breaker type: 0: Unknown, 1: ETA (thermal, resettable), 2: HYMA (hydraulic magnetic), 3: MCB (thermal magnetic DIN), 4: MELT (small ceramic fuse), 5: REVOLVER (large ceramic fuse,…
column1 Enumeration.1.3.6.1.4.1.44568.1.1.9.1.1.12
branchPhase
A mapping to which phase (input) each branch is connected to.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.9.1.1.13
branchState
Power state of the branch, usable for determining if a branch is currently tripped. 0 = OK, 1 = Tripped.
columnEnumeration.1.3.6.1.4.1.44568.1.1.9.1.1.14
branchApparentEnergy
The apparent accumulated energy VAh of each branch. 100x
column5645VAh SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.9.1.1.15
branchCrestFactor
The crest factor per branch 100x. the ratio of peak values to the effective value.
column0.01% SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.9.1.1.16
branchPeakCurrent
Branch peak apparent 100x, RMS current; highest value since last reset of the peaks.
column0.01A SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.9.1.1.17
branchMaxRatedAmps
Maximum rated current in A per branch (representing the breakerfuse value).
column1A SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.9.1.1.18
branchThd
Total harmonic distortion in percent per branch x100.
column0.01% SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.9.1.1.19
branchIndex
A branch index in pdu.
columnInteger32.1.3.6.1.4.1.44568.1.1.9.1.1.2
branchMaxVoltage
RMS voltage peak per branch; highest value since reset of peaks.
column0.01V SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.9.1.1.21
branchFrequency
Frequency in Hz per branch 100x.
column0.01Hz SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.9.1.1.22
branchName
User configurable naming of a branch in 64 characters per branch.
columnOctetString.1.3.6.1.4.1.44568.1.1.9.1.1.3
branchEnergyTotal
Branch energy total measurement in kWh. This value is not resetable. 24-bit little-endian integer.
columnKWh SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.9.1.1.4
branchEnergySubtotal
Branch energy subtotal measurement in kWh. Reset to zero with [rsbmks]. 24-bit little-endian integer.
columnKWh SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.9.1.1.5
branchActivePower
Branch power (in W) x100, MEASURED by the device using current, voltage, and power factor measurements of an branch.
column0.01W SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.9.1.1.6
branchApparentPower
Branch VA (volt-amps) 100x, MEASURED by the device using current and voltage measurements of an branch.
column0.01VA SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.9.1.1.7
branchReactivePower
Reactive power (volt-amps reactive, in VAR) of a branch x100, MEASURED by the device.
column0.01VAR SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.9.1.1.8
branchPowerFactor
The effective power factor per branch 100x.
column0.01% SNMPv2-SMIInteger32.1.3.6.1.4.1.44568.1.1.9.1.1.9