rcPTP1588SlaveMasteIP
RUGGEDCOM-PTP1588-MIB ·
.1.3.6.1.4.1.15004.4.12.1.8
Object
This parameter is specific to unicast transport and represents the IP address of the unicast PTP (Precision Time Protocol) master clock.
Context
- MIB
- RUGGEDCOM-PTP1588-MIB
- OID
.1.3.6.1.4.1.15004.4.12.1.8- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- rcPTP1588Base
- Siblings
- 25
Syntax
SNMPv2-SMIIpAddress
- Source
- SNMPv2-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcPTP1588ClkType PTP1588 Clock Type. | scalar | Enumeration | .1.3.6.1.4.1.15004.4.12.1.1 |
| rcPTP1588ServoStatus It Shows the status of clock servo.
Clock servo mechanism is use to discipline the system clock.
The lock status represents clock accuracy is with in the desired limits.
User migh… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.15004.4.12.1.10 |
| rcPTP1588SlaveFeqAdj This parameter shows the current amount of discipline applied to the
local frequency reference (TCXO), i.e. the amount of correction on this
system required to syntonize to the cu… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.15004.4.12.1.11 |
| rcPTP1588E2EDelay This parameter shows measured E2E (also called request-response)
delay between master and slave clocks | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.15004.4.12.1.12 |
| rcPTP1588GlobalEnable True if PTP is enabled globally. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.15004.4.12.1.13 |
| rcPTP1588GlobalP2PRequestInterval The PTP (Precision Time Protocol) Announce interval (mean time interval
between successive Announce messages) in seconds.
Interpretation placed on the value:
1: Announce value is … | scalar | Enumeration | .1.3.6.1.4.1.15004.4.12.1.14 |
| rcPTP1588GlobalE2ERequestInterval The PTP (Precision Time Protocol) Announce interval (mean time interval
between successive Announce messages) in seconds.
Interpretation placed on the value:
1: Announce value is … | scalar | Enumeration | .1.3.6.1.4.1.15004.4.12.1.15 |
| rcPTP1588Global1Step True if PTP is enabled globally. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.15004.4.12.1.16 |
| rcPTP1588ClkAnnounceInt The PTP (Precision Time Protocol) Announce interval (mean time interval
between successive Announce messages) in seconds.
Interpretation placed on the value:
1: Announce value is … | scalar | Enumeration | .1.3.6.1.4.1.15004.4.12.1.17 |
| rcPTP1588ClkAnnounceRcTout The AnnounceReceiptTimeout, an integral multiple of announceInterval. | scalar | Integer32 | .1.3.6.1.4.1.15004.4.12.1.18 |
| rcPTP1588ClkSyncInt The PTP (Precision Time Protocol) Sync interval (mean time interval
between successive Sync messages).
Interpretation placed on the value:
1: Sync interval value is 125 Millisecon… | scalar | Enumeration | .1.3.6.1.4.1.15004.4.12.1.19 |
| rcPTP1588EthPorts Selects which Ethernet ports will take part in PTP
(Precision Time Protocol) message exchanges. | scalar | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.15004.4.12.1.2 |
| rcPTP1588ClkDelayMech The propagation delay measuring option used by the port. For IEEE C37.238 compliant implementations this value shall be 2 (p2p). | scalar | Enumeration | .1.3.6.1.4.1.15004.4.12.1.20 |
| rcPTP1588ClkProfileId Indicates the PTP Profile in use. | scalar | Enumeration | .1.3.6.1.4.1.15004.4.12.1.21 |
| rcPTP1588ClkDomainNumber Selects the PTP (Precision Time Protocol) domain number. A PTP domain is a
logical grouping of PTP clocks that synchronize to each other using the PTP
protocol. | scalar | Unsigned32 | .1.3.6.1.4.1.15004.4.12.1.22 |
| rcPTP1588ClkNetProtocol Indicates Network Protocol in use. For IEEE C37.238 compliant implementations this value shall be 1 (ieee8023). | scalar | Enumeration | .1.3.6.1.4.1.15004.4.12.1.23 |
| rcPTP1588ClkVlanId Indicates VLAN ID in use.
-2 = PVID
-1 = Priority tagged
0 = Untagged
1 to 4094 = VID set | scalar | Integer32 | .1.3.6.1.4.1.15004.4.12.1.24 |
| rcPTP1588ClkPriority Indicates VLAN tag Priority in use. | scalar | Unsigned32 | .1.3.6.1.4.1.15004.4.12.1.25 |
| rcPTP1588ClkAccuracy This parameter allows the user to configure the desired clock accuracy. This
represents the instantaneous value of the time offset between master and slave
clocks. The system will… | scalar | Enumeration | .1.3.6.1.4.1.15004.4.12.1.26 |
| rcPTP1588StartUpWait This parameter in seconds provides the ability to bootstrap the PTP
network in an orderly fashion. | scalar | Integer32 | .1.3.6.1.4.1.15004.4.12.1.3 |
| rcPTP1588NetClass This parameter indicates all devices in the timing plane are IEEE1588 aware
(IEEE1588 network) or whether the timing plane includes non-IEEE1588 devices
as well (non-IEEE1588 net… | scalar | Enumeration | .1.3.6.1.4.1.15004.4.12.1.4 |
| rcPTP1588SlaveEthPort Selects the Ethernet port which will act as the Slave port when the device is
configured as a Boundary Clock. | scalar | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.15004.4.12.1.5 |
| rcPTP1588SlaveDomain Selects the PTP (Precision Time Protocol) domain number for the Slave Clock. A
PTP domain is a logical grouping of PTP clocks that synchronize to each other
using the PTP protoco… | scalar | Integer32 | .1.3.6.1.4.1.15004.4.12.1.6 |
| rcPTP1588SlaveAutoReg This parameter is specific to unicast transport. This parameter allows user to
auto register the slave clock to unicast master as specified by the 'Master IP
Address' attribute. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.15004.4.12.1.7 |
| rcPTP1588SlaveBackUpIP This parameter is specific to unicast transport and represents the IP address of the
unicast backup PTP (Precision Time Protocol) master clock. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.15004.4.12.1.9 |